【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
You have just deployed SNMPv3 in your environment， Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request？___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port？___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch？___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature， what is the effect on the parent signature and the family of subsignatures？___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected， the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks？___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device？___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection？___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing？___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication？___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning？___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5， but does not use encryption？___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist， using security intelligence to block illicit network activity. However， the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites？___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat（ins，any）dynamic interface】Which ty pe of NaT is configured on a Cisco ASA？___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network？___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration？___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS？___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security？___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true？ ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication，authorization，and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10？___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center？___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true？___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed？___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
推荐试题
【单选题】
以下PLC输入模块本身的故障描述正确的是___。1没有输入信号，输入模块指示灯不亮是输人模块的常见故障2PLC输入模块本身的故障可能性极小，故障主要来自外围的元件3输入模块电源接反会烧毁输入端口的元件4PIC输入使用内部电源时，给信号时指示灯不亮，可能是内部电源烧坏
A. 123
B. 234
C. 134
D. 123
【单选题】
以下PLC输入模块本身的故障描述不正确的是___。
A. 没有输入信号，输入模块指示灯不亮是输入模块的常见故障
B. 输入模块电源极性接反一般不会烧毁输入端口的元件
C. PLC输入模块的故障主要是由控制程序编制错误造成的
D. PLC输入使用内部电源，若接通信号时指示灯不亮，很可能是内部电源烧坏
【单选题】
PLC输入模块本身的故障描述不正确的是___。
A. 没有输入信号，输入模块指示灯不亮是输入的常见故障
B. PLC输入模块本身的故障可能性极小，故障主要来自外围的元件
C. 输入模块电源接反会烧毁输入端的元件
D. PLC输入使用内部电源给信号时，指示灯不亮，可能是内部电源烧坏
【单选题】
PLC输入模块的故障处理方法正确的是___。1有输入信号，但是输入模块指示灯不亮时应检查是不是输入直流电源的正负极接反2若一个LED逻辑指示灯变暗，而且根据编程器件监视器，处理器未识别输人，则输入模块可能存在故障3指示灯不亮，万用表检查有电压，直接说明输入模块烧毁4出现输入故障时，首先检查LED电源指示灯是否响应现场元件(如按钮、行程开关等)
A. 123
B. 234
C. 123
D. 134
【单选题】
PLC输入模块的故障处理方法正确的是___。
A. 有输入信号，但是输入模块指示灯不亮时，应检查是否输入直流电源正负极接反
B. 若一个LED逻辑指示器变暗，而且根据编程元件监视器，处理器未识别输人，则输入模块可能存在故障
C. 出现输入故障时，首先检查LED电源指示器是否响应现场元件(如按钮、行程开关等)
D. 以上都是
【单选题】
以下PLC输入模块的故障处理方法不正确的是___。
A. 有输入信号，但是输入模块指示灯不亮时，应检查是否输入直流电源正负极接反
B. 指示器不亮，万用表检查有电压，直接说明输入模块烧毁
C. 出现输入故障时，首先检查LED电源指示器是否响应现场元件(如按钮、行程开关等)
D. 若一个LED逻辑指示器变暗，而且根据编程器件监视器，处理器未识别输人，则输入模块可能存在故障
【单选题】
以下PLC输出模块故障分析处理描述不正确的是___。
A. PLC输出模块常见的故障包括供电电源故障、端子接线故障、模板安装故障、现场操作故障等
B. PLC输出模块没有按要求输出信号时，应先检查输出电路是否出现断路
C. PLC输出模块没有按要求输出信号时，要先检查接触器是否出现断路
D. PLC输出模块故障与控制程序没有直接关系
【单选题】
PLC输出模块没有输出信号，可能是___造成的。1输出供电有问题2输出电路出现断路，接线有松动3输出模块安装时出现问题4输出模块的元件损坏
A. 1234
B. 234
C. 134
D. 124
【单选题】
PLC输出模块没有信号输出，可能是___造成的。1PLC没有在RUN状态2端子接线出现断路3输出模块与CUP模块通信问题4电源供电出现问题
A. 124
B. 234
C. 134
D. 1234
【单选题】
PLC输出模块故障描述正确的是___。
A. PIC输出模块常见的故障可能是供电电源故障
B. PLC输出模块常见的故障可能是端子接线故障
C. PLC输出模块常见的故障可能是模块安装故障
D. 以上都是
【单选题】
将变频器与PLC等上位机配合使用时，应注意___。
A. 使用共同地线、最好接入噪声滤被器、电线各自分开
B. 不使用共同地线、最好接入噪声滤波器、电线汇总一起布置
C. 不使用共同地线、最好接入噪声滤波器、电线各自分开
D. 不使用共同地线、最好不接入噪声滤波器、电线汇总一起布置
【单选题】
反馈控制系统主要由___、比较器和控制器构成，利用输入与反馈两信号比较后的偏差作为控制信号来自动地纠正输出量与期望值之间的误差，是一种精确控制系统。
A. 给定环节
B. 补偿环节
C. 放大器
D. 检测环节
