【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
推荐试题
【单选题】
车辆在曲线轨道上抵抗倾覆的稳定程度,取决于___值的大小。
A. 偏心距
B. 向心力
C. 超高
D. 曲线半径
【单选题】
为保证行车安全,按《地铁设计规范》规定:实设最大超高,不得大于___。
A. 110mm
B. 120mm
C. 130mm
D. 140mm
【单选题】
我国规定,允许最大未被平衡欠超高,一般为___。
A. 60mm
B. 65mm
C. 70mm
D. 75mm
【单选题】
我国规定,允许最大未被平衡欠超高,一般为75mm,特殊情况为___。
A. 80mm
B. 90mm
C. 100mm
D. 110mm
【单选题】
城市轨道交通的现有运营线,最大外轨超高为___。
A. 100mm
B. 110mm
C. 120mm
D. 130mm
【单选题】
用10m弦测量矢度,允许误差正线及试车线不超过___。
A. 3mm
B. 4mm
C. 5mm
D. 6mm
【单选题】
用10m弦测量矢度,允许车辆段场线误差不超过___。
A. 3mm
B. 4mm
C. 5mm
D. 6mm
【单选题】
轨枕与道砟之间存在空隙超过___称为空板。
A. 5mm
B. 4mm
C. 3mm
D. 2mm
【单选题】
高低是指钢轨顶面沿钢轨方向的___凹凸不平顺。
A. 横向
B. 侧向
C. 竖向
D. 垂直
【单选题】
轨向是指钢轨头部内侧面沿钢轨方向的___凹凸不平顺。
A. 横向
B. 竖向
C. 垂直
D. 侧向
【单选题】
最大矢度是弦线与钢轨顶面之间的距离最大者。前后高低差用10m弦量不超过___。
A. 3mm
B. 4mm
C. 2mm
D. 1mm
【单选题】
处理高低及水平的方法根据高程误差的大小而不同,误差在___以内,采用垫板作业的方式。
A. 20mm
B. 30mm
C. 40mm
D. 50mm
【单选题】
当起道量超过___时,必须申报供电系统的接触网部门予以配合。
A. 20mm
B. 30mm
C. 40mm
D. 50mm
【单选题】
线路上先是左股钢轨高,后是右股钢轨高,当前后两点的水平正负误差的代数差超过___时为三角坑。
A. 2mm
B. 3mm
C. 4mm
D. 5mm
【单选题】
在检查三角坑时,基长为6.25m,但在延长___的距离内应不允许出现三角坑。
A. 15m
B. 16m
C. 17m
D. 18m
【单选题】
车轮踏面设计成锥形,踏面上有___个坡度
A. 两
B. 三
C. 四
D. 五
【单选题】
常与钢轨顶面接触的车轮踏面是___坡度的圆锥面。
A. ’1:5
B. ’1:10
C. ’1:20
D. ’1:30
【单选题】
在我国铁路运营的实践中,规定轨底坡为在我国铁路运营的实践中,规定轨底坡为___。
A. ’1:3
B. ’1:4
C. ’1:5
D. ’1:6
【单选题】
线路养护维修时,可根据___位置对轨底坡进行调整。
A. 钢轨内侧
B. 钢轨外侧
C. 接头
D. 光带
【单选题】
在正线上当曲线半径等于或小于___时,圆曲线与直线间应设置缓和曲线。
A. 1500m
B. 2000m
C. 2500m
D. 3000m
【单选题】
在正线上当曲线半径___2000m时,圆曲线与直线间应设置缓和曲线。
A. 等于或小于
B. 等于
C. 等于或大于
D. 大于
【单选题】
圆曲线的最小长度不应小于___。
A. 14m
B. 15m
C. 16m
D. 17m
【单选题】
相邻曲线间的的夹直线的长度,在有缓和曲线时,不小于___。
A. 15m
B. 14m
C. 13m
D. 12m
【单选题】
全轴距系指一节车辆第一位轴至最后位轴之间距离,目前我国地铁车辆的全轴距最大不超过___。
A. 10m
B. 15m
C. 20m
D. 25m
【单选题】
道岔应设在直线地段,道岔端部至曲线端部的距离不宜小于___,车场线可以减少到3m。
A. 2m
B. 3m
C. 4m
D. 5m
【单选题】
正线与联络线上曲线半径小于___时,直线与圆曲线间要设缓和曲线。
A. 1300m
B. 1400m
C. 1500m
D. 1600m
【单选题】
区间正线按行车速度80km/h选配,车站两端按___选配。
A. 60km/h
B. 70km/h
C. 80km/h
D. 90km/h
【单选题】
当圆曲线的曲率差大于1/2500时,应设置中间缓和曲线,其长度根据计算确定,困难情况下不得小于___。
A. 20m
B. 30m
C. 40m
D. 50m
【单选题】
车站站台段线路一般设在直线上,困难条件下可设在半径不小于___的曲线上。
A. 600m
B. 700m
C. 800m
D. 900m
【单选题】
对于连接市中心与周边卫星城的线路及开行大站快车线路,平均站间距离大,其最高运行速度应大于___。
A. 50 km/h
B. 60 km/h
C. 70 km/h
D. 80 km/h
【单选题】
测量现场正矢时,应在好天气下进行,弦线必须拉紧,弦线的两端位置和量尺位置要正确。测量时应在轨距线处量,有肥边应在肥边处量,肥边大于___时应铲除再量。
A. 2mm
B. 3mm
C. 4mm
D. 5mm
【单选题】
根据测试,当离心加速度在0.4~0.5m/s2时,乘客还能够在车厢内自由走动,而当超过___ 时就感到行动困难了。
A. 0.5m/s2
B. 0.6m/s2
C. 0.7m/s2
D. 0.8m/s2
【单选题】
为保证行车安全,按《地铁设计规范》规定:实设最大超高,不得大于___。
A. 100mm
B. 110mm
C. 120mm
D. 130mm
【单选题】
我国规定,允许最大未被平衡欠超高,一般为75mm,特殊情况为___。
A. 90mm
B. 95mm
C. 100mm
D. 150mm
【单选题】
城市轨道交通的现有运营线,最大外轨超高为___。
A. 90mm
B. 100mm
C. 110mm
D. 120mm
【单选题】
在困难条件下,车场线上的曲线轨距加宽,允许按不大于___。递减曲线轨道的最大轨距,应能够确保行车安全,不使之掉道。
A. 1‰
B. 2‰
C. 3‰
D. 4‰
【单选题】
曲线段,两股钢轨接头相错量不得超过___加所采用的缩短轨缩短量的一半。
A. 40mm
B. 50mm
C. 60mm
D. 70mm
【单选题】
规定按线路允许速度检算,未被平衡欠超高不得大于___,否则应进行调整。
A. 110mm
B. 120mm
C. 130mm
D. 140mm
【单选题】
联络线、出入线的最大坡度不宜大于___(均不考虑各种坡度折减值)
A. 10‰
B. 20‰
C. 30‰
D. 40‰
【单选题】
线路坡段长度不宜小于远期地铁列车长度,并应满足相邻竖曲线间的夹直线长度的要求,其夹直线长度不宜小于___。
A. 40m
B. 50m
C. 60m
D. 70m