【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
2.刀开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
3.行程开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
4.交流接触器的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
A. 频繁地
B. 偶尔
C. 手动
D. 不需
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
17.一般电气控制系统中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
18.交流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
19.直流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
20.接触器的额定电压应不小于主电路的___。
A. 短路电压
B. 工作电压
C. 最大电压
D. 峰值电压
【单选题】
21.接触器的额定电流应不小于被控电路的___。
A. 额定电流
B. 负载电流
C. 最大电流
D. 峰值电流
【单选题】
22.对于___工作制的异步电动机,热继电器不能实现可靠的过载保护。
A. 轻载
B. 半载
C. 重复短时
D. 连续
【单选题】
23.对于△接法的异步电动机应选用___结构的热继电器。
A. 四相
B. 三相
C. 两项
D. 单相
推荐试题
【判断题】
应加强机房管理,杜绝因人为因素可能导致的网络故障
A. 对
B. 错
【判断题】
新定职、新转岗、新晋升人员须由铁路局(公司)或电务段依据岗位标准,进行岗前培训,考核合格并达到岗位任职条件后,方可上岗作业
A. 对
B. 错
【判断题】
信号机按类型分为色灯信号机、臂板信号机和机车信号机
A. 对
B. 错
【判断题】
信号及通信设备,应装有防止强电及雷电危害的保安设备,电子设备应符合电磁兼容有关规定
A. 对
B. 错
【判断题】
进站色灯信号机两个黄色灯光表示准许列车按限速要求越过该信号机,经道岔侧向位置进入站内通过
A. 对
B. 错
【判断题】
在进站端、出站端及区间适当地点设置点式应答器,必要时设置特定用途的应答器
A. 对
B. 错
【判断题】
计算机联锁在现场模拟联锁试验之前,电务段应进行全面的联锁仿真试验,并认真做好试验记录
A. 对
B. 错
【判断题】
计算机联锁设备试验应进行同步故障倒机及人工切换试验
A. 对
B. 错
【判断题】
架空线线路下面,地下光缆和电缆线路上面,禁止植树
A. 对
B. 错
【判断题】
直接涉及行车安全的TDCS、CTC等系统,必须自成体系,单独成网,独立运行,同时可以与其他系统直接联网
A. 对
B. 错
【判断题】
TDCS、CTC应实行系统冗余,局部故障有时可以影响整个系统
A. 对
B. 错
【判断题】
对设有加锁加封的信号设备,应加锁加封,必要时可装设计数器,电务人员应负责其完整
A. 对
B. 错
【判断题】
加封设备启封使用后,应及时通知车务部门加封
A. 对
B. 错
【判断题】
采用计算机联锁设备实现加锁加封功能时,应使用密码操作
A. 对
B. 错
【判断题】
在确定设置信号机地点时,除满足信号显示距离的要求外,还应考虑到该信号机不致被误认为邻线的信号机
A. 对
B. 错
【判断题】
主体信号机未开放时,进路信号机不能开放
A. 对
B. 错
【判断题】
当列控车载设备接收到轨道电路允许行车信息,而缺少应答器提供的线路数据或限速数据时,最高限速值为45km/h
A. 对
B. 错
【判断题】
自动闭塞区段的车站,办理发车前不应向接车站预告
A. 对
B. 错
【判断题】
道岔编号,从列车到达方向起顺序编号,上行为双号,下行为单号
A. 对
B. 错
【判断题】
出站信号机有两个及其以上的运行方向,而信号显示不能分别表示进路方向时,应在信号机上装设进路表示器
A. 对
B. 错
【判断题】
双线自动闭塞区间反方向进站信号机前方应设置预告标
A. 对
B. 错
【判断题】
信号机应设在列车运行方向的左侧或其所属线路的中心线上空
A. 对
B. 错
【判断题】
进站色灯信号机两个黄色灯光表示准许列车按限速要求越过该信号机,经道岔侧向位置进入站内通过
A. 对
B. 错
【判断题】
铁路运输企业应当按照国家有关规定,建立、健全本企业的应急预案,明确应急指挥、救援等事项
A. 对
B. 错
【判断题】
四显示自动闭塞区段的进站信号机前方第一、第二架通过信号机的机柱上,应分别涂三条、一条黑斜线,以与其他通过信号机相区别
A. 对
B. 错
【单选题】
关于安全生产工作的机制,表述错的是___:
A. 政府监管
B. 生产经营单位参与
C. 行业自律
D. 社会监督
【单选题】
公历的12月21日前后是___ 这一天是北半球冬季的开始。注意防寒 、保暖。
A. 大雪
B. 冬至
C. 小寒
【单选题】
依法为从业人员缴纳工伤保险和给予民事赔偿,是___的法定义务
A. 公司股东
B. 工会
C. 安全管理部门和从业人员
D. 生产经营单位
【单选题】
《安全生产法》共计有7章114条,其中条款最多的是___。
A. 第二章:生产经营单位的安全生产保障
B. 第三章:从业人员的权利和义务
C. 第四章:安全生产的监督管理
D. 第六章:法律责任
【单选题】
段防洪应急指导小组___指导基层单位开展一次应急演练,要熟知应急救援程序和工作任务。
A. 每年
B. 每半年
C. 每季度
【单选题】
下列选项中,___是从业人员必须履行的法定义务,这是保障从业人员人身安全和生产经营单位安全生产的需要。
A. 遵章守规、服从管理
B. 接受安全培训,掌握安全生产技能
C. 对佩戴和使用劳动防护用品
D. 发现事故隐患或者其他不安全因素及时报告
【单选题】
重大或特大级突发火灾事故发生后,应启动___应急响应。
A. 一级响应
B. 二级响应
C. 三级响应
【单选题】
触电事故中, 是导致人身伤亡的主要原因。___
A. 人体受到电流伤害
B. 烧伤
C. 电休克
【单选题】
《安全生产法》对___的安全生产工作任务、职责、措施、处罚等方面做出了明确的规定。
A. 各级行政机关及其安全生产监督管理部门
B. 各级行政机关及其生产经营单位主要负责人
C. 各级人民政府及其安全生产监督管理部门
D. 各级人民政府及其生产经营单位主要负责人
【单选题】
两个以上生产经营单位在同一作业区域进行生产经营活动,可能危及对方安全时,对的处理方式是___:
A. 互相提醒注意安全后继续进行各自的生产经营活动
B. 由各自安全主管部门确定生产经营活动方案
C. 各方自行采取安全措施
D. 签订安全生产管理协议,明确各自安全职责和应当采取的安全措施,并指定专职安全管理人员进行安全检查和协调
【单选题】
电冰箱的放置,其背部要与墙有___左右的距离,以保证散热。
A. 5厘米
B. 10厘米
C. 15厘米
【单选题】
无适当保存条件的散装食品保质期为烧熟后___,其再加热中心温度必须达到
A. 3小时,60℃
B. 2小时,70℃
C. 4小时,60℃
D. 1小时,100℃
【单选题】
任何单位、个人都有维护消防安全、保护___、预防火灾、报告火警的义务。
A. 消防环境
B. 公共设施
C. 消防设施
D. 工作场所
【单选题】
作为生产经营单位,其主要负责人不包括___:
A. 法人代表
B. 分管负责人
C. 安全管理机构负责人
D. 外设机构负责人
【单选题】
《安全生产法》确立了___的安全生产监督管理体制。
A. 国家监察与地方监管相结合
B. 国家监督与行业管理相结合
C. 综合监管与专项监管相结合
D. 行业管理与社会监督相结合