【单选题】
可编程序控制器是一种专门在___环境下应用而设计的数字运算操作的电子装置。
A. 工业
B. 军事
C. 商业
D. 农业
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
可编程序控制器采用可以编制程序的存储器,用来在其内部存储执行逻辑运算、___和算术运算等操作指令。
A. 控制运算、计数
B. 统计运算、计时、计数
C. 数字运算、计时
D. 顺序控制、计时、计数
【单选题】
可编程序控制器不需要大量的___和电子元件,接线大大减少,维修简单,维修时间缩短,性能可靠。
A. 活动部件
B. 固定部件
C. 电器部件
D. 部分部件
【单选题】
可编程序控制器不需要大量的活动部件和___,接线大大减少,维修简单,维修时间缩短,性能可靠。
A. 微机部件
B. 电子元件
C. 电器部件
D. 部分部件
【单选题】
可编程序控制器的特点是___。
A. 不需要大量的活动部件和电子元件,接线大大减少,维修简单,维修时间缩短,性能可靠
B. 统计运算、计时、计数采用了一系列可靠性设计
C. 数字运算、计时编程简单,操作方便,维修容易,不易发生操作失误
D. 以上都是
【单选题】
可编程序控制器是一种工业控制计算机,有很强的自检功能。可通过其自检功能,诊断出许多___。
A. 自身故障
B. 外围设备的故障
C. 自身故障或外围设备的故障
D. 程序故障或自身故障
【单选题】
可编程序控制器是一种工业控制计算机,有很强的自检功能。可通过其___功能,诊断出许多自身故障或外围设备的故障。
A. 自检
B. 监控
C. 保护
D. 调节
【单选题】
可编程序控制器采用可以编制程序的存储器,用来在其内部存储执行逻辑运算、顺序控制、计时、计数和算术运算等___指令。
A. 控制
B. 基本
C. 操作
D. 特殊
【单选题】
可编程序控制器采用大规模集成电路构成的微处理器和___来组成逻辑部分。
A. 运算器
B. 控制器
C. 存储器
D. 累加器
【单选题】
可编程序控制器采用大规模集成电路构成的___和存储器来组成逻辑部分。
A. 运算器
B. 微处理器
C. 控制器
D. 累加器
【单选题】
可编程序控制器编程灵活性。编程语言有梯形图、布尔助记符、___、功能模块图和语句描述。
A. 安装图
B. 原理图
C. 功能表图
D. 逻辑图
【单选题】
可编程序控制器编程灵活性。编程语言有、布尔助记符、功能表图、___和语句描述。
A. 安装图
B. 逻辑图
C. 原理图
D. 功能模块图
【单选题】
可编程序控制器编程灵活性。编程语言有梯形图、布尔助记符、___、功能模块图和语句描述。
A. 安装图
B. 原理图
C. 功能表图
D. 逻辑图
【单选题】
___是可编程序控制器的编程基础。
A. 梯形图
B. 逻辑图
C. 位置图
D. 功能表图
【单选题】
___阶段根据读入的输入信号状态,解读用户程序逻辑,按用户逻辑得到正确的输出。
A. 输出采样
B. 输入采样
C. 程序执行
D. 输出刷新
【单选题】
___阶段读入输入信号,将按钮、开关触点、传感器等输入信号读入到存储器内,读入的信号一直保持到下一次该信号再次被读入时为止,即经过一个扫描周期。
A. 输出采样
B. 输入采样
C. 程序执行
D. 输出刷新
【单选题】
___阶段把逻辑解读的结果,通过输出部件输出给现场的受控元件。
A. 输出采样
B. 输入采样
C. 程序执行
D. 输出刷新
【单选题】
可编程序控制器自检结果首先反映在各单元面板上的___上。
A. 七段码指示灯
B. LED 指示灯
C. 信号灯
D. 指针
【单选题】
___不是运行指示灯不亮的原因。
A. 输入回路有故障
B. 单元内部有故障
C. 远程I/O站的电源未通
D. 程序错误
【单选题】
___不是输人全部不接通而且输人指示灯均不亮的原因。
A. 公共端子螺钉松动
B. 单元内部有故障
C. 远程I/O站的电源未通
D. 未加外部输入电源
【单选题】
正常时每个输出端口对应的指示灯应随该端口有输出或无输出而亮或熄。否则就是有故障。其原因可能是___。
A. 输出元件短路
B. 开路
C. 烧毁
D. 以上都是
【单选题】
正常时每个输出端口对应的指示灯应随该端口___。
A. 无输出或无输出而亮或熄
B. 有输出或无输出而亮或熄
C. 有无输入而亮或熄
D. 有无输入均亮
【单选题】
总体检查时检查运行指示灯是否亮。如果不亮,则检查___。
A. 电源电路
B. 有何异常情况发生
C. 电源指示灯是否正常
D. 输入输出是否正常
【单选题】
运行指示灯是当可编程序控制器某单元运行、___正常时,该单元上的运行指示灯一直亮。
A. 自检
B. 调节
C. 保护
D. 监控
【单选题】
F系列可编程序控制器定时器用___表示。
A. X
B. Y
C. T
D. C
【单选题】
F系列可编程序控制器中的OR指令用于___。
A. 常闭触点的串联
B. 常闭触点的并联
C. 常开触点的串联
D. 常开触点的并联
【判断题】
测量用电流互感器至电能表的二次导线截面积应按电流互感器额定二次负荷计算确定,至少应不小于6 mm2。
A. 对
B. 错
【判断题】
10kV电流互感器二次绕组K2端要可靠接地。
A. 对
B. 错
【判断题】
10kV高供低计用户电流互感器变比为600/5,则倍率为12000。
A. 对
B. 错
【判断题】
3×5A,3×100V三相三线有功表,经200/5A电流互感器和10000/100V的电压互感器计量,则其实用倍率为4000。
A. 对
B. 错
【判断题】
电压互感器超过2倍额定电压下过电压运行,从而引起一、二次绕组过电流而致烧坏。
A. 对
B. 错
【判断题】
变换交流电流的互感器称为电压互感器。
A. 对
B. 错
【判断题】
测量用电压互感器至电能表的二次导线二次导线截面积应按允许的电压降计算确定,至少应不小于2.5 mm2。
A. 对
B. 错
【判断题】
单相电压、电流互感器有加、减极性。
A. 对
B. 错
【判断题】
当电压互感器二次负荷的导纳值减小时,其误差的变化是比值差的变化是比值差往负,相差往正。
A. 对
B. 错
【判断题】
当电压互感器一、二次绕组匝数增大时,其误差的变化是减小。
A. 对
B. 错
【判断题】
电流互感器产生误差的主要原因是产生互感器铁芯中磁通的激磁电流。
A. 对
B. 错
【判断题】
电流互感器的二次负荷随着二次电流的增加而增加。
A. 对
B. 错
【判断题】
电流互感器的负荷与其所接一次线路上的负荷大小有关。
A. 对
B. 错
【判断题】
电流互感器二次绕组可以开路,不可以短路。
A. 对
B. 错
【判断题】
电流互感器将L1和K1连接,通过K1接到电能表接线盒电流、电压共用端钮上时,互感器二次侧不能再接地。
A. 对
B. 错
推荐试题
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.