【单选题】
C.电流减少，电压升高 D.电流减少，电压降低12255.微型计算机的硬盘正在工作时，应特别注意避免___。
A. 震动或突然断电
B. 使用鼠标
C. 噪声影响
D. 光线直射
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
有一个直流电路，电源电动势为 10V，电源内阻为 1 欧姆，向负载 R 供电。此时负载从电源获得最大功率，则负载电阻 R 为___欧姆。
A. 1
B. 9
C. ∞
D. 1.5
【单选题】
RLC 串联电路中，如果把 L 增大一倍，C 减小到原有的 1/4，则该电路的谐振频率变为原频率 f 的___。
A. 1.414 倍
B. 2 倍
C. 4 倍
D. 1/2 倍
【单选题】
对于低压用电系统为了获得 380/220V 两种供电电压，习惯上采用中性点___构成三相四线制供电方式。
A. 直接接地
B. 不接地
C. 经消弧绕组接地
D. 经高阻抗接地
【单选题】
C.电流比误差 D.电压比误差12276.在变压器中性点装设消弧线圈的目的是___。
A. 补偿电网接地的电容电流
B. 限制变压器故障电流
C. 提高电网电压水平
D. 吸收无功
【单选题】
某线路更换 TA 重新投运后，后台显示的功率值和电流值均为线路实际负荷的一半，其可能原因是(___。
A. 线路的 TA 变比增大一倍
B. 变送器的
C. T 有一相被短接
【单选题】
C.变送器故障 D.线路的 TA 变比缩小了一倍12292.下列不属于监控系统站控层的设备是___。
A. 交流采样装置
B. 前置机
C. 数据通信网关
D. 操作员工作站
【单选题】
按照《DLT5149-2001220-500kV 变电所计算机监控系统设计技术规程》规定，变电站计算机监控系统的同期功能一般在___上实现。
A. 间隔层
B. 设备层
C. 站控层
D. 远方调度
【单选题】
C.事故追忆 D.事故及参数越限告警12295.IEC870-5-101 规约中类型标识 2E（十六进制）代表的含义是___。
A. 遥控
B. 遥测
C. 遥信
D. 电度
【单选题】
C.收发互不相关，独立传输 D.平衡或非平衡方式均可12299.关系数据库的规范化理论主要解决的问题是___。
A. 如何构造合适的数据逻辑结构
B. 如何构造合适的数据物理结构
【单选题】
C.如何构造合适的应用程序界面 D.如何控制不同用户的数据操作权限12300.___使用专用机床比较合适。
A. 大批量加工
B. 复杂型面加工
C. 齿轮齿形加工
D. 新产品试加工
【单选题】
精密加工是指___的加工技术。
A. 加工精度为 0.1μm、表面粗糙度为 Ra0.1～0.01μm
B. 加工误差小于 0.1μm、表面粗糙度小于 Ra0.01μm
C. 加工精度为 1μm、表面粗糙度为 Ra0.2～0.1μm
D. 加工精度为 2μm、表面粗糙度为 Ra0.8～0.2μm
【单选题】
数控车床 Z 轴步进电动机步距角为 0.36 度，电动机通过齿轮副或同步齿形带与滚珠丝杠联接，传动比为 5：6（减速），如 Z 轴脉冲当量为 0.01mm，问滚珠丝杠的螺距应为___。
A. 12mm
B. 10mm
C. 6mm
D. 5mm
【单选题】
关于干切削加工，___描述是不正确的。
A. 干切削机床最好采用立式机床，干铣削机床最好采用卧式机床
B. 干切削加工最好采用涂层刀具
C. 干切削适合加工尺寸精度和表面粗糙度要求高的非封闭零件
【单选题】
D.目前干切削有色金属和铸铁比较成熟，而干切削钢材、高强度钢材则存在问题较多13012.执行程序 M01 指令，应配合操作面板之___之开关。
A. OPTION STOP
B. “/”SLASH
C. COOLANT
D. DRY RUN
【单选题】
数控机床是应用了数控技术的机床，数控系统是它的控制指挥中心，是用数字信号控制机床运动及其加工过程的。目前比较多的是采用微处理器数控系统，称为___系统。
A. CNC
B. CPU
C. CAD
D. RAM
【单选题】
用 0.02mm/m 精度的水平仪，检验数控铣床工作台面的安装水平时，若水平仪气泡向左偏 2 格时，则表示工作台面右端___。
A. 低，其倾斜度为 8″
B. 低，其倾斜度为 2″
【单选题】
C.低，其倾斜度为 4″ D.高，其倾斜度为 4″ 13037.对数控机床气动系统的维护与保养说法不正确的是___。
A. 注意调节工作压力，工作压力一般为 0.8MPa
B. 检查系统中油雾器的供油量，保证空气中有适量的润滑油来润滑气动元件，防止生锈、磨损造成空气泄漏和元件动作失灵
C. 保持气动系统的密封性，定期检查更换密封件
D. 选用合适的过滤器，清除压缩空气中的杂质和水分
【单选题】
C.提高鉴向倍频的倍数 D.使指示光栅刻线与标尺光栅刻线的夹角为 0 度13041.静压导轨的摩擦系数约为___。
A. 0.05
B. 0.005
C. 0.0005
D. 0.5
推荐试题
【单选题】
A vSphere content library administrator is attempting to unpublish the content library, but the option is grayed out as shown in the Exhibit. Which statement identifies the reason for not being able to unpublish? ___
A. The content library is optimized for syncing over HTTP.
B. A synchronization operation is in progress with this content library.
C. There are active subscriptions on this content library.
D. Underlying storage for this content library is not accessible.
【单选题】
Assuming a mirrored (RAID-1) object configuration, how many hosts must contribute storage in a non-stretched VMware vSAN cluster to satisfy the “Number of failures to tolerate” policy option?“n” is the desired “Number of failures to tolerate” value for all options.___
A. 2n+2
B. 2n
C. 2n+1
D. 3n
【单选题】
An administrator must change the statistics level for short-term performance monitoring and wants to collect metrics for all counters, excluding minimum and maximum rollup values. What would be the statistics level?___
A. Level 3
B. Level 1
C. Level 2
D. Level 4
【单选题】
In a vSphere environment, two resource pools are created as shown in the Exhibit. Each VM is configured with 1 GB of memory. When the administrator tried to power on VM3, the operation failed. What action in the resource pool settings will allow VM3 to power on successfully?___
A. Deselect Expandable Memory Reservation
B. Increase Memory Reservation
C. Deselect Expandable CPU Reservation
D. Increase the CPU Reservation
【单选题】
Which network is used by vSphere HA when VMware vSAN is enabled?___
A. Management network
B. vSphere Replication network
C. vMotion network
D. VSAN network
【单选题】
Which statement is correct when migrating from a Windows vCenter Server to the vCenter Server Appliance 6.5?___
A. Migration deployments do not migrate local OS users from the source vCenter Server.
B. Migration deployments support DHCP on the source vCenter Server.
C. Migration deployments allow the source vCenter Server to remain powered on afterwards.
D. Migration deployments support custom ports for all services on the source vCenter Server.
【单选题】
How can failback of a recovered virtual machine in vSphere Replication be performed?___
A. No action required, because failback is automatically performed to the source site.
B. Configure a new replication in the reverse direction at the target site.
C. Disable or Stop the virtual machine replication on the source site.
D. Power off and unregister the virtual machine on the target site.
【单选题】
After upgrading the vSphere infrastructure and VMware Tools to version 6.5, the “Upgrade VM Compatibility” option is grayed out in the vSphere Web Client. (See Exhibit.) What must the administrator do to enable the VM compatibility upgrade?___
A. VMware Tools should be upgraded last.
B. Restart the ESXi server.
C. Uninstall VMware Tools.
D. Power off the virtual machine.
【单选题】
What availability mode does vCenter HA provide?___
A. Active-Passive
B. Active-Standby
C. Active-Active
D. Load-balanced
【单选题】
In which scenario will vSphere DRS balance resources when set to Fully Automated?___
A. Hosts with only shared storage
B. Hosts are part of a vSphere HA cluster
C. Power Management is set to Balanced on hosts
D. Hosts with shared or non-shared storage
【单选题】
What VMware technology can be used to move physical servers to the vSphere infrastructure?___
A. VMware vMotion
B. VMware Converter
C. VMware vCenter Server
D. OVF transport
【单选题】
Upgrading vCenter Server with Microsoft SQL database fails with the following error message: The DB User entered does not have the required permissions needed to install and configure vCenter Server with the selected DB. Please correct the following error(s): %sWhat could cause this error?___
A. incorrect ports open on SQL Server
B. incorrect database on the SQL server
C. incorrect compatibility mode on the SQL server
D. incorrect permission on SQL Server database
【单选题】
What is a potential downside of having more than four paths per datastore?___
A. limits the storage protocols
B. increases storage latency for VM
C. limits the path selection policies
D. limits the number of LUNs per host
【单选题】
Which feature facilitates the sharing of templates via vCenter Server?___
A. Content Library
B. OVF
C. folders
D. vApp
【单选题】
A vSphere Administrator is in the process of configuring replication for a virtual machine, but is not able to select the Recovery Point Objective (RPO) value of 5 minutes. Which statement could explain why the RPO value cannot be lower than 15 minutes?___
A. The OS quiescing option is selected for Replication options.
B. The virtual machine hardware version is not compatible.
C. The target and source sites use different types of datastores.
D. The target and source sites are not using VMFS 6.0 datastore.
【单选题】
What advanced parameter defines a custom isolation IP address for a vSphere HA cluster?___
A. das.usedefaultisolationaddress
B. das.isolationshutdowntimeout
C. fdm.isolationpolicydelaysec
D. das.isolationaddress
【单选题】
Which method is supported for backing up the virtual machine that contains vCenter Server?___
A. differential
B. incremental
C. full image
D. individual disks
【单选题】
A vSphere Administrator must ensure that a user is able to view and manage the system configuration in vSphere Web Client. In the vCenter Single Sign-On domain, which group should the user be a part of?___
A. SystemConfiguration.BashShellAdministrators
B. ComponentManager. Administrators
C. Administrators
D. SystemConfiguration.Administrators
【单选题】
What is the minimum number of hosts that must contribute capacity to a non-ROBO single site VMware vSAN cluster?___
A. 1
B. 64
C. 3
D. 2
【单选题】
Which guest operating system supports PVRDMA?___
A. Windows (32-Bit)
B. Linux (32-Bit)
C. Windows (64-Bit)
D. Linux (64-Bit)
【单选题】
What is the correct way to replace the certificate on an existing vCenter Server that is part of a vCenter HA configuration?___
A. Put the vCenter HA in Maintenance mode, replace the certificate, exit Maintenance mode.
B. Shut down Passive and Witness nodes and replace the certificate on the Active node.
C. Remove the Passive and Witness nodes, replace the certificate, reconfigure the cluster.
D. Replace the certificate while all nodes are participating in the cluster.
【单选题】
The vSphere Data Protection performance analysis results in the “Conditionally Passed” status. What can cause this condition?___
A. The results did not meet the minimum performance expectations.
B. The read, write, and seek tests were successful.
C. The read and write tests were successful but the seek test failed.
D. The read and write tests were successful but the seek test skipped.
【单选题】
A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks. What is the quota that should be reserved for the network resource pool?___
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
【单选题】
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors. How can the administrator exclude the contractor group from some of the critical VMs?___
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for noncontractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
【单选题】
In an ESXi 6.5 cluster only "NFS datastore has running or registered virtual machines" returns. A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?___
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
