【单选题】
关门车编入货物列车时,不得挂于机车后部___辆车之内。J262
A. 一
B. 两
C. 三
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
关门车编入货物列车时,在列车中连续连挂不得超过___辆。J262
A. 一
B. 两
C. 三
【单选题】
运行速度不超过120km/h的旅客列车(动车组列车除外)在任何线路上的紧急制动距离限值为___m。J263
A. 800
B. 1000
C. 1200
【单选题】
运行速度不超过120km/h的快速货物班列在任何线路上的紧急制动距离限值为___m。J263
A. 800
B. 1000
C. 1100
【单选题】
列车中相互连挂的车钩中心水平线的高度差,不得超过___mm。J264
A. 75
B. 80
C. 85
【单选题】
列车机车与第一辆车的连挂,由___负责。J266
A. 调车作业人员
B. 机车乘务员
C. 车站值班员
【单选题】
旅客列车运行途中遇车辆空气弹簧故障时,运行速度不得超过___km/h。J271
A. 100
B. 120
C. 140
【单选题】
采用密接式车钩的旅客列车,在运行途中因故障更换15号过渡车钩后,运行速度不得超过___km/h。J271
A. 100
B. 120
C. 140
【单选题】
列车停留超过___时,应对列车自动制动机应进行简略试验。 J274
A. 10min
B. 15min
C. 20min
【单选题】
挂有列尾装置的货物列车,对列车自动制动机进行简略试验时,由___负责。J274
A. 列检
B. 车站
C. 司机
【单选题】
调车作业由___单一指挥。J285
A. 调车领导人
B. 调车指挥人
C. 连结员
【单选题】
调车人员不足___人,不准进行调车作业。J291
A. 1
B. 2
C. 3
【单选题】
在调车作业中,单机运行或牵引车辆运行时,前方进路的确认由___负责。J292
A. 调车人员
B. 司机
C. 扳道员
【单选题】
调车作业要准确掌握速度,在空线上推进运行时,不准超过___km/h。J293
A. 30
B. 40
C. 45
【单选题】
电力机车在有接触网终点的线路上调车时,应控制速度,机车距接触网终点标应有___m 的安全距离。J293
A. 10
B. 20
C. 30
【单选题】
调动乘坐旅客或装载爆炸品、气体类危险货物、超限货物的车辆时,不准超过___km/h。J293
A. 10
B. 15
C. 20
【单选题】
调车作业要准确掌握速度,接近被连挂的车辆时,不准超过___km/h。J293
A. 3
B. 5
C. 7
【单选题】
调车作业要准确掌握速度,在空线上牵引运行时,不准超过___km/h J293
A. 15
B. 30
C. 40
【单选题】
在尽头线上调车时,距线路终端应有___m 的安全距离。J293
A. 10
B. 20
C. 30
【单选题】
线路两旁堆放货物,距钢轨头部外侧不得小于___m,不足规定距离时,不得进行调车作业。J297
A. 1
B. 1.5
C. 2
【单选题】
站台上堆放货物,距站台边缘不得小于___m,不足规定距离时,不得进行调车作业。J297
A. 1
B. 1.5
C. 2
【单选题】
双线自动闭塞区间正方向越出站界调车时,司机应得到___后,方可出站调车。J302
A. 出站调车通知书
B. 车站值班员口头准许
C. 调度命令
【单选题】
双线反方向出站调车时,应发给司机___。J302
A. 绿色许可证
B. 路票
C. 出站调车通知书
【单选题】
单线半自动闭塞区间出站调车时,须发给司机___。J302
A. 半自动闭塞发车进路通知书
B. 路票
C. 出站调车通知书
【单选题】
跟踪出站调车,只准许在单线区间及双线正方向线路上办理,并发给司机___。J303
A. 路票
B. 出站调车通知书
C. 跟踪调车通知书
【单选题】
跟踪出站调车,最远不得越出站界___m。J303
A. 200
B. 500
C. 800
【单选题】
调车作业中,在超过___‰坡度的线路上,不得无动力停留机车车辆。J305
A. 2
B. 4
C. 6
【单选题】
行车基本闭塞法采用___。J309
A. 自动闭塞、自动站间闭塞、半自动闭塞
B. 自动闭塞、半自动闭塞
C. 自动闭塞、半自动闭塞、电话闭塞
【单选题】
在半自动闭塞区间,超长列车头部越过出站信号机并压上出站方面轨道电路发车时,列车占用区间的行车凭证为___。J311/J321
A. 调度命令
B. 路票
C. 出站信号机显示的允许运行的信号及车站值班员的通知
【单选题】
在自动站间闭塞区段,超长列车头部越过出站信号机并压上出站方面轨道电路发车时,列车占用区间的行车凭证为___。J311/J321
A. 调度命令
B. 路票
C. 绿色许可证
【单选题】
自动闭塞区段,超长列车头部越过出站信号机时发出列车,列车进入闭塞分区的行车凭证为___。J315
A. 绿色许可证
B. 路票
C. 出站信号机显示的允许运行的信号及调度命令
【单选题】
自动闭塞区段,超长列车头部越过发车进路信号机发出列车时,行车凭证为___。J315
A. 调度命令
B. 绿色许可证
C. 路票
【单选题】
自动闭塞区段,出站信号机故障时发出列车,列车进入闭塞分区的行车凭证为___。J315
A. 绿色许可证
B. 调度命令
C. 路票
【单选题】
半自动闭塞区段,遇发车进路信号机故障或超长列车头部越过发车进路信号机发车时,列车越过发车进路信号机的行车凭证为___。J320
A. 半自动闭塞发车进路通知书
B. 绿色许可证
C. 路票
【单选题】
半自动闭塞区段,遇超长列车头部越过出站信号机而未压上出站方面的轨道电路发车时,行车凭证为___,并发给司机调度命令。J320
A. 半自动闭塞发车进路通知书
B. 出站信号机显示的允许运行的信号
C. 路票
【单选题】
使用电话闭塞法行车时,列车占用区间的行车凭证为___。J321
A. 绿色许可证
B. 半自动闭塞发车进路通知书
C. 路票
【单选题】
一切电话中断时,单线行车按书面联络法,双线行车按时间间隔法,列车进入区间的行车凭证均为___。J324
A. 路票
B. 绿色许可证
C. 红色许可证
【单选题】
一切电话中断时,在双线自动闭塞区间,如闭塞设备作用良好时,列车运行___行车。J324
A. 按路票
B. 按红色许可证
C. 仍按自动闭塞法
【单选题】
单线区间的车站,经以闭塞电话、列车调度电话或其他电话呼唤___ min无人应答时,由列车调度员发布调度命令,封锁相邻区间,按封锁区间办法向不应答站发出列车。J330
A. 每3分钟
B. 5分钟
C. 8分钟
【单选题】
列车在出发前按规定对列车自动制动机进行试验,在制动保压状态下列车制动主管的压力___内漏泄不得超过20 kPa,确认列尾装置作用良好。J335
A. 每分钟
B. 1分钟
C. 2分钟
【单选题】
列车在出发前按规定对列车自动制动机进行试验,在制动保压状态下列车制动主管的压力1min内漏泄不得超过___,确认列尾装置作用良好。J335
A. 10kPa
B. 20kPa
C. 100kPa
推荐试题
【单选题】
You have just deployed SNMPv3 in your environment, Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request?___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port?___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch?___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature, what is the effect on the parent signature and the family of subsignatures?___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected, the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks?___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
2.刀开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
3.行程开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
4.交流接触器的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
A. 频繁地
B. 偶尔
C. 手动
D. 不需
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速