【单选题】
___是风险管控的基础。
A. 风险分析
B. 风险评价
C. 排查风险点
D. 风险分级
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
企业在选择风险控制措施时应考虑:___。
A. 可行性、安全性、可靠性
B. 必要性、实用性、安全性
C. 安全性、必要性、可靠性
D. 经济性、安全性、实用性
【单选题】
各企业的风险评价准则具体内容应___。
A. 应统一
B. 同行业应统一
C. 由各部门自己确定,无需统一
D. 与企业实际情况及相关法律法规要求有关
【单选题】
___承担建立和实施安全生产风险管控和隐患排查治理的主体责任。
A. 企业
B. 中介机构
C. 安监部门
D. 主要负责人
【单选题】
企业应建立以___为组长的安全生产风险分级管控体系建设领导小组。
A. 主要负责人
B. 分管安全负责人
C. 安全机构负责人
【单选题】
风险信息包括危险源名称、类型、存在位置、当前状态、伴随风险大小、等级、所需管控措施和___等一系列信息的综合。
A. 基层单位、责任人
B. 所在单位、责任人
C. 责任单位、责任人
D. 各级单位、责任人
【单选题】
风险分级管控程序四个阶段包括危险源识别、危险源分级、风险控制和___。
A. 效果验证
B. 效果验证与更新
C. 效果评价
D. 效果验证与评价
【单选题】
风险分级是通过采用科学、合理方法对危险源所伴随的风险进行定性或定量评价,根据___划分等级。
A. 风险评价
B. 评价结论
C. 评价结果
D. 风险评估
【单选题】
风险分级管控的基本原则:___。
A. 风险越大,管控级别越高;上级负责管控的风险,下级必须负责管控,并逐级落实具体措施。
B. 风险越小,管控级别越高;上级负责管控的风险,下级必须负责管控,并逐级落实具体措施。
C. 风险越大,管控级别越低;上级负责管控的风险,下级必须负责管控,并逐级落实具体措施。
D. 风险越大,管控级别越高;下级负责管控的风险,上级必须负责管控,并逐级落实具体措施。
【单选题】
企业应在各岗位悬挂安全风险告知牌板,标明风险点名称及等级、危险源名称及等级、事故类别或后果、管控措施、管控层级、责任单位、责任人及___等内容。并分别用红橙黄蓝对风险等级进行标识。
A. 应急预案
B. 应急电话
C. 联系方式
【单选题】
企业应对___在醒目位置设置安全风险告知栏。
A. 一级风险点
B. 二级风险点
C. 三级风险点
【单选题】
对确定为重大风险的,在制定风险控制措施时,应尽可能地采取___的风险控制方法,并多级控制。
A. 较高级
B. 相匹配
C. 同级别
【单选题】
安全生产风险分级管控体系培训教育制度应明确岗位员工熟知___的学习义务。
A. 本岗位风险点及危险源
B. 本岗位危险源及相应管控措施
C. 本岗位危险源及相应管控级别
【单选题】
安全生产风险分级管控体系建设部署实施阶段包括宣传发动、法律法规学习、___、落实分工四个步骤。
A. 考试
B. 培训
C. 教育
【单选题】
危险源分级,遵循___的原则,对每一个危险源进行分级。
A. 定性和定量相结合
B. 定量计算
C. 定性分析
【单选题】
风险分级管控体系建设落实分工阶段,企业要根据各职能部门、班组、岗位的职责,按照本企业的安全生产风险分级管控体系建设实施方案,全面部署排查风险点、辨识危险源、制定管控措施、___的任务。
A. 制定风险管控责任制
B. 编制风险管控清单
C. 编制风险点管控计划
【单选题】
风险分级管控体系建设的培训内容应包括各层级人员体系建设职责、体系建设实施方案、运行制度、相关概念、___等。
A. 风险点排查方法
B. 危险源排查方法
C. 风险排查辨识方法
【单选题】
安全生产风险分级管控体系建设专业组负责本专业风险点划分、___、风险分级及管控措施编制。
A. 危险源分级
B. 危险源排查
C. 危险源辨识
【单选题】
企业生产安全事故隐患排查治理体系运行包括___等4个步骤。
A. 隐患辨识、隐患汇总、隐患治理、治理验收
B. 隐患排查、隐患汇总、隐患治理、治理验收
C. 隐患排查、隐患分级、隐患治理、治理验收
【单选题】
综合性隐患排查应由公司级至少___组织一次;车间结合岗位责任制排查,至少( C )组织一次。
A. 每月、每周
B. 每月、每日
C. 每季度、每月
D. 每季度、每周
【单选题】
风险分级管控体系建设制度包括___。
A. 风险分级管控制度、培训教育制度、运行管理考核制度、持续改进管理制度
B. 体系建设实施方案、风险分级管控制度、培训教育制度、运行管理考核制度、持续改进管理制度
C. 体系建设实施方案、风险分级管控制度、培训教育制度、运行管理考核制度
【单选题】
安全生产风险分级管控体系建设工作组职责:一是负责本工作组范围内风险点划分、危险源辨识、风险分级、管控措施编制;二是落实风险分级管控体系建设具体工作,确保能够将所属范围的风险点全覆盖辨识,及时向风险分级管控体系建设领导小组汇报工作开展情况;三是___。
A. 制订所有各岗位及作业场所的风险告知排查标准,并组织员工培训、贯彻落实
B. 制订分管范围内各岗位及作业场所的风险告知排查标准,并组织员工培训、贯彻落实
C. 制订分管范围内各岗位及作业场所的风险告知排查表,并组织员工培训、贯彻落实
【单选题】
以下说法错误的是___。
A. 通过隐患排查治理体系的建设,使企业风险控制措施全面持续有效。
B. 通过隐患排查治理体系的建设,企业风险管控能力得到加强和提升。
C. 通过隐患排查治理体系的建设,职业健康管理水平得到提升。
D. 通过隐患排查治理体系的建设,企业实现零风险、零事故。
【单选题】
安全风险等级判定准则及控制措施:需要消减的风险,采取紧急措施降低风险,建立运行控制程序,定期检查、测量及评估风险等级为___。
A. 重要风险
B. 关键风险
C. 中度风险
D. 低度风险
【单选题】
安全风险等级判定准则及控制措施: 轻微风险可接受或可容许风险,无需采用控制措施实施期限为需保存记录风险级别为___。
A. 3级
B. 2级
C. 4级
D. 5级
【单选题】
风险分级采用LEC法,中度风险色为___。
A. 红
B. 橙
C. 黄
D. 蓝
【单选题】
1级风险(红色风险):不可容许的,巨大风险,极其危险,___。
A. 无需立即整改,可以继续作业。
B. 必须立即整改,可以继续作业。
C. 制定整改计划后,可以继续作业。
D. 必须立即整改,不能继续作业。
【单选题】
三、四级风险点可由___级监管,班组、车间管控;四级可由班组或岗位管控或因风险较小可直接忽略。
A. 公司
B. 班组
C. 车间
D. 岗位
【单选题】
企业应根据排查组织级别,结合风险点及危险源特性,确定符合企业实际的隐患排查___。
A. 责任人
B. 周期
C. 内容
【单选题】
车间、班组的隐患排查内容,可根据所管辖区域隐患排查的数量、风险等级、分布等因素,进行重点关注,侧重于___,并应确保区域内所有风险点及危险源均能等到监控。
A. 风险较低的风险点隐患排查
B. 风险偏高的风险点隐患排查
C. 风险较高的风险点隐患排查
D. 风险偏低的风险点隐患排查
【单选题】
排查风险点:排查伴随风险的部位、___、设备、设施或区域。
A. 方位
B. 地点
C. 场所
D. 位置
【单选题】
安全风险等级判定准则及控制措施:中度风险应采取行动/控制措施___。
A. 需要特别控制的风险,可考虑建立目标、建立操作规程,加强培训及沟通。
B. 需要立即停止作业,在采取措施降低危害前,不能继续作业,对改进措施进行评估。
C. 需要消减的风险,采取紧急措施降低风险,建立运行控制程序,定期检查、测量及评估。
D. 可接受或可容许风险,无需采用控制措施。
【单选题】
工作危害分析法能够全面地分析出___所有可能的风险,并针对可能风险采取相应的控制措施。
A. 作业活动
B. 设备设施C.安全设施 D.工艺操作
【单选题】
采用安全检查表法(SCL法)进行危险源辨识,一般多是针对___。
A. 作业活动
B. 设备设施
C. 环境因素
D. 管理因素
【单选题】
当通过作业条件危险性评价法得出企业风险的危险性分值大于___时,属于显著危险,需要整改。
A. 70
B. 160
C. 320
D. 50
【单选题】
工贸企业应按照风险点划分原则,在本单位生产活动区域内对生产经营全过程进行风险点排查,确定包括风险点名称、类型、区域位置、可能发生的事故类型及后果等内容的基本信息,建立___。
A. 风险统计表
B. 作业活动清单
C. 危险源统计表
D. 设备设施清单
【单选题】
以下哪些风险分析方法不属于工贸企业宜选用的分析方法___。
A. 风险矩阵分析法(LS)
B. 作业条件危险性分析法(LEC)
C. 风险程度分析法(MES)
D. 可操作性分析法(HAZOP)
【单选题】
在风险程度分析法(MES)中,“每天工作时间内暴露”应赋予的分值是___。
A. 1
B. 3
C. 6
D. 10
【单选题】
风险管控措施中,以下哪些不属于工程控制措施___。
A. 消除或减弱危害
B. 隔离
C. 移开或改变方向
D. 减少暴露时间
【单选题】
企业应根据自身组织机构特点,结合风险分级管控体系管控层级的划分,确定符合本企业实际的隐患排查___,按照对应的管控层级,对所有风险管控措施落实情况进行排查。
A. 责任人
B. 责任单位
C. 主体
【单选题】
安全生产风险分级管控体系培训教育制度应明确各基层单位落实___的职责。
A. 培训计划、组织职工学习风险分级管控相关内容
B. 培训计划、组织职工排查风险内容
C. 培训计划、组织职工辨识风险内容
推荐试题
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
【单选题】
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?___
A. Perform a final synchronization task.
B. Remove the server from the network.
C. Uninstall production applications.
D. Remove the server from the Active Directory domain.
【单选题】
Restoration of the vCenter Server Appliance is accomplished using which interface?___
A. vSphere Web Client
B. vSphere Client
C. vCenter Server Appliance Management Interface
D. vCenter Server Appliance GUI Installer
【单选题】
When attempting to migrate a virtual machine to another host in the same cluster, the error message, “Select a valid compute resource” returns. What could cause this error?___
A. Both hosts run different versions of ESXi.
B. Both hosts are not sharing the same datastore.
C. VMware Tools is not installed.
D. Virtual machine has an ISO attached.
【单选题】
When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?___
A. Immediately after the retention period has expired.
B. After the expired backup image is restored.
C. During the next backup window following expiry.
D. During the next maintenance window following expiry.
【单选题】
Group A has permission to download files in Content Library. Group B does not have permission to download files in Content Library. If a user is a member of both groups, what will be the result?___
A. The user cannot download file from Content Library.
B. The user can download file from Content Library.
C. The user cannot access Content Library.
D. The user can access Content Library.
【单选题】
An administrator is trying to set up Host Partial Failure Response, but the Automated option is grayed out. What can the administrator change to enable the Automated option?___
A. Change the vSphere DRS Automation level to Partially Automated.
B. Change the vSphere DRS Automation level to Fully Automated.
C. Enable vSphere HA Host Monitoring.
D. Change the vSphere DPM Automation level to Automatic.
【单选题】
When you attempt to open a virtual machine console from the vSphere Web Client, the console does not connect. The following error message appears:<HTTP ERROR 404> <Problem accessin/.Reason: Not Found>. Why did not connect?___
A. Port 443 is in use.
B. Port 9443 is in use.
C. Port 8443 is in use.
D. Port 22443 is in use.
【单选题】
What new feature was introduced to the Content Library in vSphere 6.5?___
A. Mount an ISO directly from the Content Library.
B. Deploy a virtual machine from an OVF Package in a Content Library.
C. Upload a File from a URL to a Library Item.
D. Upload a File from a Local System to a Library Item.
【单选题】
How can an administrator exclude Encryption rights from a support engineer?___
A. Clone the role Virtual machine power user, remove Cryptographic operations privileges.
B. Clone the role Administrator and assign to the support engineer.
C. Clone the role Virtual machine power user and assign to the support engineer.
D. Clone the role No cryptography administrator and select privileges only for the support engineer.
【单选题】
The administrator must back up a vCenter HA deployment. Which component must be backed up?___
A. Passive node
B. Witness node
C. External database
D. Active node
【单选题】
What is the supported protocol to perform remote L3 traffic monitoring in vSphere 6.5?___
A. VXLAN
B. ERSPAN
C. RSPAN
D. SPAN
【单选题】
What are the minimum hardware requirements for a Windows vCenter Server with embedded PSC that manages a “Small” environment?___
A. 2vCPUs, 16 GB RAM
B. 4 vCPUs, 16 GB RAM
C. 2 vCPUs, 10 GB RAM
D. 4 vCPUs, 10 GB RAM
【单选题】
Which port is used for communication between ESXi and vSphere Data protection?___
A. 80
B. 443
C. 902
D. 22
【单选题】
What can prevent Storage DRS from functioning on a datastore?___
A. The datastore is configured for Virtual Machine Swapfile location.
B. The datastore is shared across multiple datacenters.
C. The datastore is connected to a host that is running Storage I/O Control.
D. Storage DRS advanced option IgnoreAffinityRulesForMaintenance is set to 1.
【单选题】
When troubleshooting VMware vCenter Server issues, when logging level provides maximum detail?___
A. Verbose
B. Trivia
C. Info
D. Error
【单选题】
What new feature is introduced in NFS 4.1 on ESXi 6.5?___
A. IPv6
B. KRB5i
C. AUTH_SYS
D. Storage DRS
【单选题】
What configuration option would ensure that a virtual NUMA topology is defined on VMs having more than eight virtual CPUs?___
A. cupid.coresPerSocket
B. numa.vcpu.followcorespersocket
C. numa.vcpu.maxPerVirtualNode
D. numa.vcpu.min
【单选题】
What is the minimum disk space required to deploy vSphere Data Protection (VDP) with 8 TB configuration?___
A. 4 TB
B. 16 TB
C. 8 TB
D. 12 TB
【单选题】
What advanced option for vSphere HA defines a maximum number of reset attempts by VMCP for a virtual machine?___
A. das.maxterminates
B. das.isolationshutdowntimeout
C. das.maxresets
D. fdm.isolationpolicydelaysec