【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
推荐试题
【单选题】
飞机位置等飞行信息在视频娱乐系统上的显示是如何实现的?___
A. 导航信息通过VSCU到显示器上
B. 导航信息通过DIU、VSCU到显示器上
C. 导航信息通过RCU、DIU、VSCU到显示器上
D. 不确定
【单选题】
有乘务员反映当进行广播时,视频节目会暂停,这是:___
A. 正常现象
B. 故障
C.
D.
【单选题】
电视显示器在何种情况下会自动收上?___
A. 当无电源时
B. 当客舱快速失压时
C. A和B
D. 不确定
【单选题】
PES中的VSCU组件可提供:___
A. 可播放录像带或光碟
B. 整个视频系统的控制中心
C. 整个视频、音频娱乐系统的控制中心
D. 不确定
【单选题】
增强型CIDS系统的指令器与老式指令器:___
A. 可互换
B. 在功能上有差异,不能互换
C.
D.
【单选题】
新式指令器与老式指令器相比,新增加的功能有:___
A. 客舱布局编程
B. 烟雾探测功能
C. 排放系统控制功能
D. B和C都正确
【单选题】
增强型CIDS系统中,编程功能是如何实现的?___
A. 在PTP面板上进行
B. 在FAP上进行
C. 在MCDU上进行
D. 不能编程
【单选题】
增强型CIDS系统中,测试功能是如何实现的?___
A. 在PTP面板上进行
B. 在FAP或MCDU上进行
C. 只在MCDU上进行
D. 不确定
【单选题】
新式CIDS,指令器的软件数据库如何装载?___
A. 通过数据装载机
B. 通过MCDU
C. 通过FAP,在接通电源时装载
D. 不确定
【单选题】
在新式CIDS系统中顶端的数据总线有一处断线,则:___
A. 该总线所连DEU的旅客相关功能关闭
B. 在断点以后的A类DEU无信号
C. 所有的A类DEU受影响
D. A和B都对
【单选题】
在新式CIDS系统中DEU安装架带有电源监控灯。当绿灯亮时:___
A. DCESSBUS供电
B. 勤务汇流条供电
C. 热电瓶汇流条供电
D. 不确定
【单选题】
FAP上屏幕显示何时关闭?___
A. 按压左下角的SCREENOFF按钮
B. 当无输入信号时间大于10分钟自动关闭
C. A和B
D. 不确定
【单选题】
ACP上的RESET键用于:___
A. A.复位系统,使其工作
B. B.取消所有已点亮的呼叫灯
C. C.取消以前的选择
D. D.取消所有音响
【单选题】
DEU的地址编码电门在:___
A. A.控制器内
B. B.DEU内
C. C.DEU安装底座内
D. D.PTP内
【单选题】
飞机上的DEUA有:___
A. A.4个
B. B.6个
C. C.13个
D. D.26个
【单选题】
完成主要的客舱系统空话子及监视功能的是:___
A. A.PTP
B. B.FAP
C. C.AAP
D. D.没有此功能面板。
【单选题】
用于选择通讯系统,控制接收音频信号强度的面板是:___
A. A.CALL面板
B. B.ACP
C. C.RMP
D. D.音频转换面板
【单选题】
在HF收发机前面板上的KEYINTERLOCK灯亮表示:___
A. A.收发机故障
B. B.控制盒故障
C. C.天线耦合器故障
D. D.没有故障
【单选题】
在VHF(甚高频)收发机的前面板上,TRANSMITPOWER灯在什么情况下点亮:___
A. A.接收时
B. B.发射功率小于10W
C. C.没有发射功率输出
D. D.发射功率大于10W
【单选题】
在放电刷检查过程中,放电刷前沿锈蚀不得超过放电刷宽度的:___
A. A.1/2
B. B.1/3
C. C.37990
D. D.2/3
【单选题】
在机长位置上,把机长音频控制板(ACP)上的ALT/NORM电门放ALT位置,哪个通信系统还可以正常工作:___
A. A.HF1
B. B.VHF2
C. C.全部
D. D.VHF1
【单选题】
HF收发机位于:___
A. A.机身41区
B. B.机身43区
C. C.机身46区
D. D.机身48区
【单选题】
当驾驶盘上的MIC/INT电门置于INT位时,以下说法正确的是:___
A. A.MIC音频直接接入飞行内话系统,不用在ACP上选择INT麦克风选择电门
B. B.要进入飞行内话系统还必须选择INT麦克风选择电门
C. C.要使MIC音频接入飞行内话系统,还必须将ACP上的R/T-I/C电门置于I/C位
D. D.以上说法都不对
【单选题】
当驾驶员呼叫服务员时,以下说法哪个正确:___
A. A.产生高谐音,驾驶舱的蓝色呼叫灯亮
B. B.产生高低谐音,客舱的粉红色主呼叫灯亮
C. C.产生高谐音,客舱的粉红色主呼叫灯亮
D. D.产生高谐音,客舱的黄色主呼叫灯亮
【单选题】
当接收到来自地面的选择呼叫时,驾驶舱:___
A. A.绿色警告灯亮
B. B.有高低谐音产生并且绿色的系统警告灯亮
C. C.有高谐音产生并且绿色的系统警告灯亮
D. D.有高低谐音产生
【单选题】
服务内话开关的作用是:___
A. A.当放在OFF位时,切断服务员内话的发话线
B. B.当放在ON位时,切断服务员内话的发话线
C. C.当放在OFF位时,切断各服务站位插孔的发话线
D. D.当放在ON位时,切断各服务站位插孔的发话线
【单选题】
机长呼叫服务员时,主呼叫灯保持点亮,其复位功能在:___
A. A.前顶板
B. B.机长的音频控制面板
C. C.任一个音频控制面板
D. D.任一个服务员面板
【单选题】
驾驶员呼叫地面人员时___
A. A.信号经P5送给REU的喇叭
B. B.信号经P5送给飞行仪表附件盒后再送给REU的喇叭
C. C.信号经P5送给飞行仪表附件盒后送给地面人员呼叫喇叭
D. D.信号直接送给地面人员呼叫喇叭
【单选题】
旅客广播放大器的音频输入信号中最优先的是:___
A. A.机上音乐
B. B.驾驶舱的广播
C. C.自动广播
D. D.服务员的广播
【单选题】
声音记录器整体抹音的条件是:___
A. A.飞机在地面并且放好轮档
B. B.飞机在空中并且高度大于1000英尺
C. C.飞机在地面并且按压P5板上的抹音开关
D. D.飞机在地面并且停留刹车已刹好
【单选题】
选择呼叫SELCAL是指:___
A. A.飞机对地面台进行选择呼叫
B. B.地面塔台对飞机进行选择呼叫
C. C.飞机上装有选择呼叫,来识别飞机号码
D. D.飞机上装有选择呼叫,就收不到地面台的呼叫
【单选题】
使用哪一个部件来装载CMSLRU的构形数据库.___
A. A.客仓area控制面板(CACP).
B. B.客仓系统控制面板(CSCP).
C. C.维护存取终端(MAT)
D. D.客仓系统管理组件(CSMU).
【单选题】
使用哪一个部件来做快速测试.___
A. A.CDU
B. B.CSCP.
C. C.CACP.
D. D.客仓服务员电话(CAH).
【单选题】
一个ARINC629总线由哪些部分组成.___
A. A.仅数据总线电缆.
B. B.短截线和电流式耦合器.
C. C.短截线,串行接口组件和终端控制器.
D. D.数据总线电缆,电流式耦合器和短截线.
【单选题】
在任何位置产生一个所有呼叫,驾驶仓的指示有:___
A. A.谐音和EICAS提醒信息:CABINCALL.
B. B.CDU上显示ALLCALL信息.
C. C.ACP上的CABCALL灯点亮.
D. D.以上所有.
【单选题】
RMP1上的SEL白色灯亮表示:___
A. A.RMP2上选择了VHF2的频率
B. B.RMP3上选择了VHF1的频率
C. C.RMP3上选择了VHF2的频率
D. D.RMP1接收到了选择呼叫信号
【单选题】
SELCAL编码面板位于:___
A. A.前电子设备架
B. B.前货舱
C. C.后电子设备架
D. D.后货舱
【单选题】
当FAP上的CIDSCAUTION灯亮时:___
A. A.在空中及地面可以复位
B. B.仅在地面可以复位
C. C.其相应故障信息显示在PTP上
D. D.其相应故障信息显示在ECAM上
【单选题】
当SELCAL信号由VHF1接收到时:___
A. A.ACP1上的琥珀色呼叫灯闪亮
B. B.RMP1上的白色SEL灯闪亮
C. C.三个ACP上的VHF1琥珀色呼叫灯闪亮
D. D.所有ACP上的所有琥珀色呼叫灯闪亮
【单选题】
关于静电放电刷,说法不正确的是:___
A. A.放电刷可以放掉飞行过程中积累在飞机上的静电
B. B.飞机上共装有41根放电刷,应至少保证有80%
C. C.根据位置不同,飞机上共有两种不同的放电刷
D. D.放电刷会由于放电而影响无线电通讯系统的接收