【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
推荐试题
【单选题】
(71804)轴温报警装置属于应急负载的48 V( )。[321110214](1.0分)___
A. 交直流用电器
B. 公共用电器
C. 交流用电器
D. 直流用电器
【单选题】
(71805)蓄电池用蒸馏水作电导实验时,其绝缘值应( )0.3 M 。[222120202](1.0分)___
A. 小于或等于
B. 小于或等于
C. 不大于
D. 不等于
【单选题】
(71806)蓄电池的容量C等于在( )的放电状况下,放电电流值I放和放电时间t放的乘积。[221110206](1.0分)___
A. 交变电流
B. 脉冲电流
C. 波动电流
D. 恒定电流
【单选题】
(71807)客车用的镉镍蓄电池的正极板上作用物质的化学符号是( )。[223110306](1.0分)___
A. NiOH
B. Ni(OH)2
C. Cd(OH)2
D. KOH
【单选题】
(71808)国际电工协会IEC标准规定:镉镍系列电池单只额定电压为( )。[222110202](1.0分)___
A. 1.2 V
B. 1.4 V
C. 1.5 V
D. 1.5 V
【单选题】
(71809)为保护电池,在电池放电时,当其电压降至( )时切断电池放电通路。[323110205](1.0分)___
A. 44 V±1 V
B. 46 V±1 V
C. 40 V±1 V
D. 42 V±1 V
【单选题】
(71810)25K型空调客车采用KC20型电力连接器和( )集控连接器。[322120313](1.0分)___
A. JBL2型
B. JL1型
C. JL2型
D. KCL1型
【单选题】
(71811)电力连接器检修时,压紧电缆端子的铜螺母,应使用专用扳手,控制扭矩在( )左右。[322110210](1.0分)___
A. 50 N•m
B. 60 N•m
C. 100 N•m
D. 30 N•m
【单选题】
(71812)客车逆变器工作时,输出电压为( )/50 Hz。[323110206](1.0分)___
A. AC380×(1±5%)V
B. AC220(1±5%)V
C. DC 220(1±5%)V
D. DC 380(1±5%)V
【单选题】
(71813)25T型客车在A2级修程落成后,满负载运行1 h试验,各接线处温度不得高于外温( )或实测温度不得高于85 ℃。[321110202](1.0分)___
A. 35 ℃
B. 40 ℃
C. 44 ℃
D. 30 ℃
【单选题】
(71814)电力连接器质量标准:( )无烧损、极性正确,接触良好,无锈蚀。[322110204](1.0分)___
A. 接线柱
B. 绝缘护套
C. 接线卡子
D. 接触对
【单选题】
(71815)25T型客车装有( )GNZ120-(4)型蓄电池。[323110205](1.0分)___
A. 60节
B. 80节
C. 90节
D. 100节
【单选题】
(71816)25T型客车的逆变器应可靠接地,可能触及的金属部件与( )的电阻应不大于0.1 。[322110202](1.0分)___
A. 电气元件外露处
B. 外壳接地点处
C. 导线金属暴露处
D. N线
【单选题】
(71817)25T型客车的接地点应有( )接地标志。[322110228](1.0分)___
A. 明显的
B. 红色的
C. 鲜艳的
D. 结实的
【单选题】
(71818)25K型空调客车的空调控制柜(KLC40C-1T1)的KM1和KM2是( )的接触器。[322110313](1.0分)___
A. 互为正连锁
B. 互为反连锁
C. 制冷回路
D. 取暖回路
【单选题】
(71819)25T型客车的逆变器在正常环境条件下,带电电路对地的绝缘电阻应大于( )。[323110202](1.0分)___
A. 20 M
B. 10 M
C. 15 M
D. 50 M
【单选题】
(71820)25T型客车的充电器输入输出电路( )。[322110202](1.0分)___
A. 必须隔离
B. 必须并联
C. 必须重联
D. 必须有明显标记
【单选题】
(71821)25T型客车的蓄电池组电压降到92 V±0.5 V时,( )应动作。[311120302(1.0分)___
A. 过压保护继电器
B. 欠压保护继电器
C. 过充保护继电器
D. 欠压保护接触器
【单选题】
(71822)MS730CP6C塞拉门是高速旅客列车使用的系列化外摆塞拉门,( )之分。[321110207](1.0分)___
A. 无左右
B. 有左右
C. 有上下
D. 无上下
【单选题】
(71823)MS730CP6C塞拉门是高速旅客列车使用的系列化外摆塞拉门,驱动方式为( )。[323110205](1.0分)___
A. 气动
B. 电动
C. 手动
D. 自动
【单选题】
(71824)25型空调控制柜(KLC40C-1T1)的1Q是控制电路的( )保护元件。[321110206](1.0分)___
A. 开路
B. 旁路
C. 支路
D. 短路
【单选题】
(71825)25K型空调客车的空调控制柜(KLC40C-1T1)能控制( )空调机组。[312110206](1.0分)___
A. 2套
B. 1套
C. 全列车
D. 厢部分车
【单选题】
(71826)25K型空调客车的空调控制柜(KLC40C-1T1)中的98号、100号线是( )。[311110228](1.0分)___
A. 温度控制线
B. 集控线
C. 延时控制线
D. 集中供电线
【单选题】
(71827)25型空调客车的过、欠压继电器的设定值是( )。[322110305](1.0分)___
A. 190~230 V
B. 187~253 V
C. 198~260 V
D. 195~240 V
【单选题】
(71828)25型空调客车KT1,KT2是( )的时间继电器。[311110206](1.0分)___
A. 延时断开
B. 瞬时断开
C. 延时闭合
D. 瞬时闭合
【单选题】
(71829)25K型空调客车的空调控制柜(KLC40C-1T1)中ATC的设定动差值是( )。[311110205](1.0分)___
A. 0.5
B. 1.5
C. 1.4
D. 1.0
【单选题】
(71830)25K型空调客车的空调控制柜(KLC40C-1T1)的FR1是( )的过载保护元件。[311120205](1.0分)___
A. 通风机
B. 压缩机
C. 冷凝机
D. 废排风机
【单选题】
(71831)25T型客车A4级修程即( )。[321110212](1.0分)___
A. 安全检修
B. 40万km段修
C. 80万km段修
D. 大修
【单选题】
(71832).电池盖上有极柱孔、( )及浮标孔。[323110205](1.0分)___
A. 观察孔
B. 检修孔
C. 注液孔
D. 排气孔
【单选题】
(71833)蓄电池的端电压随电池充放电的状态而( )。[323120205](1.0分)___
A. 升高
B. 降低
C. 变化
D. 不变
【单选题】
(71834)蓄电池由充电充足状态,放电至规定( )时所放出的总电量为蓄电池的容量。[322110205](1.0分)___
A. 电压
B. 终止电压
C. 电压的1/2
D. 全部电压
【单选题】
(71835).蓄电池放电至终了电压的快慢叫做( )。[323110206](1.0分)___
A. 放电速度
B. 容量
C. 放电率
D. 放电试验
【单选题】
(71836)蓄电池的内阻主要包括( )的电阻和电解液的电阻等。[221110206](1.0分)___
A. 导线
B. 极板
C. 接线柱
D. 作用物质
【单选题】
(71837)蓄电池的内阻与电解液的温度( )。211110206](1.0分)___
A. 没有关系
B. 成反比
C. 稍有关联
D. 成正比
【单选题】
(71838)表示蓄电池电量或能量( )的百分数称为蓄电池的效率。[212110206](1.0分)___
A. 使用率
B. 利用程度
C. 大小
D. 功率
【单选题】
(71839)JL1型连接器常态下绝缘电阻应不小于( )。[321110202](1.0分)___
A. 100 M
B. 200 M
C. 300 M
D. 500 M
【单选题】
(71840)JL1型连接器接触对直径为 2.5 mm时,其接触电阻应不大于( )。[322110202](1.0分)___
A. 0.2
B. 0.02
C. 0.002
D. 0.000 2
【单选题】
(71841)JL1型连接器恒定湿热试验48 h后,绝缘电阻不应小于( )。[211110202](1.0分)___
A. 0.2 M
B. 2 M
C. 20 M
D. 200 M
【单选题】
(71842)JL1型连接器湿热试验后,耐压试验电压为50 Hz,( ),耐压1 min。[212110202](1.0分)___
A. 1 000 V
B. 1 500 V
C. 2 000 V
D. 2 500 V
【单选题】
(71843)JL2型电力连接器耐压试验,常态下试验电压为50 Hz,( ),耐压1 min。[213110202](1.0分)___
A. 1 000 V
B. 1 500 V
C. 2 000 V
D. 2 500 V