【多选题】
Which two options are the primary deployment modeles for mobile device management?___
A. multisite
B. cloud-based
C. on premises
D. hybrid cloud basedo
E. single site
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
BC
解析
暂无解析
相关试题
【多选题】
Drag the recommendation on the left to the Cryptographic algorithms on the right, Options will be used more than once.___
A. Avoid——————————————DES,MD5
B. Legacy——————————————SDES,SHA1,HMAC-MD5
【多选题】
Which two are valid types of vLans using PVLANS ?___
A. Community VLAN
B. Backup VLAN
C. Secondary VLAN
D. Isolated VLAN
E. Isolated VLAN
【多选题】
Which two commands are used to implement Resilient lOS Configuration ___
A. Secure boot-config
B. copy running-config tftp
C. copy flash:ios bin tftp
D. copy running-config startup-config
E. secure boot-image
【多选题】
Which two types of firewalls work at layer 4 and above ?___
A. Stateful inspection
B. Network Address Translation
C. Circuit-Level gateway
D. Static packet filter
E. Application Level firewall
【多选题】
Which two default settings for port security are true ?___
A. Violation is Protect
B. Violation is Restrict
C. Violation is Shutdown
D. Maximum number of MAC addresses is 2
E. Maximum number of MAC addresses is 1
【多选题】
Which two are characteristics of RADIUS?___
A. Uses UDP ports 1812 /1813
B. Uses TCP port 49
C. Uses UDP port 49
D.
E. ncrypts only the password between user and server
【多选题】
When setting up a site-to-site VPN with PSK authentication on a Cisco router, which two elements must be configured under crypto map?___
A. pfs
B. nat
C. reverse route
D. peer
E. transform-set
【多选题】
When using the Adaptive Security Device Manager(ASDM), which two options are available to add a new root certificate?___
A. Install from SFTP server
B. Usehttps
C. Install from a file
D. Use LDAP
E. Use SCEP
【多选题】
Which two SNMPv3 services support its capabilities as a secure networ k manage protocol? ___
A. access control
B. the shared secret key
C. authentication
D. authorization
E. accounting
【多选题】
Which two statements about routed firewall mode are true ?___
A. The firewall acts as a routed hop in the network
B. This mode conceals the presence of the firewall
C. The firewall requires a unique iP address for each interface
D. This mode allows the firewall to be added to an existing networ k with minimal additional configuration By default, this mode permits most traffic to pass throug
【多选题】
Which two statements describe DHCP spoofing attacks?___
A. They are used to perform man-in- the-middle attacks
B. They can access most network devices
C. They can modify the flow of traffic in transit. LNGKAIG
D. They protect the identity of ti attacker by masking the DHCP address
E. They can physically modify the network gateway
【多选题】
Which two types of VLANs using PVLANs are valid?___
A. isolated
B. promiscuous
C. backup
D. secondary
E. community
【多选题】
What are two limitations of the self-zone policies on a zone-based firewall?___
A. They are unable to block Https traffic
B. They restrict SNMP traffic.
C. They are unable to support Https traffic
D. They are unable to implement application inspection
E. They are unable to perform rate limiting
【多选题】
Which two descriptions of TACACS+ are true? ___
A. The TACACS+ header is unencrypted
B. It combines a uthentication and authorization
C. It uses TCP as its transport protocol
D. Only the password is encrypted.
E. It uses UDP as its transport protocol.
【多选题】
Which two actions does an IPS perform? ___
A. it spans the traffic
B. it reflects the traffic back to the sender
C. it encrypts the traffic
D. it terminates the user session or connection of the attacker
E. it reconfigures a device to block the traffic
【多选题】
In which form of fraud does an attacker try to learn information such as login credenti account information by ma squerading as a reputable entity or person in email, IM or communication channels ?___
A. phishing
B. Smurfit
C. Hacking
D. Identity Spoofing
【多选题】
Which two ESA services are available for incoming and outgoing mails ?___
A. anti-DoS
B. reputation filter
C. antispam
D. content filter
E. DLP
【多选题】
What are two reasons to recommend SNMPv 3 over SNMPv2?___
A. SNMPv3 is secure because you can configure authe ntication and privacy
B. SNMPv3 is insecure because it send in formation in clear text
C. SNMPv2 is insecure because it send information in clear text
D. SNMPv3 is a Cisco proprietary protocol
E. SNMPv2 is secure because you can configure authentication and privacy
【多选题】
Which two actions can a zone- based firewall apply to a packet as it transits a zone pair?___
A. drop
B. inspect
C. queue
D. quarantine
【单选题】
Which security principle has been violated if data is altered in an unauthorized manner?___
A. accountability
B. confidentiality
C. availability
D. integrity
【单选题】
Which IKE Phase 1 parameter can you use to require the site-to-site VPN to use a pre-shared ?___
A. encryption
B. authentication
C. group
【单选题】
Which command successfully creates an administrative user with a password of "cisco"on a Cisco router?___
A. username Operator privilege 7 password cisco
B. username Operator privilege 1 password cisco
C. username Operator privilege 15 password cisco
D. username Operator password cisco privilege 15
【单选题】
Which EAP method authenticates a client against Active Directory without the use of client-side 802.1X certificates?___
A. EAP-TLS
B. EAP-MSCHAPv2
C. EAP-PEAP
D.
E. AP-GTC
【单选题】
What is a limitation of network-based IPS?___
A. It must be in dividually configured to support every operating system on the network.
B. It is most effective at the in dividual host level
C. It is unable to monitor attacks across the entire netw ork
D. Large installations require numerous sensors to fully protect the network
【单选题】
When would you configure the ip dhcp snooping trust command on a sw itch?___
A. when the switch is connected to a DHCP server
B. when the switch is working in an edge capacit
C. when the switch is connected to a client system
D. when the switch is serving as an aggregator
【单选题】
How does the 802. 1x supplicant communicate with the authentication server?___
A. The supplicant creates EAP packets and sends them to the authenticator, which encapsulates them into RADIUS and forwards them to the authentication server.
B. The supplicant creates RADIUS packets and sends them to the authe nticator, which encapsulates the m into EAP and forwards them to the a uthentication server.
C. The supplicant creates RADIUS packets and sends them to the authenticator, which translates them into eap and forwards them to the a ut hentication server
D. The supplicant creates
E. AP packets and sends them to the authe nticator, which translates them into radius and forwards them to the authentication server.
【单选题】
Which command do you enter to verify the phase I status of a VPN connection?___
A. sh crypto se ssion
B. debug crypto isakmp
C. sh crypto isakmp sa
D. sh crypto ipsec sa
【单选题】
Refer to the exhibit. what is the e ffect of the given configuration?___
A. It enables authentication,
B. It prevents keychain authentication.
C. The two routers receive normal updates from one another.
D. The two device s are able to pass the message digest to one another.
【单选题】
Which command can you enter to configure OSPF to use hashing to authenticate routing updates?___
A. ip ospf aut hentication message-digest
B. neighbor 192 168.0 112 cost md5
C. ip ospf priority 1
D. ip ospf aut hentication-key
【单选题】
Which command can you enter to verify the status of Cisco lOS Resilient Configuration on a Cisco router?___
A. show secure bootset
B. secure boot-image
C. show binary file
D. ure boot-config
【单选题】
A user on your network inadvertently activates a botnet program that was received as an emai attachment. Which type of mechanism does Cisco Firepower use to detect and block only the botnet attack?___
A. network-based access control rule
B. reputation-based
C. user-ba sed access control rule
D. botnet traffic filter
【单选题】
What does the policy map do in CoPP?___
A. defines service parameters
B. defines packet selection parameters
C. defines the packet filter
D. define s the action to be performed
【单选题】
How is management traffic isolated on a Cisco ASR 1002?___
A. Traffic isolation is done on the vlan level
B. There is no management traffic isolation on a Cisco ASR 1002
C. Traffic is isolated based upon how you configure routing on the device
D. The management interface is configured in a special vRF that provides traffic isolation from the default routing table
【单选题】
Which statement about NaT table evaluation in the asa is true?___
A. After-auto NAT polices are appl d first
B. Manual NAT policies are applied first
C. the asa uses the most specific match
D. Auto NAT policies are applied first
【单选题】
Which information can you display by executing the show crypto ipsec sa command?___
A. ISAKMP SAs that are established between two peers
B. recent changes to the IP address of a peer router
C. proxy infor mation for the connection between two peers
D. IPsec SAs established between two peers
【单选题】
How can you prevent NAT rules from sending traffic to incorrect interfaces?___
A. Assign the output interface in the NAT statement
B. Add the no-proxy-arp command to the nat line.
C. Configure twice NAT instead o bject NAT. 5
D. Use packet-tracer rules to reroute misrouted NAT entries.
【单选题】
What term can be defined as the securing, control, and identification of digital data?___
A. cryptography
B. crypto key
C. cryptoanalysis
D. cryptology
【单选题】
Which feature in the dNS security module provide on and off network DNS protection?___
A. Data Loss Prevention
B. Umbrella
C. Real-time sandboxing
D. Layer-4 monitoring
【单选题】
Which a dverse consequence can occur on a network without BPDu guard ?___
A. The olde st switch can be elected as the root bridge
B. Unauthorized switches that are connected to the network can cause spanning-tree loops
C.
D. ouble tagging can cause the switches to experience CAM table overload.
【单选题】
What configuration is required for multitenancy ?___
A. shared infrastructure
B. multiple carriers
C. co-located resources
D. multiple separate zones
推荐试题
【单选题】
41为了提高三极管放大电路的输入电阻,采用___负反馈 i=i1+i2
A. 电流
B. 电压
C. 并联
D. 串联
【单选题】
42为了稳定输出电流,采用___负反馈。
A. 电流
B. 电压
C. 并联
D. 串联
【单选题】
43为了改善放大器的动态性能,应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
44为了稳定放大器的静态工作点,应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
45共模抑制比是差分放大电路的一个主要技术指标,它反映放大电路___能力。
A. 放大差模抑制共模
B. 输入电阻高
C. 输出电阻低
【单选题】
46差分放大电路是为了___而设置的。
A. 稳定Au
B. 放大信号
C. 抑制零点漂移
【单选题】
47分析运放的“虚短”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. U0=Ui
D. U-≈U+≈0
【单选题】
48分析运放的“虚断”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. I-≈I+
D. U-≈U+≈0
【单选题】
51两级放大电路,Au1=-40,Au2=-50,若输入电压U1=5mv,则输出电压Uo为 ___
A. -200mv;
B. -250mV;
C. 10V;
D. 100V
【单选题】
52通用型集成运放的输入级多采用___。
A. 共基接法
B. 共集接法
C. 共射接法
D. 差分接法
【单选题】
53理想运放的两个重要性质是___。
A. 虚短与虚地
B. 虚断与虚短
C. 断路与短路
【单选题】
54振荡器的输出信号最初由___而来的。
A. 基本放大器
B. 选频网络
C. 干扰或噪声信号
【单选题】
55产生正弦波自激震荡的稳定条件是___。
A. 引入正反馈
B. |AF|≥1
C. AF=1
【单选题】
56从结构上来看,正弦振荡电路是一个 ___ 。
A. 有输入信号的负反馈放大器;
B. 没有输入信号的带选频网络的正反馈放大器;
C. 没有输入信号的不带选频网络的正反馈放大器。
【单选题】
57对频率稳定度要求较高的振荡器,要采用: ___ 。
A. LC振荡电路;
B. RC振荡电路;
C. RL振荡电路;
D. 石英晶体振荡电路。
【单选题】
58在甲类、乙类、甲乙类放大电路中,其导通角分别为___
A. 小于180 O、180 O、360O
B. 360O、180 O、小于180 O。
C. 180 O、小于180 O、360O
【单选题】
W78XX系和列W79XX系列引脚对应关系为 ___ 。
A. 一致;
B. 1脚与3脚对调,2脚不变;
C. 1、2对调。
【单选题】
60两个β相同的晶体管组成复合管后,其电流放大系数约为 ___ 。
A. β
B. β2
C. 2β
D. 1+β
【单选题】
1三极管的开关特性是___。
A. 截止相当于开关接通
B. 放大相当于开关接通
C. 饱和相当于开关接通
D. 截止相当于开关断开,饱和相当于开关接通
【单选题】
2数字集成门电路,目前生产最多应用最普遍的门电路是___
A. 与门
B. 或门
C. 非门
D. 与非门
【单选题】
3由一个三极管组成的基本门电路是___。
A. 与门
B. 非门
C. 或门 、D异或门
【单选题】
4在遥测系统中,需通过___把非电量的变化转变为电信号。
A. 电阻器、
B. 电容器、
C. 传感器、
D. 晶体管
【单选题】
5半导体发光数码管由___个条状的发光二极管组成。
A. 5
B. 6
C. 7
D. 8
【单选题】
6“有0出1,全1出0”属于___
A. 与逻辑
B. 或逻辑
C. 非逻辑
D. 与非逻辑
【单选题】
7二进制数11101转化成十进制数为___
A. 29
B. 57
C. 4
D. 15
【单选题】
8TTL系列集成芯片工作电源电压的典型值是___。
A. 18V
B. 5V
C. 3V
D. 10V
【单选题】
9能实现Y=0的电路是___图。
A. 图
B. 图
C. 图
D. 图
【单选题】
10以下表达式中符合逻辑运算法则的是___。
A. 1+1=10
B. A+A=2A
C. A+=1.
D. A·=1
【单选题】
11对于TTL与非门闲置输入端的处理,不可以___
A. 与有用输入端并联
B. 通过电阻3kΩ接电源
C. 接地
D. 接电源
【单选题】
12十线/四线优先编码器74LS147所用的输出代码为___。
A. 5421BCD码
B. 格雷码
C. 8421BCD码
D. 余3码
【单选题】
13为实现“线与”逻辑功能,应选用___
A. OC门
B. 与门
C. 异或门
D. 同或门
【单选题】
14和逻辑式A+ABC相等的式子是___
A. c
B. bc
C. abc
D. a
【单选题】
15逻辑函数的表示方法中具有唯一性的是___
A. 真值表
B. 表达式
C. 逻辑图
D. 卡诺图
【单选题】
16与模拟电路相比,数字电路主要的优点是___。
A. 容易设计
B. 通用性强
C. 抗干扰能力强
【单选题】
17某门电路的输入输出波形如图所示,试问此逻辑门的功能是___。
A. 与非
B. 或非
C. 异或
D. 同或
【单选题】
18以下电路中常用于总线应用的有___。
A. TSL门
B. OC门
C. 漏极开路门
D. CMOS与非门
【单选题】
逻辑表达式Y=AB可以用___实现。
A. 正或门
B. 正非门
C. 正与门
D. 负或门
【单选题】
20TTL电路在正逻辑系统中,以下各种输入中___相当于输入逻辑“0”。
A. 悬空
B. 通过电阻2.7kΩ接电源
C. 通过电阻2.7kΩ接地
D. 通过电阻510Ω接地
【单选题】
21对于TTL与非门闲置输入端的处理,不可以___。
A. 接电源
B. 通过电阻3kΩ接电源
C. 接地
D. 与有用输入端并联
【单选题】
22STTL数字集成电路与CMO数字集成电路相比突出的优点是___。
A. 微功耗
B. 高速度
C. 高抗干扰能力
D. 电源范围宽