【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
BD
解析
暂无解析
相关试题
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
【多选题】
Which two storage configurations on the source server are unsupported with VMware Converter? (Choose two.)___
A. Linux LVM
B. software RAID
C. GPT/MBR hybrid disks
D. Windows basic volumes
E. Windows dynamic volumes
【多选题】
Which two statements about vCenter HA are correct? (Choose two.)___
A. ESXi 5.5 or later is required.
B. vCenter HA network latency between nodes must be less than 50 ms.
C. NFS datastore is supported.
D. It must be deployed on a 3
E. SXi host cluster with DRS enabled.
【多选题】
An attempt to delete NFS datastore from a ESXi host returns the error: Sysinfo error on operation returned the following status:< Busy> Which two statements could explain this failure? (Choose two.)___
A. NFS datastore is a part of Storage DRS Cluster.
B. NFS.VolumeRemountFrequency value is set to 30.
C. Storage I/O Control is enabled on NFS datastore.
D. NFS datastore has running or registered virtual machines.
【多选题】
An administrator finds that the Microsoft Exchange virtual machines are exhibiting network latency. What two in-guest changes can help decrease latency? (Choose two.)___
A. LRO
B. TSO
C. SR-IOV
D. PVRDMA
【多选题】
Which two types of iSCSI adapters require VMkernel networking configuration? (Choose two.)___
A. dependent hardware
B. in-guest
C. software
D. independent hardware
【多选题】
Which two statements are true for NFS v4.1 firewall behavior? (Choose two.)___
A. It closes port 2049.
B. It sets allowed. All flag to TRUE.
C. It sets allowed. All flag to FALSE.
D. It opens port 2049.
【多选题】
A vSphere Administrator attempts to enable Fault Tolerance for a virtual machine but receives the following error: Secondary VM could not be powered on as there are no compatible hosts that can accommodate it. What two options could cause this error? (Choose two.)___
A. The other ESXi host(s) are in Maintenance Mode.
B. Hardware virtualization is not enabled on the other ESXi host(s).
C. The other ESXi host(s) are in Quarantine Mode.
D. Hardware MMU is enabled on the other
E. SXi host(s).
【多选题】
Storage capabilities be populated in what two ways? (Choose two.)___
A. The administrator can use tags to describe capabilities.
B. Default capabilities are provided by vCenter Server.
C. Datastores can advertise their capabilities through VAAI.
D. Datastores can advertise their capabilities through VASA.
【多选题】
In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)___
A. Promiscuous mode
B. DPM
C. LLDP
D. CDP
【多选题】
Virtual Volumes supports which three VMware features? (Choose three.)___
A. Instant Clones
B. Distributed Resource Scheduler
C. Linked Clones
D. vMotion
E. Storage Distributed Resource Scheduler
【多选题】
vSphere DRS helps to balance virtual machines with available resources in a vSphere cluster. What three types of resources can be taken into account for balancing? (Choose three.)___
A. CPU
B. physical NIC saturation of an ESXi host
C. virtual NIC saturation of a virtual machine
D. RAM
E. storage latency
【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
【多选题】
Which are four attributes of the Active vCenter HA node? (Choose four)___
A. It uses the vCenter HA network to communicate with the Witness node.
B. It constantly replicates vPostgres data with the Witness node.
C. It uses a public IP address for the management interface.
D. It runs the active vCenter Server Appliance instance.
E. It uses the vCenter HA network for replication of data to the Passive node.
F. It provides a quorum to protect against split-brain situations.
【多选题】
Which are two vCenter Server two-factor authentication methods? (Choose two.)___
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
【多选题】
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)___
A. Virtual SAN traffic
B. NFS traffic
C. vMotion traffic
D. vSphere HA traffic
E. Fault Tolerance logging traffic
【多选题】
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)___
A. Local Windows OS users and groups
B. Configuration
C. Custom ports
D. FQDN
E. Historical and Performance data
【多选题】
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)___
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
【多选题】
An administrator cannot enable multi-processor Fault Tolerance (SMP-FT) for a virtual machine. Which are two possible causes for this? (Choose two.)___
A. The virtual machine is running on a vSAN datastore.
B. The Fault Tolerance network is using a 10Gbit uplink.
C. The virtual machine has 6 vCPUs assigned.
D. The virtual machine has a 1TB VMDK attached.
E. The virtual machine has snapshots present.
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
推荐试题
【单选题】
以下哪个不是空调系统的控制器___
A. 组件控制器
B. 区域控制器
C. 座舱增压控制器
D. 引气管理计算机
【单选题】
组件控制器的作用是什么___
A. 控制相应的组件和FCV
B. 控制配平活门
C. 控制区域控制器
D. 控制座舱增压
【单选题】
配平空气活门由什么控制器控制?___
A. 组件控制器
B. 区域控制器
C. 管道过热传感器
D. D热空气压力调节活门
【单选题】
电子舱通风系统的作用是___
A. 避免电子舱机构损坏
B. 确保电子舱保持足够的温度
C. 给电子舱通风
D. 避免电子舱有通风
【单选题】
空调防冰活门的主要作用是什么?___
A. 防止初级热交换器结冰
B. B防止主热交换器结冰
C. C防止组件冷凝器结冰
D. D增加去涡轮的空气流量
【单选题】
区域控制器的作用是___
A. 控制区域温度
B. 控制流量控制活门
C. 控制组件
D. 控制组件控制器
【单选题】
冲压进气门的作用是___
A. 在组件失效时确保客舱通风
B. 供气给组件压缩机
C. 调节到热交换器的空气流量
D. 以上都不对
【单选题】
空调组件的防冰活门的作用是___
A. 防止主热交换器结冰
B. 防止次级热交换器结冰
C. 防止冷凝器结冰
D. 以上都不对
【单选题】
空调组件的旁通活门的作用是___
A. 减少到压缩机的流量
B. 调节组件出口温度
C. 增加到涡轮的空气流量
D. 以上都不对
【单选题】
配平活门的作用是___
A. 加入冷空气来调节区域温度
B. 加入热空气来调节区域温度
C. 调节热空气压力
D. 调节热空气流量
【单选题】
最大正常客舱高度为:___
A. 9550+350英尺
B. 8000英尺
C. 14000英尺
D. 11000英尺
【单选题】
配平空气活门的控制是由:___
A. 区域控制器
B. 空调组件控制器
C. 热空气压力调节活门
D. 驾驶舱人工控制
【单选题】
正常情况下,根据驾驶舱空气控制面板和乘务员面板所选择的区域温度___
A. 配平空气活门控制加入空调分配管路的热空气来获得需要的客舱温度
B. 配平空气活门控制加入空调分配管路的冷空气来获得需要的客舱温度
C. 调节组件流量活门开度大小,控制组件的工作效率来获得需要的客舱温度
D. 调节冲压空气活门开度大小,控制组件热交换器工作效率,从而获得需要的客舱温度
【单选题】
配平空气活门的作用是什么?___
A. 增加冷空气来优化控制区域温度
B. 增加热空气来优化控制区域温度
C. 调节热空气压力
D. 以上都不对
【单选题】
冲压空气进出口门的作用是什么?___
A. 调节经过压气机的空气
B. 调节经过涡轮的空气
C. 调节经过热交换器的空气
D. 以上都不正确
【单选题】
空调混合总管位于___
A. 电子舱
B. 前货舱后壁板后
C. 散装货舱侧壁板后
D. 空调舱
【单选题】
空调舱通风的作用是___
A. 空调舱通风由电子设备通风控制器监控,由NACA进气口引入冲压空气进行通风
B. 空调舱通风由组件控制器监控,由NACA进气口引入冲压空气进行通风
C. 空调舱通风由区域温度控制器监控,由NACA进气口引入冲压空气进行通风
D. 空调舱通风由增压控制器监控,由NACA进气口引入冲压空气进行通风
【单选题】
如果想知道客舱的实际温度和设定温度,可以看那个ECAM的系统页面?___
A. 增压页面(PRESS)
B. 空调页面(COND)
C. 引气页面(BLEED)
D. 门和氧气页面(DOOR/OXY)
【单选题】
如果想知道外流活门的开关状态,可以看那个ECAM的系统页面?___
A. 增压页面(PRESS)
B. 空调页面(COND)
C. 引气页面(BLEED)
D. 门和氧气页面(DOOR/OXY)
【单选题】
如果想知道温度控制活门(TCV)的状态以及组件出口温度,可以看那个ECAM的系统页面?___
A. 增压页面(PRESS)
B. 空调页面(COND)
C. 引气页面(BLEED)
D. 门和氧气页面(DOOR/OXY)
【单选题】
如果想知道流量控制活门(FCV)的开关状态,可以看那个ECAM的系统页面?___
A. 增压页面(PRESS)
B. 空调页面(COND)
C. 引气页面(BLEED)
D. 以上都可以
【单选题】
再循环风扇过热停止运转后___
A. 可以通过维护控制面板的复位电门进行复位
B. 可以在MCDU通过CMC进行复位
C. 可以在风扇上按压复位电门进行复位
D. 应该更换该循环风扇,送厂家进行检修
【单选题】
当起动发动机时,组件流量控制活门自动工作在多少流量?___
A. 高流量
B. 正常流量
C. 低流量
D. 关闭
【单选题】
当飞机起飞时,组件流量控制活门自动工作在多少流量?___
A. 高流量
B. 正常流量
C. 低流量
D. 关闭
【单选题】
当组件控制器故障后,那个活门控制组件出口温度在11摄氏度左右?___
A. 温度控制活门
B. 流量控制活门
C. 旁通活门
D. 防冰活门
【单选题】
配平空气压力调节活门的作用是:___
A. 调节冷空气压力
B. 调节熱空气压力
C. 调节混合空气的压力
D. 调节掺混活门位置
【单选题】
再循环活门的作用是:___
A. 当双组件不工作时,关闭,切断去到电子舱的混合空气
B. 当双组件不工作的时候,关闭,切断去到电子舱的再循环空气
C. 当双组件不工作的时候,关闭,保证电子舱通风冷却的效果
D. 当双组件不工作的时候,切断去到电子舱的冷却空气
【单选题】
再循环风扇和再循环活门___
A. 由CAB FAN电门通过VC控制
B. 由CAB FAN电门通过PC控制
C. 由VC自动控制
D. 由PC自动控制
【单选题】
配平空气关断活门的作用是:___
A. 一旦出现过压现象的时候,切断掺混空气
B. 当管道过热的时候,切断熱空气气路
C. 当系统故障时,切断空调组件的流量
D. 当一个掺混空气压力调节活门故障时,打开,使熱空气可以供到相应的管路
【单选题】
配平空气活门的作用:___
A. 增加熱空气到冷空气,得到相应的区域温度
B. 增加熱空气到混合空气,得到相应的区域温度
C. 调节熱空气的压力
D. 调节混合空气的压力
【单选题】
温度控制活门的作用:___
A. 调节去到压气机的冷空气
B. 调节去到压气机的熱空气
C. 调节去到涡轮的冷空气
D. 调节去到涡轮的热空气
【单选题】
防冰活门的主要作用是:___
A. 防止第一级热交换器结冰
B. 防止第二级热交换器结冰
C. 防止ACM涡轮结冰
D. 防止冷凝器结冰
【单选题】
冲压进气系统进气门的作用:___
A. 当双组件故障时,提供客舱的通风
B. 调节通过热交换器的冲压空气量
C. 提供空气到组件压气机
D. 提供空气到组件涡轮
【单选题】
空调组件旁通活门的作用是:___
A. 当ACM故障时,旁通ACM
B. 当相应的组件控制器故障时,旁通ACM
C. 当区域控制器故障时,旁通ACM
D. 当温度调节活门故障时,旁通ACM
【单选题】
空调组件再加热器的作用是:___
A. 给组件出口的冷空气,再加热,调节温度
B. 给进入压气机的空气再加热,调节温度
C. 给进入涡轮的空气再加热,蒸发掉残余的水分微粒
D. 给涡轮出口的空气再加热
【单选题】
前货舱冷却系统的隔离活门何时关闭___
A. 飞机在空中
B. 双组件故障
C. 排气风扇故障
D. 前货舱烟雾警告
【单选题】
前货舱通风系统,在管道过热的情况下,哪一个活门会关闭___
A. 出口隔离活门
B. 进口隔离活门
C. 掺混空气活门
D. 冷却空气活门
【单选题】
关于客舱增压控制,下面说法正确的是:___
A. 两个外流活门,一个负释压活门,两个安全活门
B. 两个外流活门,两个负释压活门,两个安全活门
C. 一个外流活门,一个负释压活门,两个安全活门
D. 两个外流活门,一个负释压活门,一个安全活门
【单选题】
对于外流活门说法正确的是:___
A. 有一个交流马达,两个直流马达
B. 有两个交流马达,一个直流马达
C. 有三个交流马达
D. 有三个直流马达
【单选题】
驾驶舱组件控制电门内的“FAULT故障“灯什么情况会点亮?___
A. 活门位置与电门位置不一致
B. 活门位置与电门位置一致
C. 组件出口压力过低
D. 组件出口压力过高