【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
【单选题】
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?___
A. Perform a final synchronization task.
B. Remove the server from the network.
C. Uninstall production applications.
D. Remove the server from the Active Directory domain.
【单选题】
Restoration of the vCenter Server Appliance is accomplished using which interface?___
A. vSphere Web Client
B. vSphere Client
C. vCenter Server Appliance Management Interface
D. vCenter Server Appliance GUI Installer
【单选题】
When attempting to migrate a virtual machine to another host in the same cluster, the error message, “Select a valid compute resource” returns. What could cause this error?___
A. Both hosts run different versions of ESXi.
B. Both hosts are not sharing the same datastore.
C. VMware Tools is not installed.
D. Virtual machine has an ISO attached.
【单选题】
When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?___
A. Immediately after the retention period has expired.
B. After the expired backup image is restored.
C. During the next backup window following expiry.
D. During the next maintenance window following expiry.
【单选题】
Group A has permission to download files in Content Library. Group B does not have permission to download files in Content Library. If a user is a member of both groups, what will be the result?___
A. The user cannot download file from Content Library.
B. The user can download file from Content Library.
C. The user cannot access Content Library.
D. The user can access Content Library.
【单选题】
An administrator is trying to set up Host Partial Failure Response, but the Automated option is grayed out. What can the administrator change to enable the Automated option?___
A. Change the vSphere DRS Automation level to Partially Automated.
B. Change the vSphere DRS Automation level to Fully Automated.
C. Enable vSphere HA Host Monitoring.
D. Change the vSphere DPM Automation level to Automatic.
【单选题】
When you attempt to open a virtual machine console from the vSphere Web Client, the console does not connect. The following error message appears:<HTTP ERROR 404> <Problem accessin/.Reason: Not Found>. Why did not connect?___
A. Port 443 is in use.
B. Port 9443 is in use.
C. Port 8443 is in use.
D. Port 22443 is in use.
【单选题】
What new feature was introduced to the Content Library in vSphere 6.5?___
A. Mount an ISO directly from the Content Library.
B. Deploy a virtual machine from an OVF Package in a Content Library.
C. Upload a File from a URL to a Library Item.
D. Upload a File from a Local System to a Library Item.
【单选题】
How can an administrator exclude Encryption rights from a support engineer?___
A. Clone the role Virtual machine power user, remove Cryptographic operations privileges.
B. Clone the role Administrator and assign to the support engineer.
C. Clone the role Virtual machine power user and assign to the support engineer.
D. Clone the role No cryptography administrator and select privileges only for the support engineer.
【单选题】
The administrator must back up a vCenter HA deployment. Which component must be backed up?___
A. Passive node
B. Witness node
C. External database
D. Active node
【单选题】
What is the supported protocol to perform remote L3 traffic monitoring in vSphere 6.5?___
A. VXLAN
B. ERSPAN
C. RSPAN
D. SPAN
【单选题】
What are the minimum hardware requirements for a Windows vCenter Server with embedded PSC that manages a “Small” environment?___
A. 2vCPUs, 16 GB RAM
B. 4 vCPUs, 16 GB RAM
C. 2 vCPUs, 10 GB RAM
D. 4 vCPUs, 10 GB RAM
【单选题】
Which port is used for communication between ESXi and vSphere Data protection?___
A. 80
B. 443
C. 902
D. 22
【单选题】
What can prevent Storage DRS from functioning on a datastore?___
A. The datastore is configured for Virtual Machine Swapfile location.
B. The datastore is shared across multiple datacenters.
C. The datastore is connected to a host that is running Storage I/O Control.
D. Storage DRS advanced option IgnoreAffinityRulesForMaintenance is set to 1.
【单选题】
When troubleshooting VMware vCenter Server issues, when logging level provides maximum detail?___
A. Verbose
B. Trivia
C. Info
D. Error
【单选题】
What new feature is introduced in NFS 4.1 on ESXi 6.5?___
A. IPv6
B. KRB5i
C. AUTH_SYS
D. Storage DRS
【单选题】
What configuration option would ensure that a virtual NUMA topology is defined on VMs having more than eight virtual CPUs?___
A. cupid.coresPerSocket
B. numa.vcpu.followcorespersocket
C. numa.vcpu.maxPerVirtualNode
D. numa.vcpu.min
【单选题】
What is the minimum disk space required to deploy vSphere Data Protection (VDP) with 8 TB configuration?___
A. 4 TB
B. 16 TB
C. 8 TB
D. 12 TB
【单选题】
What advanced option for vSphere HA defines a maximum number of reset attempts by VMCP for a virtual machine?___
A. das.maxterminates
B. das.isolationshutdowntimeout
C. das.maxresets
D. fdm.isolationpolicydelaysec
【单选题】
What vSphere technology enables the administrator to ensure consistent configuration at scale?___
A. PowerCLI
B. Host Profiles
C. esxcli
D. vSphere Web Client
【单选题】
Which port is used for vSphere HA agent-to-agent communication?___
A. 443
B. 8182
C. 22
D. 902
【单选题】
Which log file would assist in identifying an issue that occurred during the database export phase of a vCenter Server upgrade process?___
A. vcdb_import.out
B. export.json
C. export-upgrade-runner.log
D. vcdb_export.out
推荐试题
【判断题】
不允许在中性线上装熔断器或任何开关。
A. 对
B. 错
【判断题】
保护接地用于中性点不接地的供电运行方式。
A. 对
B. 错
【判断题】
保护接地用于中性点直接接地的供电运行方式。
A. 对
B. 错
【判断题】
380V/220V三相四线制低压配电系统,都采用了保护接地的运行方式。
A. 对
B. 错
【判断题】
在中性点接地系统中,带有保护接地的电气设备,当发生相线碰壳故障时,若人体接触设备外壳,仍会发生触电事故。
A. 对
B. 错
【判断题】
把电气设备的金属外壳与大地可靠地连接起来,以保证人身安全的保护方式,称为工作接地。
A. 对
B. 错
【判断题】
在1000伏以下中性点接地的三相四线制系统中,一切用电设备金属外壳都应装保护接零。
A. 对
B. 错
【判断题】
保护接零适用于中性点直接接地的运行方式。
A. 对
B. 错
【判断题】
在同一个车间内的机械设备,为了安全和接线方便,有的采用了保护接零,有的采用了保护接地。
A. 对
B. 错
【判断题】
重复接地就是沿零线把一点或多点再次接地.
A. 对
B. 错
【判断题】
由于安装了漏电保护器,在金属容器内工作就不必采用安全电压。
A. 对
B. 错
【判断题】
漏电保护器对两相触电不能进行保护,对相间短路也起不到保护作用。
A. 对
B. 错
【判断题】
电击是由于电流通过人体时造成的内部器官在生理上的反应和病变。
A. 对
B. 错
【判断题】
常用的低压保护电器主要是熔断器、自动空气开关和热继电器等。
A. 对
B. 错
【判断题】
装有低压断路器和刀开关的电路停电检修,断开断路器就可工作
A. 对
B. 错
【判断题】
自动空气开关具有短路保护功能。
A. 对
B. 错
【判断题】
熔断器的主要作用是对负载实施过载保护。
A. 对
B. 错
【判断题】
熔断器的熔丝选的小一点可以作为电动机的过载保护。
A. 对
B. 错
【判断题】
熔断器的额定电流即为熔体的额定电流。
A. 对
B. 错
【判断题】
交流接触器铁心上的短路环的作用是减少噪音和震动。
A. 对
B. 错
【判断题】
只要将热继电器热元件串接在主电路中,就能对电动机起到过载保护作用。
A. 对
B. 错
【判断题】
热继电器的主要作用是对负载实施短路保护。
A. 对
B. 错
【判断题】
热继电器在电路中的接线原则是热元件串联在主电路中,常开触头串联在控制电路中。
A. 对
B. 错
【判断题】
热继电器的整定电流即额定电流应为电动机额定电流的0.95~1.05倍。
A. 对
B. 错
【判断题】
晶体管、接近开关等属于无触点开关电器。
A. 对
B. 错
【判断题】
晶体管、接近开关等属于有触点开关电器。
A. 对
B. 错
【判断题】
光电开关属于无触点开关电器。
A. 对
B. 错
【判断题】
三相交流笼型异步电动机是一种非常重要的驱动元件。
A. 对
B. 错
【判断题】
三相交流笼型异步电动机是一种非常重要的控制元件。
A. 对
B. 错
【判断题】
电动机是一种将电能转变为机械能的电气设备。
A. 对
B. 错
【判断题】
三相异步电动机定子极数越多,则转速越高。
A. 对
B. 错
【判断题】
三相交流电动机调整接线方法(星形、三角形)即可改变电动机的旋转方向。
A. 对
B. 错
【判断题】
三相交流笼型异步电动机的额定电压是指加在定子绕组上的相电压。
A. 对
B. 错
【判断题】
一台三相交流笼型异步电动机型号Y-200L2-6 ,指明电动机的极对数为3。
A. 对
B. 错
【判断题】
一台三相交流笼型异步电动机型号Y-200L2-6 ,指明电动机的极对数为6。
A. 对
B. 错
【判断题】
三相交流笼型异步电动机的额定功率是指额定运行时电机输出的机械功率。
A. 对
B. 错
【判断题】
三相交流笼型异步电动机的额定功率是指额定运行时电源输入的电功率。
A. 对
B. 错
【判断题】
带有额定负载转矩的三相异步电动机,若使电源电压低于额定电压,则其电流就会低于额定电流。
A. 对
B. 错
【判断题】
点动控制,就是点一下按钮电动机运行,松开按钮电动机即停止运行。
A. 对
B. 错
【判断题】
点动控制,就是点一下按钮就可以启动并运行的控制方式。
A. 对
B. 错