【单选题】
6502电气集中ZQJ不能励磁的故障现象_______。[322020201]___
A. 办理取消进路手续时，总取消表示灯不亮，信号可以取消。
B. 总取消和总人解按钮表示灯均不亮。
C. 办理取消进路手续时，总取消表示灯不亮，且信号不能取消。
D. 总取消和总人解按钮表示灯均亮。
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
6502电气集中ZRJ不能励磁的故障现象_______。[322020201]___
A. 办理取消进路手续时，总取消表示灯不亮，信号可以取消。
B. 总取消和总人解按钮表示灯均不亮。
C. 办理取消进路手续时，总取消表示灯不亮，且信号不能取消。
D. 总取消和总人解按钮表示灯均亮。
【单选题】
6502电气集中控制台引来的各种电源线以及从组合架引来的接通道岔表示电源线,都先连到就近的K1段控制台零层4柱端子板上,其中_______电源,考虑到电流较大,还需经过汇流排端子转接。[331030203]___
A. KZ、KF、JZ三种电源
B. KZ、KF、DZ三种电源
C. KZ、KF两种电源
D. KZ、KF、JF三种电源
【单选题】
6502电气集中组合架六列侧面端子的用途,原则上规定:除定型网络线以外,组合与组合之间的联系用_______。[322030203]___
A. 01与02
B. 02与03
C. 03与04
D. 06
【单选题】
6502电气集中，执行组电路中，第8线检查的基本联锁条件是_______。[333020201]___
A. 道岔位置正确，进路空闲。
B. 道岔位置正确，敌对进路未建立。
C. 进路空闲，敌对进路未建立，信号正常。
D. 道岔位置正确，进路空闲，敌对进路未建立。
【单选题】
在控制台上区分7，8，9线故障时，可在控制台上增加办理引导进路锁闭操作，则可根据原来办理的进路，判断出故障所处位置，例如：若原来办理的是接车进路，办理引导锁闭后进路无白光带，说明_______。[333020201]___
A. 9线的QJJ和GJJ故障
B. 7线的KJ故障
C. 8线的XJJ故障
D. 9线的GJJ故障
【单选题】
控制台零层一块定型配线的端子板，可供_______使用，使用后的空余端子也不再另作它用。[321030203]___
A. 一组单动道岔
B. 一架信号机
C. 一组单动道岔和一架信号机
D. 一组单动道岔和一组双动道岔
【单选题】
列车开始继电器电路中，当进路内方第一道岔区段解锁后，_______复原，断开LKJ第二条自闭电路。[321020201]___
A. AJ
B. KJ
C. 方向继电器
D. FKJ
【单选题】
组合架零层配线中，从组合架正面看，从左向右顺序编号，_______为电源端子板。[322030203]___
A. 01～03
B. 04～06
C. 07～08
D. 09～013
【单选题】
组合架零层配线中，从组合架正面看，从左向右顺序编号，_______为熔断器端子板。[322030203]___
A. 01～03
B. 04～06
C. 07～08
D. 09～013
【单选题】
组合架零层配线中，从组合架正面看，从左向右顺序编号，_______为供条件电源用的18柱端子板。[322030203]___
A. 01～03
B. 04～06
C. 07～08
D. 09～013
【单选题】
辅助开始继电器电路中，FKJ不能励磁的故障现象是_______。[322020201]___
A. 始端按钮闪光后熄灭，不能点亮稳定灯光，进路不锁闭
B. 始端一直闪光，不能点亮稳定灯光，进路不锁闭
C. 始端先点稳定灯光(终端灭灯)，接着始端稳光自动熄灭
D. 始端按钮点稳定灯光，终端按钮灭灯，进路无白光带
【单选题】
辅助开始继电器电路中，在有道岔转换时，FKJ不能自闭的故障现象是_______。[332020201]___
A. 始端按钮闪光后熄灭，不能点亮稳定灯光，进路不锁闭
B. 始端一直闪光，不能点亮稳定灯光，进路不锁闭
C. 始端先点稳定灯光(终端灭灯)，接着始端稳光自动熄灭
D. 始端按钮点稳定灯光，终端按钮灭灯，进路无白光带
【单选题】
开始继电器电路中，进路无道岔转换时，利用始端_______后接点，FKJ的前接点接通KJ励磁电路。[321020201]___
A. LKJ
B. KJ
C. JXJ
D. XJJ
【单选题】
6502电气集中，组合架零层XJZ，XJF熔断器熔断，则_______。[322020201]___
A. 有一架及以上信号复示器闪光
B. 只有一架信号复示器闪光
C. 全站信号不能开放
D. 一个咽喉的信号灭灯
【单选题】
6502电气集中，组合架零层DJZ，DJF熔断器熔断，则_______。[322020201]___
A. 有一组道岔无表示，且有挤岔报警
B. 有一组及以上道岔无表示，且有挤岔报警
C. 全站道岔不能操纵
D. 有一组及以上道岔不能操纵
【单选题】
6502电气集中，组合架零层DZ，DF熔断器熔断，则_______。[323020201]___
A. 有一组道岔无表示，且有挤岔报警
B. 有一组及以上道岔无表示，且有挤岔报警
C. 全站道岔不能操纵
D. 有一组及以上道岔不能操纵
【单选题】
只有一个离去区段空闲,出站信号机点亮黄灯时_______。[322020201]___
A. LXJ↓、DXJ↓、DJ↑
B. LXJ↑、DXJ↑、DJ↓
C. LXJ↑、ZXJ↑、2LQJ↓、DJ↑
D. LXJ↓、DXJ↑、DJ↑
【单选题】
照查继电器电路中,ZCJ设置在_______。[321020201]___
A. 只设置在1LXF中
B. 只设置在2LXF中
C. 设置在1LXF或2LXF中
D. 设置在LXZ或1LXZ或2LXF中
【单选题】
只有_______的按钮才能兼作相反方向的调车进路的变通按钮。[323010201]___
A. 单置调车信号机
B. 并置调车信号机
C. 差置调车信号机
D. 通过信号机
【单选题】
只有在变通进路上没有调车按钮可兼作变通按钮的情况下，才特设一个_______。[321010201]___
A. 变通按钮
B. 单置调车按钮
C. 并置调车按钮
D. 差置调车按钮
【单选题】
方向电源，例如“KZ-共用-H”是通过四个方向继电器后接点和_______后接点接通的正极性电源。[321020201]___
A. ZQJ
B. ZRJ
C. 1RJJ
D. 2RJJ
【单选题】
有两个离去区段都空闲,出站信号机点亮绿灯时_______。[322020201]___
A. LXJ↓、DXJ↓、DJ↑
B. LXJ↑、DXJ↑、DJ↓
C. LXJ↑、ZXJ↑、2LQJ↑、DJ↑
D. LXJ↓、DXJ↑、DJ↑
【单选题】
在整个网络中，对每条具体进路的电路来说，进路的区分用_______接点确定。[321020201]___
A. DBJ或FBJ
B. DCJ或FCJ
C. 1LJ或2LJ
D. DBJ
【单选题】
当道岔在转换或发生挤岔故障，停电或断线等故障时，必须保证DBJ和FBJ落下，因此必须使用_______。[332010204]___
A. 安全型继电器
B. 有极型继电器
C. 电码型继电器
D. 非安全型继电器
【单选题】
在ZQJ与ZRJ的线圈上都并联有电容C和电阻R，其作用是为了使继电器有_______左右的缓放时间。[321010103]___
A. 1s
B. 2s
C. 3s
D. 4s
推荐试题
【单选题】
What is the minimum number of hosts that must contribute capacity to a non-ROBO single site VMware vSAN cluster?___
A. 1
B. 64
C. 3
D. 2
【单选题】
Which guest operating system supports PVRDMA?___
A. Windows (32-Bit)
B. Linux (32-Bit)
C. Windows (64-Bit)
D. Linux (64-Bit)
【单选题】
What is the correct way to replace the certificate on an existing vCenter Server that is part of a vCenter HA configuration?___
A. Put the vCenter HA in Maintenance mode, replace the certificate, exit Maintenance mode.
B. Shut down Passive and Witness nodes and replace the certificate on the Active node.
C. Remove the Passive and Witness nodes, replace the certificate, reconfigure the cluster.
D. Replace the certificate while all nodes are participating in the cluster.
【单选题】
The vSphere Data Protection performance analysis results in the “Conditionally Passed” status. What can cause this condition?___
A. The results did not meet the minimum performance expectations.
B. The read, write, and seek tests were successful.
C. The read and write tests were successful but the seek test failed.
D. The read and write tests were successful but the seek test skipped.
【单选题】
A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks. What is the quota that should be reserved for the network resource pool?___
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
【单选题】
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors. How can the administrator exclude the contractor group from some of the critical VMs?___
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for noncontractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
【单选题】
In an ESXi 6.5 cluster only "NFS datastore has running or registered virtual machines" returns. A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?___
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
