【单选题】
(76672)橡胶制品是以生胶为基础,并加入适量的___和增强材料组成的。(1.0分)
A. 水
B. 植物油
C. 耦合剂
D. 配合剂
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
(76673)粉末冶金材料是指用___冶金工艺制得的多孔、半致密或全致密材料。(1.0分)
A. 压型
B. 粉末
C. 烧结
D. 混合剂
【单选题】
(76674)粉末冶金材料具有传统___工艺所无法获得的独特的化学组成和物理、力学性能。(1.0分)
A. 熔铸
B. 浇铸
C. 化合
D. 锻造
【单选题】
(76675)粉末冶金结构材料由于材料内部有残余孔隙存在,其延展性和冲击值比化学成分相同的铸锻件低, 从而使其___范围受限。(1.0分)
A. 空间
B. 制作
C. 结构
D. 应用
【单选题】
(76676)钢的淬火加热温度都应在___奥氏体区。(1.0分)
A. 单相
B. 多相
C. 双相
D. 合相
【单选题】
(76677)对于淬火温度过高而造成淬火硬度不足的工件,可在较低温度下重新___进行补救。(1.0分)
A. 淬火
B. 回火
C. 正火
D. 退火
【单选题】
(76678)淬火后的钢一般需要进行及时___。(1.0分)
A. 正火
B. 退火
C. 回火
D. 淬火
【单选题】
(76681)调质处理是___复合热处理工艺。(1.0分)
A. 淬火+高温回火
B. 淬火+中温回火
C. 淬火+低温回火
D. 淬火+自然冷却
【单选题】
(76682)为使低碳钢便于切削加工,应采用___热处理。(1.0分)
A. 完全退火
B. 球化退火
C. 正火
D. 回火
【单选题】
(76683)铸钢构架(侧架)采用正火或___热处理。(1.0分)
A. 淬火
B. 冷处理
C. 退火
D. 回火
【单选题】
(76684)消除过共析钢中的网状渗碳体可以用___。(1.0分)
A. 去应力退火
B. 球化退火
C. 完全退火
D. 回火
【单选题】
(76685)调质处理就是___热处理。(1.0分)
A. 淬火+高温火
B. 淬火+中温回火
C. 淬火+低温回火
D. 淬火+自然冷却
【单选题】
(76686)拉伸实验时,试样拉断前所能承受的最大应力称为材料的 ___。(1.0分)
A. 屈服强度
B. 抗拉强度
C. 弹性极限
D. 拉伸强度
【单选题】
(76687)用15钢制造的齿轮,要求齿轮表面硬度高而心部具有良好的韧性,应采用___热处理。(1.0分)
A. 淬火+低温回火
B. 表面淬火+低温回火
C. 渗碳+淬火+低温回火
D. 化学
【单选题】
(76688)为改善20钢的切削加工性能,通常采用___热处理。(1.0分)
A. 完全退火
B. 球化退火
C. 正火
D. 低温回火
【单选题】
(76689)改善10号钢的切削加工性能,通常采用___热处理。(1.0分)
A. 完全退火
B. 球化退火
C. 去应力退火
D. 正火
【单选题】
(76690)常规热处理不包括___。(1.0分)
A. 化学热处理
B. 退火
C. 正火
D. 淬火
【单选题】
(76691)基本视图一共有三个,它们的名称分别是主视图、俯视图、___。(1.0分)
A. 仰视图
B. 左视图
C. 侧视图
D. 后视图
【单选题】
(76692)除基本视图外,还有仰视图、___和后视图三种视图。(1.0分)
A. 内视图
B. 前视图
C. 右视图
D. 背视图
【单选题】
(76694)___是将物体向不平行于基本投影面投射所得的视图。(1.0分)
A. 仰视图
B. 左视图
C. 斜视图
D. 后视图
【单选题】
(76695)零件图中的图形,只是用来表达零件的___,而零件各部分的真实大小及相对位置,则靠标注尺 寸来确定。(1.0分)
A. 尺寸
B. 形状
C. 大小
D. 位置
【单选题】
(76696)允许将斜视图进行___配置。(1.0分)
A. 重合
B. 平行
C. 旋转
D. 叠位
【单选题】
(76697)剖视图的剖切方法可分为全剖、___、局部剖、阶梯剖、组合剖五种。(1.0分)
A. 外剖
B. 内剖
C. 角剖
D. 半剖
【单选题】
(76698)重合剖面的图形应画在视图之内,断面的轮廓线用___绘制。(1.0分)
A. 细实线
B. 粗实线
C. 细虚线
D. 粗虚线
【单选题】
(76699)图样中的图形只能表达零件的结构形状,零件的真实大小应以图样上所标注的___为依据。(1.0 分)
A. 线条
B. 尺寸
C. 内容
D. 比例
【单选题】
(76700)移出剖面和重合剖面的区别是:移出剖面是画在视图轮廓___的剖面,重合剖面是画在视图轮廓 里面的剖面。(1.0分)
A. 上面
B. 下面
C. 外面
D. 里面
【单选题】
(76701)在剖视图中,内螺纹的大径用D表示,小径用D1表示,终止线用___表示。(1.0分)
A. 细实线
B. 粗实线
C. 细虚线
D. 粗虚线
【单选题】
(76702)剖面图用来表达零件的___形状,剖面可分为实体部分和空心部分两种。(1.0分)
A. 内部
B. 外部
C. 结构
D. 轮廓
【单选题】
(76703)零件图的技术要求是指制造和检验该零件时应达到的___要求。(1.0分)
A. 设计
B. 加工
C. 结构
D. 质量
【单选题】
(76705)由于零件的结构形状是多种多样的,所以在画图前应对零件进行结构形状分析,并针对不同零件 的特点选择___及其它视图,确定最佳表达方案。(1.0分)
A. 主视图
B. 左视图
C. 侧视图
D. 后视图
【单选题】
(76706)螺纹按其用途可分为连接螺纹和___螺纹。(1.0分)
A. 自锁
B. 传动
C. 机械
D. 三角形
【单选题】
(76707)连接螺纹主要起连接和___的作用。(1.0分)
A. 固定
B. 配合
C. 调整
D. 组装
【单选题】
(76708)磨螺纹是在专用的螺纹磨床上进行的,主要是对需要___处理(硬度较高和精度要求高)的螺纹 进行精加工。(1.0分)
A. 热
B. 冷
C. 精
D. 机械
【单选题】
(76709)FS防松螺母是运用弹簧的弹性的___原理,以弹簧旋紧与螺母螺栓间接吻合的紧固件。(1.0分)
A. 压力
B. 弹力
C. 切口
D. 摩擦
【单选题】
(76710)FS防松螺母可以在螺栓的任意位置上起___防松作用。(1.0分)
A. 自锁
B. 固定
C. 防脱
D. 紧固
【单选题】
(76711)FS防松螺母必须与头部有“___”级标记和精度等级为6g的螺栓配套使用。(1.0分)
A. 35号钢
B. 8.8
C. 10.9
D. 45号钢
【单选题】
(76712)SFT型折头螺栓与SFT防松螺母配合使用,以达到切实可靠的___效果。(1.0分)
A. 使用
B. 防松
C. 美观
D. 直接
【单选题】
(76713)折头螺栓与防松螺母安装时,要用___匀速地拧紧螺栓头部直至扳断扭矩头,不准锤击敲断扭矩 头。(1.0分)
A. 专用扳机
B. 活动扳手
C. 套筒
D. 管钳
【单选题】
(76714)扭断折头螺栓扭矩头时,折头螺栓应尽量只承受___作用,不可附加剪力。(1.0分)
A. 横向力
B. 纯扭矩
C. 敲击力
D. 顶压力
【单选题】
(76715)在螺母和工件之间加弹簧垫圈,主要目的就是起___作用。(1.0分)
A. 摩擦
B. 增高
C. 密贴
D. 防松
【单选题】
(76716)当螺母紧固后,弹簧垫片压平后产生弹力,加大螺纹间的压力,增加摩擦力,起到___作用。 (1.0分)
A. 防松
B. 摩擦
C. 密贴
D. 应力
推荐试题
【填空题】
50.精确制导技术是指采用高技术直接命中概率超过___以上的武器。
【单选题】
What is an example of social engineering?___
A. gaining access to a computer by observing the user login credentials
B. gaining access to a build through an unguarded entrance
C. gaining access to a server by using a USB stick
D. gaining access to a server room by posing as local IT
【单选题】
Which type of Layer 2 attack enables the attacker to intercept traffic that is intended for one specific recipient?___
A. BPDU attack
B. DHCP starvation I LAB
C. MAC address spoofing
D. CAM table overflow
【单选题】
Which about nested policy maps in a zone-based firewall is true ?___
A. They are limited to two leve ls in a hierarchical policy
B. Parent policies are previously defined policies that are defined by using the service policy command
C. A child policy is a new policy that uses a pre-existing policy.
D. A child policy is a new that uses a pre-existing policy
【单选题】
In which configuration do you configure the ip ospf authentication key 1 command?___
A. routing process
B. interface
C. privileged
D. global
【单选题】
Which statement about command authorization and security contexts is true?___
A. If command authorization is configured, it must be enabled on all contexts.
B. The change to command invokes a new context session with the credentials of the currently
C. AAA settings are applied on a per-context basis
D. The enable. 15 user ang admins with chang to permission ha e dfferent command authorization levels pertontext
【单选题】
Which command do you enter to enable authentication for OSPF on an interface?___
A. router(config-if)#ip ospf message-digest-key 1 md5 CIS COPASS
B. router(config-if)#ip ospf authentication message-digest
C. router(config-if)#ip ospf authentication-key CISCOPASS
D. router(config-if)#area 0 authentication message-digest
【单选题】
What feature defines a campus area network?___
A. It has a single geographic location
B. It lacks external connectivity.
C. It has a limited number of segments.
D. It has limited or restricted Internet access
【单选题】
Which type of attack most commonly involves a direct attack on a network?___
A. :phishing
B. Trojan horse
C. denial of service
D. social engineering
【单选题】
What information does the key length provide in an encryption algorithm?___
A. the cipher block size
B. the hash bloc k size
C. the number of permutations
D. the packet size
【单选题】
How do you verify TaCACS+ connectivity to a device?___
A. You successfully log in to the device by using the local credentials
B. You connect via console port and receive the login prompt.
C. You connect to the device using SSH and receive the login prompt.
D. You successfully log in to the device by using ACS credentials
【单选题】
Which term best describes the concept of preventing the modification of data in transit and in storage?___
A. availability
B. confidentially
C. fidelity
D. integrity
【单选题】
Which loS command is used to define the authentication key for ntp?___
A. switch(config )#ntp authentication-key 1 mds Clcs
B. switch(config )#ntp authenticate
C. switch(config)#ntp trusted-key 1
D. switch(config)#ntp source 192.168.0.1
【单选题】
What is true about the cisco lOS Resilient Configuration feature ?___
A. The feature can be disabled through a remote session
B. There is additional space required to secure the primary cisco lOS image file.
C. The feature automatically detects image or configuration version mismatch.
D. Remote storage is used for securing files
【单选题】
When is the default deny all policy an exception in zone-based firewalls?___
A. when traffic terminates on the router via the self zone
B. when traffic traverses two interfaces in different zones
C. when traffic traverses two interfaces in the same zone
D. when traffic sources from the router via the self zone
【单选题】
.If an access port is assigned as an isolated port in a PVLAN, which network ports can it communicate with?___
A. promiscuous ports in the same PLVAN
B. isolated ports in the same PVLAN
C. all ports in the same PAVLAN at ILAR
D. all ports in the adjacent PVLAN
【单选题】
Which IPSEC mode is used to encypt traffic directly between a client and a server VPN endpoint?___
A. quick mode
B. transport mode
C. aggressive mode
D. tunnel mode
【单选题】
Which command do you enter to verify that a vpn connection is established between two endpoints and that the connection is passing traffic? ___
A. Firewall#sh crypto session
B. Firewall#debug crypto isakmp
C. Firewall#tsh crypto ipsec sa
D. Firewall#sh crypto isakmp sa
【单选题】
which type of Pvlan port allows communication from all port types?___
A. isolated
B. in -line
C. community
D. promiscuous
【单选题】
Which command do you enter to configure your firewall to conceal internal addresses?___
A. no ip directed-broadcast
B. no ip logging facility
C. no proxy-arp
D. no ip inspect audit-trial
E. no ip inspect
F. route
【单选题】
Which feature defines a campus area network? ___
A. It has a limited number of segments.
B. It has limited or restricted Internet access
C. It lacks ex1ternal connectivity.
D. It has a single geographic location
【单选题】
What technology can you use to provide data confidentiality data integrity and data origin authentication on your network?___
A. IPSec
B. Certificate Authority
C. IKE
D. Data
E. ncryption Standards
【单选题】
which standard is a hybrid protocol that uses oakley and skerne ke y exchanges is an ISAKMP framework?___
A. SHA
B. IPSec
C.
D. ES
【单选题】
What is the actual los privilege level of User Exec mode?___
A. 1
B. 0
C. 5
D. 15
【单选题】
What is the effect of the asa command crypto isakmp nat-traversal?___
A. It opens port 500 only on the out side interface
B. It opens port 500 only on the inside interface
C. It opens port 4500 on all interfaces that are IPSec enabled
D. It opens port 4500 only on the out side interfac
【单选题】
Which Fire POWER preproce ssor engine is used to prevent SYN attacks?___
A. Inline normalization
B. IP Defragmentation
C. Ports can
D. etection
【单选题】
Which NAT type allows objects or groups to reference an IP address ?___
A. identity NAt
B. static NAT
C. dynamic
D. dynamic NAT
【单选题】
Which Auto NAT policies are processed first?___
A. Dynamic NAT with longest prefix
B. Dynamic NAT with shortest prefix
C. static NAT with longest prefix
D. static NAT with shortest prefix
【单选题】
Which feature allows a dynamic Pat pool to se lect the next address in the pat pool instead of the next port of an existing address?___
A. next IP
B. round robin
C. dynamic rotation
D. NAT address rotation
【单选题】
Which IPS detection method can you use to detect attacks that are based on the attackers IP address?___
A. anomally-based
B. policy-based
C. signature-based
D. reputation-based
【单选题】
Which type of encryption technology has the broadest platform support?___
A. software
B. middleware
C. file-level
D. hardware
【单选题】
Which type of address translation supports the initiation of comm unications bidirectionally ?___
A. multi-session PAT
B. dynamic NAT
C. dynamic PAT
D. static NAT
【单选题】
Which label is given to a person who uses existing computer scripts to hack into computers while lacking the expertise to write the own?___
A. script kiddy
B. white hat hacker
C. hacktivist
D. phreaker
【单选题】
What is the primary purpose of a defined rule in an IPS?___
A. to configure an event action that takes place when a signature is triggered
B. to define a set of actions that occur when a specific user logs in to the system
C. to configure an event action that is pre-defined by the system administrator
D. to detect internal attacks
【单选题】
Which option is the default valuce for the Diffie- Hell man group when configuring a site-to-site VPn on an asa device ?___
A. Group 1
B. Group 2
C. Group 5
D. Group 7
【单选题】
Which feature filters CoPP packets?___
A. access control lists
B. class maps
C. policy maps
D. route maps
【单选题】
Which command is used in global configuration mode to enable AAA?___
A. configure-model aaa
B. configure aaa-modelA
C. aaa new-model
D. aaa
E. XEC
【单选题】
Which statement about the given configuration is true?___
A. The single-connection command causes the device to establish one connection for all TACACS
B. The single-connection command causes the device to process one TacAcs request and then move to the next server
C. The timeout com mand causes the device to move to the next server after 20 seconds of TACACS inactive
【多选题】
What are two well-known security terms?___
A. phishing//网络钓鱼
B. ransomware //勒索软件
C. BPDU guard
D. LACP
E. hair-pinning
【多选题】
Which two commands must you enter to securely archive the primary bootset of a device___
A. router(config )#secure boot-config
B. router(config)#auto secure
C. router(config)#secure boot-image
D. router(config)#service passw ord-encryption