【多选题】
在EPON系统中，解决ONU的注册冲突的方案有：（ ）___
A. 随机延迟时间法
B. 随机同步时间法
C. 随机周期发送法
D. 随机跳过开窗法
E.
F.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
AD
解析
暂无解析
相关试题
【多选题】
OLT支持哪些下行业务的调度机制（ ）___
A. 非剥夺式优先级调度
B. 严格优先级队列调度（SP）
C. 加权循环队列调度（WRR）
D. SP+WRR调度
E.
F.
【多选题】
ONU主要完成的功能有（ ）___
A. 选择接收OLT发送的广播数据
B. 响应OLT发出的测距及功率控制命令，并作相应的调整
C. 对用户的以太网数据进行缓存，并在OLT分配的发送窗口中向上行方向发送
D. 其它相关的以太网功能
E.
F.
【多选题】
光链路测量和诊断功能，OLT应支持对自身光模块哪些指标的监测（ ）___
A. 工作温度（operating temperature）
B. 供电电压（supply voltage）
C. 偏置电流（bias current）
D. 发送光功率（transmitted power）
E.
F.
【多选题】
GPON与EPON相比各自的特点是（ ）___
A. GPON下行速率高于EPON
B. EPON的带宽利用率更高
C. GPON支持QOS处理的业务种类更丰富
D. GPON有专用的通道进行终端的管理
E.
F.
【多选题】
下面GPON和EPON的技术对比描述中错误的是（ ）___
A. GPON和EPON都可以通过DBA技术控制上下行的带宽
B. GPON和EPON技术都可以应用在FTTH场景下
C. GPON支持的下行速率比EPON要大
D. GPON和EPON技术都可以利用OMCI和OAM通道进行ONT的管理配置
E.
F.
【多选题】
下列哪个上下行速率在GPON的G.984.1标准中规定了（ ）。___
A. 上行1Gbit/s，下行1.25 Gbit/s
B. 上行0.6Gbit/s，下行1.25 Gbit/s
C. 上行1.25 Gbit/s，下行1.25 Gbit/s
D. 上行1.25 Gbit/s，下行2.5 Gbit/s
E.
F.
【多选题】
关于下一代PON技术，下列那个描述正确( )___
A. 当前，10 EPON标准已经获得了IEEE通过
B. 当前，10 GPON标准已经获得ITU-T和IEEE通过
C. 下一代彩色GPON本质上是利用稀疏波分复用（CWDM）技术，上下行可有多个波长
D. 10G PON技术上不可能兼容当前的PON技术
E.
F.
【多选题】
以下关于ONU 注册的说法哪些是正确的（）___
A. ONU注册采用的是SIP协议
B. 同块PON板上的ONU注册可以分别采用MAC地址和SN注册
C. 采用MAC地址注册的ONU，应该保证MAC地址不冲突
D. 采用SN注册的ONU，不同的ONU的MAC地址可以相同
E.
F.
【多选题】
某PON口下的ONT不能正常注册，可能的原因有哪些？（ ）___
A. ONT故障
B. 光路损耗过大
C. 光路距离与OLT配置的最大距离不匹配
D. 认证信息冲突
E. 流氓ONT
F.
【多选题】
ONU不能注册可能的原因包括（ ）。___
A. ONU光接收功率异常
B. ONU电源异常
C. ONU自身故障或其它ONU影响
D. 找错用户线导致（光分箱内用户线）
E.
F.
【多选题】
ONU注册异常，可能的原因有（）___
A. ONU至分光器光纤异常
B. 分光器端口异常
C. 分光器到OLT主干光纤异常
D. 上联OLT PON口与实际不符
E. ONU的LOID输入有误
F.
【多选题】
ONU的LOS灯异常，可能的原因有（）___
A. ONU至分光器光纤异常
B. 分光器端口异常
C. 分光器到OLT主干光纤异常
D. 上联OLT PON口与实际不符
E. ONU的LOID输入有误
F.
【多选题】
用户可以正常访问网络，但是网络连接时常中断，可能存在的故障原因是（）___
A. ONU掉线
B. ONU到用户之间的线路有问题
C. 数据链路有问题导致丢包
D. PON 口故障
E.
F.
【多选题】
假设有一个小区的ONU集体掉线，请判断可能是以下哪些原因引起的? ( )___
A. 小区ONU设备供电线路断电
B. OLT至ODN之间的光路中断
C. OLT的下联光口板运行故障
D. OLT的上联板的上联口连接中断或故障
E.
F.
【多选题】
在进行ONU光功率测试时，下面正确的说法是（）___
A. ONU是被动发光
B. 测试时，光功率计是串联在OLT和ONU之间
C. 保证光口清洁，连接可靠
D. 要注意光功率计测试波长的正确选择
E.
F.
【多选题】
引起光功率衰减的主要影响因素有（ ）___
A. 分光器的插入损耗
B. 光缆本身的损耗，与长度有关
C. 光缆熔接点损耗
D. 尾纤/跳纤通过适配器端口连接的插入损耗
E.
F.
【多选题】
ONU PON指示灯常亮，但POTS1 POTS2指示灯灭，电话无法拨打的原因()___
A. LOID注册失败
B. 电话机坏
C. ONU语音数据配置有误
D. 断纤
E.
F.
【多选题】
若ONU下的用户PPPOE出现691错误,可能的原因有（）___
A. 用户名/密码不对
B. ONU上vlan未配置
C. ONU上配置的vlan与用户绑定的vlan不一致
D. 该帐号已经在别的地方使用
E.
F.
【多选题】
ONU的数据配置地址是192.168.1.1，在电脑上配置ONU之前，需要做（）___
A. 用网线连接电脑和ONU的任意LAN端口
B. 配置电脑的IP地址和掩码为192.168.1.5/255.255.255.0
C. 打开网页输入：http://192.168.1.5
D. 当ONU要求管理员账号时，输入正确的用户名和密码
E.
F.
【多选题】
如果一个ONU用户上网,本来应该10Mb/s的速率,但是只能达到100-200kB/s的下载速度,可能的原因是（）___
A. 光路不稳定
B. ONU上下行速率未设置而使用了默认带宽
C. 下载服务器带宽问题
D. 用户PPPOE的帐号已经限速
E.
F.
推荐试题
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
