【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
2.刀开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
3.行程开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
4.交流接触器的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
A. 频繁地
B. 偶尔
C. 手动
D. 不需
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
17.一般电气控制系统中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
18.交流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
19.直流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
20.接触器的额定电压应不小于主电路的___。
A. 短路电压
B. 工作电压
C. 最大电压
D. 峰值电压
【单选题】
21.接触器的额定电流应不小于被控电路的___。
A. 额定电流
B. 负载电流
C. 最大电流
D. 峰值电流
【单选题】
22.对于___工作制的异步电动机,热继电器不能实现可靠的过载保护。
A. 轻载
B. 半载
C. 重复短时
D. 连续
推荐试题
【填空题】
双周检作业中检受电弓碳滑板与弓角过渡流畅,且间隙不大于___,最低厚度不低于___。
【填空题】
受电弓需更换受电弓碳滑板时,须更换同弓角的___。
【填空题】
在车门锁闭状态下,行程开关S1 处于激活位置,指示器必须达到限位开关外壳上的凹陷处,滚轮杆和开关外壳之间间隙不少于___。
【填空题】
如闸瓦中间75mm 部分裂纹宽度施加时大于___,缓解时大于___,立即进行更换。
【填空题】
三月检空调系统空调柜内的空调档位应在___。
【填空题】
三月检受电弓阀箱及气路各接头检查要求防松线清晰无错位,气阀手柄与阀体处于___位置。
【填空题】
三月检受电弓接触压力的测量要求主风管压力在___及以上时,升弓后用弹簧秤测量受电弓和接触网的接触压力。
【填空题】
三月检无电作业受电弓升弓___时,确保受电弓弓角水平,检查碳滑板铝托架下表面和止挡杆之间有大于___的间隙。
【填空题】
三月检受电弓主风管压力在___及以上时, 升弓时间为___秒,降弓时间为___秒。
【填空题】
三月检手动检查刮雨器要求___电动喷水功能正常。
【填空题】
三月检检查轮对是否到限,轮径应大于___刻度线。
【填空题】
列车零速时,客室侧门可由乘客操作车门旁的___进行解锁开门,为乘客提供逃生通道。
【填空题】
1号线车门系统为___,开门时向外塞出。
【填空题】
门扇为___结构,外形的设计和车体外部形状一致,这就保证了门在关闭时,车门和车体的外表面平齐。
【填空题】
车门驱动系统通过___控制,控制依据来自门区域的信号以及来自司机台的信号执行。
【填空题】
门动作___由___驱动,由门控器控制。
【填空题】
客室车门滑车支架通过球形接头连接到___,传递门扇动作所需的开启和关门力。
【填空题】
客室门到位开关NO 触点用于___,NC 触点用于门内部的检测电路。
【填空题】
隔离锁与安装在车体框上的隔离开关装置配合以实现门的___隔离。
【填空题】
长沙地铁1号线列车司机室前窗玻璃采用夹层式透明___ 安全玻璃。
【填空题】
长沙地铁1号线车辆转向架轮对内侧距为___mm。
【填空题】
空气压缩机采用了由三相交流电机驱动的 ___空压机,它是压缩空气的产生装置。
【填空题】
长沙地铁1号线风源系统压力开关A9工作范围为___。
【填空题】
长沙地铁1号线供风系统主要由___、空气干燥过滤器、主风缸、车间供气设备、脚踏泵组成。
【填空题】
长沙地铁1号线每列车共装配有2台空气压缩机。其中一个为主压缩机,另一个作为辅助后备,只有当MR的压力下降到___以下的情况时,辅助后备压缩机才开始工作。
【填空题】
长沙地铁1号线压缩机组主要部件有空气过滤器、___、交流异步电动机、安全阀、冷却器等。
【填空题】
升弓装置仅安装在Mp 车上,给受电弓提供压缩空气。当列车的压缩空气耗尽时,升弓用的压缩空气可以通过___产生。
【填空题】
长沙地铁1号线制动控制模块集成了___、电子中继阀、变载荷阀、风缸,停放脉冲阀,压力开关和压力传感器等设备。
【填空题】
电子制动控制单元___ 是基于微处理器的电子控制单元,可以进行防滑控制和车辆的摩擦制动控制。
【填空题】
长沙地铁1号线的制动系统为车控方式,每节车配置一个___,用于本车的空气制动控制。
【填空题】
长沙地铁1号线减压阀的动作值为___ 。
【填空题】
列车常用制动模式具有___和冲动限制功能。___是为防止车辆在停车前的冲动,使车辆平稳停车,EBCU内部设定的执行程序。
【填空题】
长沙地铁1号线的制动系统为___方式,每节车配置一个制动控制模块,用于本车的空气制动控制。
【填空题】
长沙地铁1号线气制动防滑控制系统由电子制动控制单元以及___组成。
【填空题】
在每节车厢提供___用于车厢内出现紧急情况时乘客向司机室报警。
【填空题】
___为LCD高清显示屏,包含文字信息、开门侧指示灯,车站名称。
【填空题】
报站语音文件编码规则___。
【填空题】
对讲录音存储在司机室___的SD卡的根目录下,根据实时间对文件命名,可根据时间便捷的搜寻需要的录音文件。
【填空题】
PIS系统广播音频都存储在一张___卡上。
【填空题】
PIS系统广播音频文件格式为___格式。