【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
2.刀开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
3.行程开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
4.交流接触器的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
A. 频繁地
B. 偶尔
C. 手动
D. 不需
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
17.一般电气控制系统中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
18.交流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
19.直流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
20.接触器的额定电压应不小于主电路的___。
A. 短路电压
B. 工作电压
C. 最大电压
D. 峰值电压
【单选题】
21.接触器的额定电流应不小于被控电路的___。
A. 额定电流
B. 负载电流
C. 最大电流
D. 峰值电流
【单选题】
22.对于___工作制的异步电动机,热继电器不能实现可靠的过载保护。
A. 轻载
B. 半载
C. 重复短时
D. 连续
【单选题】
23.对于△接法的异步电动机应选用___结构的热继电器。
A. 四相
B. 三相
C. 两项
D. 单相
【单选题】
24.对于工作环境恶劣、启动频繁的异步电动机,所用热继电器热元件的额定电流可选为电动机额定电流的___倍。
A. 0.95~1.05
B. O.85~0.95
C. 1.05~1.15
D. 1.15~1.50
推荐试题
【单选题】
正常APU起动程序中,APU主电门按进后,什么时候按压“start”电门()___
A. 主电门上蓝色“ON”出现后
B. 可以马上按压“start”电门
C. 在APU进气门打开之后
D. 30秒之后
【单选题】
正常情况下,APU进气门作动筒是怎么作动的()___
A. 电控作动
B. 液压作动
C. 气动作动
D. 人工作动
【单选题】
正常情况下,当APU的齿轮箱上的滑油液面视窗观察到滑油处于“ADD”位时,说明()___
A. 油箱中已无滑油,需立即加油
B. 滑油量仅够飞行一个航班
C. 滑油量至少够APU运转60小时
D. 滑油量至少够APU运转120小时
【单选题】
正常情况下APU点火发生在下列哪个转速范围()___
A. 0%~60%
B. 7%~60%
C. 7%~95%
D. 7%~50%
【单选题】
APU主开关选择在ON位时___
A. ON”亮蓝色,APU系统被供电且APU在95%时起动,“AVAIL”亮
B. ON”亮蓝色,APU系统被供电,只要起动按钮按下且进气风门打开
C.  APU即起动
D. 以上都不对
【单选题】
APU引气由谁控制___
A. 电子控制盒(N%调节)
B. 无控制
C. 作为关断valve的APU引气valve
D. 以上都不对
【单选题】
在驾驶舱中,APU人工关车的可能性有哪些___
A. APU主开关按钮,APU防火按钮开关
B. APU主开关按钮
C. APU防火按钮开关,
D. 以上都不对
【单选题】
在地面时,APU速度是通过下面哪一项根据引气系统的要求确定___
A. 电子控制盒
B. 空调系统(area控制器)
C. 进气系统
D. 以上都不对
【单选题】
在何时起动按钮上的“AVAIL”(可用)灯亮:___
A. 外部电源断开
B. APUN值达到95%
C. APU电源被使用
D. 以上都不对
【单选题】
除了驾驶舱APU面板上的开关外,APU还可用下列哪些项关机:___
A. 关掉左燃油泵
B. 只按下APU防火按钮
C. 只按下外部内话面板上的APU关机按钮
D. 以上B和C均可
【单选题】
当APU工作时,APU燃油泵___
A. 当油箱压力不够时工作  
B. 所有时间都工作
C. 只在空中工作
D. 以上都不对
【单选题】
当APU主开关被按出时,APU正常关机在何时发生___
A. 在所有情况下,都有一个时间延迟
B. 如果APU引气被使用,经过一个时间延迟
C. 在所有情况下,都无时间延迟
D. 以上都不对
【单选题】
如使用引气,在人工紧急关车程序后,APU___
A. 立即停车
B. 继续工作4分钟
C. 继续工作60秒到最大120秒
D. 以上都不对
【单选题】
主开关在ON位时:___
A. APU开车
B. 电子控制盒被供电
C. 进气风门关闭
D. 以上都不对
【单选题】
APU的主要组件是什么___
A. 轴动力部件,载荷压气机,附件齿轮箱。
B. 压气机,燃烧室,涡轮。
C. 电气,引气,轴动力部件
D. 以上都不对
【单选题】
在何时,ECAM状态显示器上的APUN值变成琥珀色___
A. N>107%
B. N>102%
C. N>99%
D. 以上都不对
【单选题】
APU的FCU的作用___
A. 根据ECB的指令计算到燃烧室燃油量
B. 计算到燃烧室燃油量
C. 计算引气
D. 以上都不对
【单选题】
APU的滑油低压电门正确的是___
A. 给ECB滑油压力信号
B. 给ECAM滑油量指示
C. APU停车时,此电门不工作
D. 以上都不对
【单选题】
关于APU舱门说法正确的是:___
A. 开门前必须拔相应跳开关
B. 开门前不必拔相应跳开关
C. 关门前必须拔相应跳开关
D. 以上都不对
【单选题】
关于APU拆装说法全面的是___
A. 拆前需记录APU小时数
B. 安装APU后需吹除APU燃油管路的燃油
C. 灭火设备在现场
D. 以上都对
【单选题】
在CFDS的APU页面___
A. 可查询APU故障
B. 不可查询APU故障
C. 不可查阅APU小时数
D. 以上都不对
【单选题】
货舱门人工选择valve处绿灯亮表示:___
A. A.门完全打开并锁好
B. B.门完全关闭并锁好
C. C.黄系统压力正常
D. D.货舱门作动筒工作正常
【单选题】
货舱门操作由什么提供动力?___
A. A.绿系统泵
B. B.黄系统泵
C. C.蓝系统泵
D. D.电动
【单选题】
当客舱门滑梯预位时,从外部开门是否允许?___
A. A.预位手柄必须设在解除预位
B. B.不许开门
C. C.从外部开门滑梯自动解除预位
D. D.必须确保客舱无余压,且预位手柄解除预位
【单选题】
在客舱门观察窗上红灯闪烁,表示:___
A. A滑梯预位且发动机工作
B. B发动机停车,滑梯解除预位且客舱增压
C. C发动机工作,滑梯解除预位
D. D飞机正在高速滑行
【单选题】
整架飞机有几个电子舱门?___
A. A.2个
B. B.3个
C. C.4个
D. D.5个
【单选题】
A320有几个翼上应急门?___
A. A.无
B. B.2个
C. C.4个
D. D.6个
【单选题】
货舱门操作使用哪个液压系统液压力?___
A. A.绿系统
B. B.蓝系统
C. C.黄系统
D. D.任何一个都可以
【单选题】
客舱门滑梯气瓶压力指示怎样算正常?___
A. A.绿区.
B. B.红区.
C. C.零位.
D. D.最大刻度.
【单选题】
客舱门滑梯预位灯什么时候亮?___
A. A.滑梯预位时
B. B.滑梯预位时提起门手柄
C. C.客舱有剩余压力
D. D.客舱有剩余压力且拉开门手柄
【单选题】
客舱门靠什么保持与机身平行:___
A. A.导向臂
B. B.支撑臂
C. C.上下连杆
D. D.打开保持机构
【单选题】
客舱门应急作动气瓶的功用是什么?___
A. A.正常情况开,关门时缓冲
B. B.应急情况开门时助推
C. C.A和B
D. D.A和B都不对
【单选题】
增强型驾驶舱门有几个插销锁?___
A. A一个机械锁
B. B两个机械锁
C. C两个电磁机械锁
D. D三个电磁机械锁
【单选题】
客舱门打开,下ECAM门页面上有何指示?___
A. A绿色空心方框,绿色CABIN文字
B. B琥珀色空心方框,白色CABIN文字
C. C琥珀色实心方框,琥珀色CABIN文字
D. D绿色实心方框,琥珀色CABIN文字
【单选题】
对于增强型驾驶舱门,以下说法不正确的是:___
A. A采用防弹材料
B. B驾驶舱内加装了蜂鸣器和压力传感器
C. C正常向前打开,紧急时向后打开
D. D安装了三个电磁valve控制的机械锁
【单选题】
客舱未完全释压时门area有什么警告信息?___
A. A.一个闪烁的白灯
B. B.一个闪烁的红灯
C. C.一个闪烁的琥珀色灯
D. D.音响警告
【单选题】
下列说法正确的是?___
A. A.翼上应急出口锁销松出位是预位位
B. B.客舱门预位时手柄与门不贴平
C. C.货舱门在开启过程中绿灯亮
D. D.当双发停车滑梯不预位时,客舱外的人能够知道客舱内有残余压力
【单选题】
A320翼上应急滑梯气瓶在什么位置?___
A. A.主轮舱
B. B.前货舱
C. C.后货舱
D. D.后电子舱
【单选题】
Howistheoperatorwarned,whenthereisaresidualpressureinthecabin?___
A. A.Byawhiteflashinglight
B. B.Byaredflashinglight
C. C.Byaamberflashinglight
D. D.Byablueflashinglight
【单选题】
Whichmaintenancetaskmustbeperformedafteranemergencyopeningonapassengerdoor?___
A. A.Theoperatingstrikerleverhastobereplaced
B. B.Thediaphragm,inthemechanismhousing,andtheshearpinmustbereplaced
C. C.Thenitrogenbottlehastobereplaced
D. D.Thepassengerdoorhastobereplaced