【单选题】
根据《消防安全工作管理办法》的规定,下列不属于表彰或奖励的行为是___。
A. 对火险隐患发现及时、整改措施有力,消防器材确保完好
B. 热爱消防工作,积极参加防火宣传、教育、学习、训练,自觉遵守消防法规,为防火工作作出显著成绩者
C. 关心消防安全工作,积极提出合理化建议,对消除火险隐患,防止火灾事故发生有明显成绩者
D. 对火灾事故隐瞒不报,对事故现场保护不力,影响事故原因查证的。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
公务票补办期间,应购买车票进出车站付费区,不得以各种理由要求___开启通道。
A. 设备维修人员
B. 车站服务人员
C. 值班站长
D. 保洁人员
【单选题】
拒不配合车站客运服务人员、稽查人员检查的,停用公务票___。
A. 1个月
B. 2个月
C. 3个月
D. 6个月
【单选题】
对涉及违规使用公务票的员工,没收公务票并停用___,在此期间乘坐轨道交通费用自理。
A. 1个月
B. 2个月
C. 3个月
D. 6个月
【单选题】
对涉及违规使用公务票的员工,除没收公务票并停用一定时间外,首次给予警告处分、第二次给予记过处分,并处以___元经济处罚,扣除12个月的岗位绩效,取消三年各类先进评选资格。
A. 500
B. 1000
C. 2000
D. 3000
【单选题】
公务票的种类包括:___。
A. 工作证
B. 通勤证
C. 通勤计次卡
D. 其它选项都是
【单选题】
《公务票管理规定》适用的对象包括:___。
A. 在职的正式员工
B. 劳务、派遣工
C. 委外单位员工
D. 其它选项都是
【单选题】
以下不属于供电公司企业精神的是___。
A. 安全至上
B. 创新管理
C. 保障有力
D. 追求卓越
【单选题】
供电公司的管理方针是___。
A. 维护到位,保障有力
B. 高效快捷,质优经济
C. 兢兢业业,恪守原则
D. 维护优质,杜绝故障
【单选题】
接报抢修响应速度是___分钟。
A. 60
B. 30
C. 20
D. 10
【单选题】
供电公司的主要的生产部门划分有变电运行部、变电检修部以及___。
A. 触网检修部
B. 组织人事部
C. 技术部
D. 财务部
【单选题】
供电公司的生产计划主要分为年度计划、季度计划和___。
A. 每周计划
B. 日计划
C. 月度计划
D. 半年计划
【单选题】
对职工因工伤亡事故和其他严重危害职工健康问题的调查处理。___
A. 工会有权参加
B. 必须有工会参加
C. 由劳动行政部门通知工会参加
D. 由人民政府组织有关部门和工会进行
【单选题】
劳动者的职业健康检查费用由___承担。
A. 用人单位
B. 劳动者
C. 劳动者和用人单位共同
D. 政府
【单选题】
长时间吸入含高浓度二氧化碳的空气,会令人产生___感觉。
A. 兴奋
B. 情绪高涨
C. 昏睡
D. 悲伤
【单选题】
事故和隐患之间的关系是___。
A. 前者是后者的必然条件
B. 后者是前者的必然条件
C. 后者是前者的可能性
D. 没有联系
【单选题】
在照明供电的线路上保险丝起___保护作用。
A. 超载
B. 短路
C. 超载及短路
D. 开路
【单选题】
测量绝缘电阻通常用___电工仪表。
A. 万用表
B. 兆欧表
C. 奥姆表
D. 电压表
【单选题】
下列___灭火剂,是不适合扑救电器故障所引致的火警。
A. 二氧化碳
B. 泡剂
C. 干粉剂
D. 气体
【单选题】
以下在上海地铁中用到的接触网形式是___。
A. 柔性触网
B. 钢性触网
C. 接触轨
D. 前三项都是
【单选题】
以下那些工作不属于供电公司运行值班人员职责范围___。
A. 区间施工可能碰及触网,要求停电并挂设接地线的工作。
B. 变电站倒闸操作后,做安全措施验电并挂设接地线的工作。
C. 应电力调度要进入区间手动操作触网闸刀的工作。
D. 向电力调度汇报现场设备故障情况。
【单选题】
以下不是供电公司职责范围内的工作是___。
A. 变电站设备倒闸操作
B. 直流屏交直流切换
C. 站内事故风机试验
D. 变电站夜间熄灯检查
【单选题】
情节严重的[如引起烟温感探测器报警的、造成一定影响与后果的]事故,由其所在责任部门根据《职工手册》有关奖惩条款和相关规定向公司组织人事部门提出对其行政处分建议,并考核当事人___绩效工资。
A. 三个月
B. 六个月
C. 九个月
D. 十二个月
【单选题】
影响严重的事故,其所在责任部门可向供电分公司组织人事部门提出予以除名建议,经供电分公司研究确定后由人事部门按规定程序办理___。
A. 签订劳动合同手续
B. 解除劳动合同手续
C. 记大过处分
D. 记小过处分
【单选题】
吸烟行为直接导致火灾构触犯___的,移交公安司法机关处理,公司按规定给予解除劳动合同。
A. 规定
B. 刑律
C. 劳动法
D. 司法
【单选题】
吸烟行为虽未被当场查获,但有证据表明该禁烟区确有吸烟行为的,当时在场人员___。
A. 给予批评
B. 以后注意
C. 没有责任
D. 负有同等责任
【单选题】
对员工进行考核扣款的,员工月实际收入不得低于上海市规定___标准,按规定扣款后低于此标准的,可分月扣款。
A. 一般
B. 平均工资线
C. 最高工资线
D. 最低工资线
【单选题】
测量接地电阻,涂写杆塔号,悬挂警告牌,修剪树枝,检查杆根地锚,打绑桩,杆、塔基础上的工作,低压带电工作和单一电源低压分支线的停电工作等,按___命令执行。
A. 无需
B. 口头
C. 电话
D. 口头和电话
【单选题】
___可由线路工区[所]熟悉人员技术水平熟悉设备情况、熟悉本规程的主管生产领导人、技术人员或经供电公司主管生产领导[总工程师]批准的人员来担任。(A)不得兼任该项工作的工作负责人。
A. 工作票签发人
B. 工作票许可人
C. 工作票负责人
D. 工作票签收人
【单选题】
工作票应用钢笔或圆珠笔填写一式两份,应正确清楚,不得任意涂改。如有个别错、漏字要修改时,应字迹清楚。工作票一份交___,一份留存签发人或工作许可人处。
A. 工作票签发人
B. 工作票许可人
C. 工作负责人
D. 工作票签收人
【单选题】
第一种工作票,每张只能用于一条线路或同杆架设且停送电时间相同的几条线路。第二种工作票,对同一电压等级、同类型工作,可在数条线路上共用一张工作票。在工作期间,工作票应始终保留在工作负责人手中;工作终结后交签发人保存___。
A. 一个月
B. 二个月
C. 三个月
D. 四个月
【单选题】
填用第一种工作票进行工作,工作负责人必须在得到___或变电所值班员的许可后,方可开始工作。
A. 区域站长
B. 值班站长
C. 电力调度员
D. 行车调度员
【单选题】
线路停电检修,___必须在变电所将线路可能受电的各方面都拉闸停电,并挂好接地线后,将工作班、组数目,工作负责人的姓名,工作地点和工作任务记入记录簿内,才能发出许可工作的命令。
A. 区域站长
B. 值班站长
C. 电力调度员
D. 行车调度员
【单选题】
对于许可开始工作的命令,在值班调度员不能和工作负责人用电话直接联系时,可经___用电话传达。值班员应将命令全文记入操作记录簿,并向工作负责人直接传达。电话传达时,上述三方必须认真记录,清楚明确,并复诵核对无误。
A. 广播
B. 变电所
C. 车控室
D. 值守点变电所
【单选题】
工作票签发人和___,对有触电危险、施工复杂容易发生事故的工作,应增设专人监护。专责监护人不得兼任其他工作。
A. 电力调度
B. 工作票许可人
C. 工作负责人
D. 工作票签收人
【单选题】
所有工作人员包括___,不许单独留在高压室内和室外变电所高压设备区内。
A. 电力调度
B. 工作票许可人
C. 工作负责人
D. 工作票签收人
【单选题】
值班员如发现工作人员违反安全规程或任何危及工作人员安全的情况,应向___提出改正意见,必要时可暂时停止工作,并立即报告上级。
A. 电力调度
B. 工作票许可人
C. 工作负责人
D. 工作票签收人
【单选题】
在未办理工作票终结手续以前,值班员不准将施工设备合闸送电。在工作间断期间,若有紧急需要,值班员可在工作票终结的情况下合闸送电,但应先将工作班全体人员已经离开工作地点的确切根据通知工作负责人或工作单位生产负责人,在得到他们可以送电的答复后方可执行,并应采取下列措施:拆除临时接地线、遮拦和标志牌,恢复常设遮拦,换挂___的标志牌。
A. 禁止合闸
B. 禁止入内
C. 止步,高压危险
D. 在此工作
【单选题】
检修工作结束以前,若需将设备试加工作电压,可按下列条件进行:全体工作人员撤离工作地点;将该系统的所有工作票收回,拆除临时遮拦,接地线和标志牌,恢复常设遮拦;应在工作负责人和___进行全面检查无误后,由值班员监护下进行加压试验。
A. 电力调度
B. 工作票许可人
C. 工作负责人
D. 值班员
【单选题】
在同一电气连接部分用同一工作票依次在几个工作地点转移工作时,全部安全措施由值班员在开工前一次做完,不需再办理转移手续,但工作负责人在转移工作地点时,应向工作人员交待___、安全措施和注意事项。
A. 送电事项
B. 带电范围
C. 停电范围
D. 停电事项
【单选题】
工作终结后,工作负责人应报告工作许可人和___,报告方法如下:从工作地点回来后,亲自报告;用电话报告并经复诵无误。电话报告又可分为直接电话报告或经由中间变电所转达两种。
A. 电力调度
B. 工作票签发人
C. 工作负责人
D. 工作票签收人
推荐试题
【多选题】
An administrator is deploying multiple Windows 2003 Virtual Machines from the same template. What two steps should be taken to avoid network conflicts? (Choose two.)___
A. Customize the guest operating system.
B. Install VMware Tools into the new virtual machines.
C. Copy the Microsoft Sysprep tools onto the vCenter Server system.
D. Ensure the e1000 vmnic is selected for each new virtual machine.
【多选题】
Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)___
A. The datastores planned for the solution are used by different vSphere clusters.
B. A datastore planned for the solution is configured as a Raw Device Mapping file.
C. A datastore planned for the solution has three extents.
D. A datastore planned for the solution is configured as NFS.
E. The organization has an Enterprise license.
【多选题】
Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose two.)___
A. Verify that there is at least one Distributed Port Group on the Distributed Switch.
B. Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.
C. Verify that the
D. istributed Switch has been configured with a Network Profile.
【多选题】
An organization has configured Distributed Power Management (DPM) on a vSphere 6 cluster. The organization wants to be alerted when an ESXi host has been powered down by DPM. Which two options represent the type and name of the alarm that would accomplish this? (Choose two.)___
A. DrsEnteringStandbyModeEvent
B. DrsEnteredStandbyModeEvent
C. Event-based
D. Condition-based
【多选题】
Which two allow for the disabling of Network Rollback operations? (Choose two.)___
A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key
B. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the<rollback> xml tag
C. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the <networkrollback> xml tag
D. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\firstboot\vpxd-service- spec.prop file and adjusting the <rollback> xml tag
【多选题】
An administrator is tasked with performing a vMotion migration of a virtual machine. The virtual machine is configured as follows: <vSphere Flash Read Cache (vFRC) enabled> <Is part of a Distributed Resource Cluster (DRS) Cluster> Which two statements are true? (Choose two.)___
A. Each ESXi host in the cluster supports multiple virtual flash resources.
B. Each ESXi host in the cluster supports one virtual flash resource.
C. DRS treats powered-on virtual machines with Flash Read Cache as having a preferred affinity to their current host and moves them only for mandatory reasons.
D. DRS treats powered-on virtual machines with Flash Read Cache as having a required affinity to their current host and does not move them.
【多选题】
An administrator is using the Host Failures to Tolerate Admission Control Policy for a vSphere High Availability ___ cluster. When configuring this setting on the cluster, the administrator sees this error message: <Insufficient resources to satisfy HA failover level on cluster > What are two likely causes for the error? (Choose two.)(AB)
A. The hosts in the cluster are disconnected.
B. A host in the cluster is displaying an HA error.
C.
D. istributed Resource Scheduler has not been configured on the cluster.
【多选题】
What are two ways to identify TCP/IP stack information? (Choose two.)___
A. Using the vSphere Web Client
B. Using esxcli network ip netstack
C. Using esxcfg-netstack
D. Using the vSphere Client
【多选题】
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)___
A. A value in the Virtual Flash Read Cache text box must be entered.
B. A Flash Resource Pool for Cache size reservation must be entered.
C. The Device backing and the block size must be configured.
D. The
E. nable virtual flash host swap cache check box must be selected.
【多选题】
What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)___
A. Networks
B. Applications
C. Storage
D. Management
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
【多选题】
An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the Configure Replication wizard. Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)___
A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.
B. vSphere Replication uses the virtual machine's snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.
C. vSphere Replication does not support virtual machines with snapshots.
D. vSphere Replication supports virtual machines with snapshots.
【多选题】
An administrator is virtualizing a physical application server and adding it to an existing multi-tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the administrator needs to ensure the license will function properly in the virtual machine. Which two actions can the administrator take to satisfy this task? (Choose two.)___
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
【多选题】
Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)___
A. Single-Initiator
B. Single-Initiator-Single-Target
C. Multiple-Initiators-Single-Target
D. Multiple-Initiators-Multiple-Targets
【多选题】
An administrator is attempting to remove an ESXi 6.x host from a vSphere Distributed Switch (vDS). When the administrator attempts to remove the host, the following error is observed: <The resource '16' is still in use.> What three steps are needed to successfully remove the host from the switch? (Choose three.)___
A. Select Manage Ports on the vDS for the host.
B. Locate all ports currently in use on the vDS for the host.
C. Migrate or delete any vmkernel or virtual machine adapters associated with the switch.
D. Remove all network cards from the switch before trying to remove the host.
E. Create a standard switch for everything to be automatically be migrated to.
【多选题】
Which two Virtual SAN related actions might start resynchronization of virtual machine objects? (Choose two.)___
A. Editing a virtual machine storage policy to increase the number of replicas.
B. Editing a virtual machine storage policy to reduce the number of replicas.
C. Editing a virtual machine storage policy to increase the number of disk stripes.
D. Editing a virtual machine storage policy to reduce the number of disk stripes.
【多选题】
An administrator is troubleshooting basic network connectivity issues. Which two scenarios are potential issues that this administrator might face? (Choose two.)___
A. The vSwitch is not attached to the correct physical network.
B. The portgroup is not configured to use correct VLAN.
C. Traffic shaping is configured incorrectly.
D. Jumbo frames is configured incorrectly.
【多选题】
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)___
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo
F. rames.
【多选题】
An administrator is performing an interactive installation of ESXi 6.x. Which three options are available for installation? (Choose three.)___
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
【多选题】
After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change. What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)___
A. Login to the Direct Console User Interface and change it from here.
B. Edit the Default TCP/IP Configuration from the vSphere Web Client.
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.
D. Update the information in DNS and the
E. SXi host will automatically update with these changes.