【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
推荐试题
【单选题】
两种APU的点火时间不同___
A. A.1,2,3
B. B.1,3,4
C. C.1,2,3,5
D. D.都正确
【单选题】
对于GTCP36-300APU起动机脱开转速是:___
A. A.N=50%
B. B.N=55%
C. C.N=95%
D. D.N=100%
【单选题】
GTCP36-300型号APU的压气机是什么型式的?___
A. A.两级离心式
B. B.单级离心式
C. C.三级轴向压气机
D. D.两级轴流式
【单选题】
APU主要由哪三个部分组成?___
A. A.压气机、燃烧室、涡轮
B. B.动力部分、负载压气机、燃油控制组件
C. C.动力部分、负载压气机、附件驱动齿轮箱
D. D.动子、静子、风扇
【单选题】
下列关于GTCP36-300APU说法正确的是:___
A. A.是独立的气源和电源供应部件
B. B.是个单轴的动力装置
C. C.由ECB全权控制运转
D. D.以上都对
【单选题】
关于APU引气控制valve(BCV)的正确说法是:___
A. A.GTCP36-300APU的BCV是电控气作动valve,同时具有防喘功能
B. B.APS3200APU没有专门的防喘valve,由BCV执行引气和防喘功能
C. C.GTCP36-300APU分别由BCV和SCV(防喘控制valve)执行引气和防喘功能
D. D.B和C都对
【单选题】
408.(A320)什么时候APU进气门打开:___
A. A.当APU提供引气和电源
B. B.点火开始时
C. C.主电门被按压时.
D. D.燃油valve打开后
【单选题】
409.(A320)什么时候开始点火:___
A. A.7%RPM
B. B.ATA75%RPM
C. C.95%RPM
D. D.0.5
【单选题】
410.(A320)下列关于APU说法正确的是:___
A. A.APU在任何工作状态下都可以提供引气或电源
B. B.若ECB故障,则APU无法正常工作
C. C.要关断APU,务必先关断APU的引气或电源负载
D. D.APU的正常工作转速是101%
【单选题】
411.(A320)?APU起动时,点火关断在:___
A. A.55%RPM
B. B.ATA75%RPM
C. C.95%RPM
D. D.100%RPM
【单选题】
412.(A320)?以下说法正确的是:___
A. A.APU任何高度都能供电
B. B.APU任何高度都能供气
C. C.APU供电和供气有高度限制
D. D.由控制人员确定
【单选题】
413.(A320)APU的ECU安装在什么位置?___
A. A.后货舱的右则
B. B.主设备舱
C. C.前货舱的右则
D. D.后客舱天花板上
【单选题】
414.(A320)APU的燃油来自:___
A. A.中央油箱
B. B.辅助油箱
C. C.2号主燃油箱
D. D.1号主燃油箱
【单选题】
415.(A320)APU的正常转速是___
A. A.0.95
B. B.1
C. C.1.01
D. D.1.07
【单选题】
416.(A320)APU的主要组件是什么?___
A. A.轴动力部件,载荷压气机,附件齿轮箱。
B. B.压气机,燃烧室,涡轮。
C. C.??电气,引气,轴动力部件。
D. D.滑油部件、燃油部件、气源部件
【单选题】
418.(A320)APU进气门电源是:___
A. A.28VDC
B. B.115VAC
C. C.220VAC
D. D.36VDC
【单选题】
419.(A320)APU起动前推荐的最小电瓶电压为:___
A. A.??22伏
B. B.25伏
C. C.27.5伏
D. D.无最小值
【单选题】
420.(A320)APU提供的引气来自于:___
A. A.压气机并通过防喘valve供给飞机气源系统
B. B.负载压气机并通过进口导向叶片供给飞机气源系统
C. C.压气机并通过引气valve供给飞机气源系统
D. D.负载压气机并通过引气valve供给飞机气源系统
【单选题】
421.(A320)APU提供电源和气源的原则是什么?___
A. A.电源优先
B. B.气源优先
C. C.根据飞机的需求确定
D. D.任何时候都可同时提供电源和气源
【单选题】
422.(A320)APU压气机是:___
A. A.轴流式
B. B.离心式
C. C.LRU
D. D.双转子
【单选题】
424.(A320)APU正常关车在哪里执行:___
A. A.APU控制面板(头顶)
B. B.火警面板
C. C.外电源控制面板.
D. D.ECB
【单选题】
425.(A320)APU转速显示在什么情况下会变为琥珀色?___
A. A.大于100%
B. B.大于105%
C. C.大于107%
D. D.大于110%
【单选题】
426.(A320)安装在A320飞机上的APU型号是什么?___
A. A.GTCP129
B. B131-9
C. C.GTCP36-300
D. D.GTCP331-500
【单选题】
427.(A320)从何处可以进行APU紧急关车___
A. A.APU控制面板,火警面板,外电源控制面板
B. B.加/抽油面板,外电源控制面板和驾驶舱
C. C.APU不能从飞机外部关车
D. D.火警面板或外电源控制面板
【单选题】
428.(A320)哪一个部件控制并监控APU:___
A. A.电子控制盒(ECB)
B. B.燃调
C. C.IGV控制组件
D. D.CFDS
【单选题】
429.(A320)起动APU前需要进行什么测试?___
A. A.APU火警测试
B. B.ECU测试
C. C.发动机火警测试
D. D.以上都是
【单选题】
430.(A320)起动APU之前必须检查下列哪些系统和参数?___
A. A.火警和电瓶电压
B. B.直流电源和交流电源的质量
C. C.地面服务汇流条的电源状况
D. D.进气门的位置
【单选题】
431.(A320)起动机马达在()关断:___
A. A.40%RPM
B. B.50%RPM
C. C.95%RPM
D. D.ATA75%
【单选题】
617.(A320)什么时候余油箱被排空:___
A. A.飞机速度大于200kts
B. B.飞机在地面
C. C.飞机高于2000英尺.
D. D.由飞行员控制
【单选题】
618.(A320)下列关于APU的指示说法正确的是:___
A. A.位于APU主电门上的“AVAIL”灯点亮表明APU处于正常工作状态
B. B.ECAM的APU页面出现“FUELLOPRESS”信息说明APU燃油泵没有工作
C. C.起动中当N>95%时,位于起动电门上的“AVAIL”灯和“ON”灯点亮
D. D.ECAM的APU页面出现“FLAPOPEN”信息表明进气门已完全打开
【单选题】
619.(A320)下列关于APU燃油供给正确的说法是:___
A. A.APU的燃油只能由一单相115VAC马达驱动的专用油泵供给
B. B.APU的燃油泵可以由电瓶通过静变流机供电
C. C.按压APU舱内的燃油通气按钮,APU的燃油泵不工作,APU低压关断valve打开
D. D.APU只能由左大翼油箱供给燃油
【单选题】
620.(A320)下列哪个部件由伺服燃油驱动___
A. A.IGV
B. B.BCV
C. C.APU进气门
D. D.A和B
【单选题】
621.(A320)用电瓶起动APU时,对高度有什么限制?___
A. A.只能在地面
B. B.在20000英尺以下
C. C.在25000英尺以下
D. D.无高度限制
【单选题】
622.(A320)在APU系统页上出现“FLAPOPEN”,表示:___
A. A.APU进气门打开
B. B.襟翼放出
C. C.襟翼断开
D. D.进气门打不开
【单选题】
623.(A320)在何时ECAM状态显示器上的APU排气温度指示变成红色:___
A. A.排气温度≥715℃(APU工作)
B. B.??排气温度≥1038℃(APU工作)
C. C.排气温度≥711℃(APU工作,外部空气温度15℃
D. D.????排气温度≥1038℃(APU起动时)
【单选题】
625.(A320)APU正常关断时___
A. A.进气门立即关闭
B. B.进口导向叶片(IGV)停留在关车前状态
C. C.引气valve停留在关车前状态,APU自动执行2分钟的冷却
D. D.防喘valve逐渐趋于打开位置
【单选题】
627.(A320)关于IGV说法不正确的是:___
A. A.当APU引气负载valve关闭时,IGV关闭(22度)
B. B.当APU提供引气用于空调时,IGV位置不受客舱温度选择值而影响
C. C.当APU提供引气用于发动机起动(MES)时,IGV打开最大(88度)
D. D.IGV是由燃油作动力的
【单选题】
628.(A320)滑油稀释valve什么时候工作?___
A. A.起动时0-60%
B. B.停车时90%-7%
C. C.起动时7%-55%
D. D.A和B
【单选题】
629.(A320)哪一个是APU起动时部件作动的顺序?___
A. A.进气门打开,起动马达接通,然后是点火和供油;
B. B.起动马达接通,进气门打开,然后是点火和供油;
C. C.进气门打开,点火,起动机马达接通,供油
D. D.点火,供油,然后是起动马达接通和进气门打开。
【单选题】
796.(A320)使用飞机电瓶重新启动APU的高度是多少?___
A. A.25000英尺。
B. B.31000英尺。
C. C.39000英尺。
D. D.10000英尺