【多选题】
___0058.承压容器的安全附件中，属于安全泄压装置的有（ ）。
A. 压力表
B. 爆破片
C. 安全阀
D. 易熔塞
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
BCD
解析
暂无解析
相关试题
【多选题】
___0063.《锅炉房设计规范》（GB 50041—2008）规定，热力管道严禁与输送易挥发、（ ）的管道敷设在同一地沟内。
A. 易爆
B. 有害
C. 有腐蚀性介质
D. 重油管
【多选题】
___0064.《锅炉房设计规范》（GB 50041—2008）规定，热力管道严禁与输送易燃体、（ ）的管道敷设在同一地沟内。
A. 重油管
B. 可燃气体
C. 惰性气体
D. 润滑油管
【多选题】
___0067.根据《制冷空调作业安全技术规范》（AQ 7004—2007），冷库内作业人员应（ ）。
A. 携带手电筒
B. 有良好的防寒措施
C. 携带手机等通讯设备
D. 带上电暖扇等取暖工具
【多选题】
___0071.《地下有限空间作业安全技术规范 第1部分：通则》（DB11/ 852.1—2012）规定，地下有限空间作业气体检测结果应如实记录，内容包括（ ）。
A. 检测时间
B. 检测人员
C. 检测位置
D. 检测过程
【多选题】
___0072.《通用用电设备配电设计规范》（GB 50055—2011）规定，交流电动机应装设（ ）。
A. 短路保护
B. 防爆保护
C. 接地故障的保护
D. 绝缘保护
【多选题】
___0075.高压断路器有强有力的灭弧装置，既能在正常情况下接通和分断负荷电流，又能借助继电保护装置在故障情况下切断（ ）。
A. 空载电流
B. 额定电流
C. 短路电流
D. 过载电流
【多选题】
___0078.《通用用电设备配电设计规范》（GB 50055—2011）规定，每台电梯或自动扶梯的电源线应装设（ ）。
A. 隔离电器
B. 防尘保护
C. 静电保护器
D. 短路保护电器
【多选题】
___0081.（ ）的配电线路应设置漏电保护器。
A. Ⅰ类手持式及移动式临时性用电设备
B. 环境特别恶劣或潮湿场所的电气设备
C. 家用电器类或插座回路
D. 由IT系统供电的用电设备
【多选题】
___0084.根据《通用用电设备配电设计规范》（GB 50055—2011），电梯机房的每路电源进线均应装设隔离电器，并应装设在电梯机房内便于（ ）的地点。
A. 通风
B. 操作
C. 维修
D. 光照
【多选题】
___0092.防止导线短路起火的措施主要有（ ）。
A. 导线应有保护措施，避免绝缘层破损
B. 保持导线使用环境良好
C. 在敷设导线时，只能采用阻燃配管
D. 使导线与断路器匹配
【多选题】
___0093.下列属于触电事故发生规律的有（ ）。
A. 高压明显多于低压
B. 电气连接部位明显多于其他部位
C. 携带式设备和移动式设备明显多于固定设备
D. 错误操作和违章作业明显
【多选题】
___0095.造成触电事故的主要原因有（ ）。
A. 定期进行设备检查维修
B. 电气设备或电气线路安装不符合要求
C. 电气设备运行管理存在缺陷
D. 未执行安全作业流程
【多选题】
___0096.根据《通用用电设备配电设计规范》（GB 50055—2011），可采用专用线路供电的有（ ）。
A. 小容量的电焊机
B. 大容量的电焊机
C. 容量较大的电阻焊机
D. 电渣焊机
【多选题】
___0097.根据《1kV及以下配线工程施工与验收规范》（GB 50575—2010），刚性绝缘塑料导管不宜敷设在（ ）的场所。
A. 潮湿
B. 穿越高温
C. 多尘
D. 易受机械损伤
【多选题】
___0098.根据《1kV及以下配线工程施工与验收规范》（GB 50575—2010），线槽不宜敷设在（ ）场所。
A. 易受机械损伤
B. 高温场所
C. 潮湿
D. 露天场所
推荐试题
【单选题】
What is an example of social engineering？___
A. gaining access to a computer by observing the user login credentials
B. gaining access to a build through an unguarded entrance
C. gaining access to a server by using a USB stick
D. gaining access to a server room by posing as local IT
【单选题】
Which type of Layer 2 attack enables the attacker to intercept traffic that is intended for one specific recipient？___
A. BPDU attack
B. DHCP starvation I LAB
C. MAC address spoofing
D. CAM table overflow
【单选题】
Which about nested policy maps in a zone-based firewall is true ?___
A. They are limited to two leve ls in a hierarchical policy
B. Parent policies are previously defined policies that are defined by using the service policy command
C. A child policy is a new policy that uses a pre-existing policy.
D. A child policy is a new that uses a pre-existing policy
【单选题】
In which configuration do you configure the ip ospf authentication key 1 command？___
A. routing process
B. interface
C. privileged
D. global
【单选题】
Which statement about command authorization and security contexts is true？___
A. If command authorization is configured， it must be enabled on all contexts.
B. The change to command invokes a new context session with the credentials of the currently
C. AAA settings are applied on a per-context basis
D. The enable. 15 user ang admins with chang to permission ha e dfferent command authorization levels pertontext
【单选题】
Which command do you enter to enable authentication for OSPF on an interface？___
A. router（config-if）#ip ospf message-digest-key 1 md5 CIS COPASS
B. router（config-if）#ip ospf authentication message-digest
C. router（config-if）#ip ospf authentication-key CISCOPASS
D. router（config-if）#area 0 authentication message-digest
【单选题】
What feature defines a campus area network？___
A. It has a single geographic location
B. It lacks external connectivity.
C. It has a limited number of segments.
D. It has limited or restricted Internet access
【单选题】
Which type of attack most commonly involves a direct attack on a network？___
A. :phishing
B. Trojan horse
C. denial of service
D. social engineering
【单选题】
What information does the key length provide in an encryption algorithm?___
A. the cipher block size
B. the hash bloc k size
C. the number of permutations
D. the packet size
【单选题】
How do you verify TaCACS+ connectivity to a device？___
A. You successfully log in to the device by using the local credentials
B. You connect via console port and receive the login prompt.
C. You connect to the device using SSH and receive the login prompt.
D. You successfully log in to the device by using ACS credentials
【单选题】
Which term best describes the concept of preventing the modification of data in transit and in storage？___
A. availability
B. confidentially
C. fidelity
D. integrity
【单选题】
Which loS command is used to define the authentication key for ntp？___
A. switch（config ）#ntp authentication-key 1 mds Clcs
B. switch（config ）#ntp authenticate
C. switch（config）#ntp trusted-key 1
D. switch（config）#ntp source 192.168.0.1
【单选题】
What is true about the cisco lOS Resilient Configuration feature ?___
A. The feature can be disabled through a remote session
B. There is additional space required to secure the primary cisco lOS image file.
C. The feature automatically detects image or configuration version mismatch.
D. Remote storage is used for securing files
【单选题】
When is the default deny all policy an exception in zone-based firewalls？___
A. when traffic terminates on the router via the self zone
B. when traffic traverses two interfaces in different zones
C. when traffic traverses two interfaces in the same zone
D. when traffic sources from the router via the self zone
【单选题】
.If an access port is assigned as an isolated port in a PVLAN， which network ports can it communicate with？___
A. promiscuous ports in the same PLVAN
B. isolated ports in the same PVLAN
C. all ports in the same PAVLAN at ILAR
D. all ports in the adjacent PVLAN
【单选题】
Which IPSEC mode is used to encypt traffic directly between a client and a server VPN endpoint？___
A. quick mode
B. transport mode
C. aggressive mode
D. tunnel mode
【单选题】
Which command do you enter to verify that a vpn connection is established between two endpoints and that the connection is passing traffic？ ___
A. Firewall#sh crypto session
B. Firewall#debug crypto isakmp
C. Firewall#tsh crypto ipsec sa
D. Firewall#sh crypto isakmp sa
【单选题】
which type of Pvlan port allows communication from all port types？___
A. isolated
B. in -line
C. community
D. promiscuous
【单选题】
Which command do you enter to configure your firewall to conceal internal addresses？___
A. no ip directed-broadcast
B. no ip logging facility
C. no proxy-arp
D. no ip inspect audit-trial
E. no ip inspect
F. route
【单选题】
Which feature defines a campus area network？ ___
A. It has a limited number of segments.
B. It has limited or restricted Internet access
C. It lacks ex1ternal connectivity.
D. It has a single geographic location
