【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
【单选题】
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?___
A. Perform a final synchronization task.
B. Remove the server from the network.
C. Uninstall production applications.
D. Remove the server from the Active Directory domain.
【单选题】
Restoration of the vCenter Server Appliance is accomplished using which interface?___
A. vSphere Web Client
B. vSphere Client
C. vCenter Server Appliance Management Interface
D. vCenter Server Appliance GUI Installer
【单选题】
When attempting to migrate a virtual machine to another host in the same cluster, the error message, “Select a valid compute resource” returns. What could cause this error?___
A. Both hosts run different versions of ESXi.
B. Both hosts are not sharing the same datastore.
C. VMware Tools is not installed.
D. Virtual machine has an ISO attached.
【单选题】
When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?___
A. Immediately after the retention period has expired.
B. After the expired backup image is restored.
C. During the next backup window following expiry.
D. During the next maintenance window following expiry.
【单选题】
Group A has permission to download files in Content Library. Group B does not have permission to download files in Content Library. If a user is a member of both groups, what will be the result?___
A. The user cannot download file from Content Library.
B. The user can download file from Content Library.
C. The user cannot access Content Library.
D. The user can access Content Library.
【单选题】
An administrator is trying to set up Host Partial Failure Response, but the Automated option is grayed out. What can the administrator change to enable the Automated option?___
A. Change the vSphere DRS Automation level to Partially Automated.
B. Change the vSphere DRS Automation level to Fully Automated.
C. Enable vSphere HA Host Monitoring.
D. Change the vSphere DPM Automation level to Automatic.
【单选题】
When you attempt to open a virtual machine console from the vSphere Web Client, the console does not connect. The following error message appears:<HTTP ERROR 404> <Problem accessin/.Reason: Not Found>. Why did not connect?___
A. Port 443 is in use.
B. Port 9443 is in use.
C. Port 8443 is in use.
D. Port 22443 is in use.
推荐试题
【多选题】
溶剂再生塔底温高对装置能耗的影响主要是___。
A. 塔底加热蒸汽消耗量大
B. 富液泵电耗大
C. 贫液冷却负荷大
D. 贫液泵电耗大
【多选题】
贫液中H2S含量高的原因是___。
A. 再生塔顶部温度高
B. 再生塔压力高
C. 富液中CO2含量偏高
D. 重沸器壳程液位过高
【多选题】
降低克劳斯尾气中硫化氢含量的方法是___。
A. 减少酸性气波动
B. 提高反应炉炉膛温度
C. 提高配风比
D. 提高克劳斯反应器进口温度
【多选题】
克劳斯反应器床层温度的影响因素是___。
A. 反应器进口H2SSO2浓度变化
B. 催化剂活性
C. 反应器进口温度的变化
D. 系统压力的变化
【多选题】
溶剂发泡时的处理方法是___。
A. 添加适量的消泡剂
B. 加强溶剂过滤
C. 检查储罐氮封是否完好,防止空气漏入
D. 加水置换
【多选题】
酸性气原料突然中断的处理方法是___。
A. 改烧瓦斯
B. 时间长装置按紧急停工处理
C. 燃烧炉闷炉待料
D. 焚烧炉闷炉待料
【多选题】
脱硫剂富液与贫液主要区别有___。
A. 硫化氢浓度
B. 二氧化碳浓度
C. 烃浓度
D. 氮气浓度
【多选题】
尾气焚烧炉鼓风机停机时焚烧炉的工艺现象是___。
A. 进炉风量为零
B. 发生联锁自保
C. 炉膛压力升高
D. 炉膛熄火
【多选题】
硫磺排污时发现黑硫磺,其生成原因不正确的是___。
A. 原料带水
B. 燃烧炉瓦斯进炉阀门内漏
C. 原料带烃
D. 原料带胺
【多选题】
瓦斯带水的工艺现象___。
A. 炉膛火焰发红
B. 炉膛压力上升
C. 炉膛出口温度急剧下降
D. 如带水过多火焰熄灭
【多选题】
烟囱冒黑烟的原因是___。
A. 焚烧炉配风过小
B. 风机放空阀开度过大
C. 烟气量过大
D. 废热锅炉腐蚀
【多选题】
停仪表风的现象___。
A. 调节阀失灵
B. 操作参数变化较大
C. 调节阀开度为100%
D. 控制阀可以控制
【多选题】
烟道气温度高时的处理方法是___。
A. 烟道增加衬里
B. 开好克劳斯系统
C. 全开烟道进口蝶阀
D. 降低焚烧炉废热锅炉自发中压蒸汽压力
【多选题】
克劳斯反应器超温经常发生在___。
A. 开工时
B. 停工时
C. 配风比高时
D. 配风比低时
【多选题】
瓦斯带油,将会导致___。
A. 瓦斯减量而炉温下降
B. 瓦斯减量而炉温上升
C. 焚烧炉炉膛熄火
D. 阻火器失效
【多选题】
溶剂再生塔压力高的处理方法是___。
A. 检查是否克劳斯系统压力上升
B. 降低塔底蒸汽流量
C. 检查回流罐液面是否高
D. 提高回流量
【多选题】
溶剂再生塔压力高的危害是___。
A. 酸性气放火炬
B. 溶剂解吸效果变差
C. 溶剂老化
D. 溶剂浓度变低
【多选题】
停燃料气的处理方法是___。
A. 检查阻火器是否堵
B. 检查控制阀是否处于全关状态
C. 检查是否瓦斯分液罐是否满
D. 检查联锁是否完好
【多选题】
停高压除氧水对硫磺回收装置的影响是___。
A. 造成锅炉水位低
B. 损坏蒸汽过热器
C. 加工量降低
D. 对装置没有影响
【多选题】
在PID控制中,有___控制参数。
A. 比例度
B. 积分时间
C. 微分时间
D. 时间
【多选题】
酸性水脱气罐压力过低的原因___。
A. 脱气罐液面过低
B. 进料烃含量过小
C. 进料量小
D. 仪表故障
【多选题】
汽提塔塔顶压力低的原因是___。
A. 污水浓度高
B. 进料量小
C. 酸性气排出量大
D. 加热蒸汽量大
【多选题】
汽提塔底液面偏高的原因是___。
A. 加热蒸汽量大
B. 热进料量大
C. 净化水排出量小
D. 仪表失灵
【多选题】
汽提塔塔顶压力偏高的原因是___。
A. 加热蒸汽量大
B. 污水浓度高
C. 克劳斯系统压力高
D. 仪表失灵
【多选题】
汽提塔顶酸性气线堵的现象___。
A. 塔顶压力升高
B. 顶温下降
C. 酸性气流量降低
D. 塔顶压力下降
【多选题】
汽提塔顶酸性气线堵的的处理方法___。
A. 作紧急停工处理
B. 提高塔顶温
C. 用蒸汽吹扫堵塞管线
D. 加大塔顶回流
【多选题】
酸性水汽提装置瞬时停电或短时间停电的处理方法___。
A. 重沸器的蒸汽量调节阀关小
B. 关闭净化水出装置调节阀
C. 重新启动机泵
D. 检查原料水罐的液位情况
【多选题】
燃烧炉温度过高的原因有___。
A. 酸性气含烃类高
B. 酸性气中硫化氢浓度高
C. 配风偏大
D. 仪表失灵
【多选题】
使氧化铝型催化剂硫酸盐化,使其降低或丧失活性的主要毒害物质是___。
A. O2
B. SO3
C. NH3
D. H2S
【多选题】
锅炉用水水质不良对锅炉的危害有___。
A. 生锅炉结垢
B. 引起锅炉腐蚀
C. 影响蒸汽品质
D. 无影响
【多选题】
H2S/SO2在线分析仪发生故障,会产生___
A. H2S/SO2比值固定不变
B. 与采样分析的数据不一致
C. 尾气中二氧化硫含量上升
D. 副风不随 H2S/SO2比值的变化而变化
【多选题】
装置催化剂的物理失活主要有___
A. 积碳
B. 硫酸盐
C. 积硫
D. 热崩
【多选题】
用瓦斯升温过程中,燃烧炉或反应器温度偏高可以采取的措施正确的是___
A. 降低瓦斯量
B. 减少风量
C. 注氮气降温
D. 提高风量
【多选题】
硫磺装置酸气原料中主要杂质有___
A. 二氧化碳
B. 烃类
C. 氨盐
D. 水分
【多选题】
酸性气分液罐的作用___。
A. 脱油
B. 脱水
C. 脱烃
D. 缓冲
【多选题】
在酸气燃烧炉中发生的主要反应是___。
A. H2S+1/2O2=1/2S2+H2O
B. CH4+2O2=CO2+2H2O
C. 2H2S+3O2=2SO2+2H2O
D. COS+H2O=CO2+H2S
【多选题】
硫磺回收装置的污染源有___。
A. 废催化剂
B. 废气
C. 含硫污水
D. 噪音
【多选题】
锅炉煮炉在炉水中加入药剂,然后将炉水煮沸,使锅炉内金属表面的污垢和铁锈溶解疏松和脱落下来,以___。
A. 防止受热面腐蚀
B. 防止受热面过热
C. 保证炉水品质
D. 保证蒸汽的品质
【多选题】
常用煮炉用药剂有___。
A. 磷酸三钠
B. 硫酸钠
C. 氢氧化钠
D. 氯化钠
【多选题】
点炉升温前应满足以下___准备工作。
A. 瓦斯采样分析氧含量,确保瓦斯合格
B. 废热锅炉已进水至指定液位,并用蒸汽加热
C. 准备好升温曲线
D. 打火系统检查正常