【单选题】
食品生产者应对其生产食品的______负责。___
A. 口感
B. 营养
C. 色泽
D. 安全
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
食品生产企业应当建立食品原料、食品添加剂、食品相关产品进货查验记录制度，并保存相关进货凭证。记录和凭证保存期限不得少于产品保质期满后______；没有明确保质期的，保存期限不得少于______。___
A. 3个月；1年
B. 3个月；2年
C. 6个月；1年
D. 6个月；2年
【单选题】
食品生产经营者超范围从事生产经营活动的，由海关依据情节轻重处______罚款。___
A. 1000元以下
B. 3000元以上20000元以下
C. 5000元以上100000元以下
D. 2000元以上30000元以下
【单选题】
第一质量控制期是指______。___
A. 航空配餐加工、配送、储存的时限
B. 航空配餐从加工到航班飞机预计起飞时间的时间限制
C. 航空配餐从成品冷库出库到旅客食用的时间限制
D. 航空配餐从成品冷库出库到预计起飞时间的时间限制
【单选题】
航空配餐中蛋白质或碳水化合物含量较高的食品，通常pH大于______且水分活度大于_____，易于微生物生长或产生毒素。___
A. 6；0.85
B. 5.6；0.85
C. 4.6；0.8
D. 4.6；0.85
【单选题】
航空配餐正确的工艺流程为______。___
A. 原料验收→储存→初加工→冷、热加工→装配→成品储存→配送
B. 原料验收→初加工→冷、热加工→分装→装配→成品储存→配送装机
C. 原料验收→储存→初加工→冷、热加工→分装→成品储存→装配→配送装机
D. 原料验收→储存→初加工→冷、热加工→分装→装配→成品储存→配送装机
【单选题】
根据《食品安全国家标准 航空食品卫生规范》（GB31641），采用热链工艺生产的食品，在加工、储存、运输和食用前需保持在________以上。___
A. 80℃
B. 70℃
C. 60℃
D. 50℃
【单选题】
第二质量控制期指的是______。___
A. 航空配餐从成品冷库出库到旅客食用的时间限制
B. 航空配餐从成品冷库出库到预计起飞时间的时间限制
C. 航空配餐从加工到预计起飞时间的时间限制
D. 航空配餐从加工到旅客食用的时间限制
【单选题】
航空配餐人员是指_____。___
A. 航空器机组人员
B. 航空器上专门提供食品服务的人员
C. 从事航空食品加工的人员
D. 从事航空配餐采购、生产、加工、运输、储藏及机上供餐服务的人员
【单选题】
下列关于航空配餐生产车间的表述，错误的是：___
A. 宜分开设置供独立使用的食品原辅材料入口、垃圾出口
B. 宜分开设置供独立使用的餐食装机出口、机上餐食及食具卸机入口
C. 宜分开设置供独立使用的人员出入口，设置人员出入专用通道
D. 机上垃圾出口和餐食及食具卸机入口可以是同一个口
【单选题】
航空配餐公司应设置专门的清洗、消毒车间，对飞机上卸下的非一次性食具进行清洗和消毒的程序应为______。___
A. 按食具回收→分检→清洗→消毒→储藏→再使用的程序
B. 按食具回收→清洗→分检→储藏→消毒→再使用的程序
C. 按食具回收→清洗→分检→消毒→储藏→再使用的程序
D. 按食具回收→清洗→消毒→分检→储藏→再使用的程序
【单选题】
烹煮食品时要达到安全的中心温度以上：禽类和肉糜、肉馅类中心温度和其他食品中心温度应分别达到______。___
A. 74℃以上和78℃以上
B. 70℃以上和74℃以上
C. 76℃以上和74℃以上
D. 74℃以上和70℃以上
【单选题】
已烹制的食品经过快速冷却后加以冷藏，烹制完成后______内，食品中心温度应由______降至_______以下。___
A. 6小时；65℃；10℃
B. 6小时；70℃；20℃
C. 4小时；70℃；10℃
D. 4小时；65℃；10℃
【单选题】
下列关于航空配餐生产配制和包装的表述，错误的是：___
A. 装配餐盒时，不宜将小包装的成品食品、纸巾餐具、带皮水果等与无包装的食品放在一起，除非各种食品均单独封装或覆以消毒的保鲜膜
B. 用于食品包装的薄膜、纸箱（盒）、包装纸、锡箔盒、塑料制品等材料应符合国家卫生标准有关规定
C. 餐食应当避开冷库中的风扇下方存放，防止冷凝水滴下造成污染
D. 配餐放入过渡冷库至出冷库装机之间的时间间隔不应超过48小时
【单选题】
下列关于机上配餐卫生管理的做法，错误是：___
A. 配餐自过渡冷库中取出时表面温度在5℃以下，到达机上时表面温度在10℃以下
B. 餐自过渡冷库中取出时表面温度在5℃以下，配餐出库时间距航班预计起飞时间在3h之内
C. 机上有冷藏设施者，迅速启动冷藏设施，保证配餐在10℃以下保存,可在机上保存12h
D. 已经装机的餐食温度在15℃以下，保存4h之内，不必更换
【单选题】
重要航班供应的食品成品应留样。留样食品应盛放于清洁的专用容器内，在冷藏条件下存放_____以上，每个品种留样量不少于_____，建立检验记录制度和生产过程安全管理记录制度。所有记录保持不得少于______。___
A. 24 h；100 g；2年
B. 24 h；200 g；1年
C. 48 h；100 g；1年
D. 48 h；100 g；2年
【单选题】
航空配餐生产企业在采购的成品和食品原料、食品添加剂及食品相关产品时验收首先需要验收的是________。___
A. 按供货批次查验供应商提供的产品合格证明文件
B. 查验货物温度
C. 到现场审查
D. 对生产企业的产品质量管理体系进行持续管理
【单选题】
加工生鲜肉、禽、鱼虾类及其制品，应采用可靠的热加工工艺对食品进行熟化杀菌处理,确保食品中心温度达到________限值并至少保持_________。___
A. 72度；10秒
B. 70度；15秒
C. 63度；10秒
D. 74度；15秒
【单选题】
依照《国境口岸病媒生物监测规定》，国境口岸区域病媒生物监测范围为国境口岸及周边______的环境，各海关可根据本口岸实际适当扩大监测范围。___
A. 200米
B. 400米
C. 800米
D. 1000米
推荐试题
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
