【单选题】
Which of the following is not included in the ATC clearance? ___
A. Aircraft callsign
B. Flight route
C. Wind direction and speed
D. Clearance limit
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
“Recycle squawk A0612”means______.___
A. reselect squawk number A0612
B. don’t use A0612
C. who is squawking A0612
D. squawk A0612
【单选题】
“A575”is a name of a route.“A”means_________
A. the order
B. the first kind
C. main south and north direction
D. no special meaning
【单选题】
“FMC”is a system in an aircraft to manage the______.___
A. met message
B. flight data
C. flight pitch
D. flight roll
【单选题】
“Deteriorating weather”means the weather is getting______.___
A. better
B. clear
C. good
D. worse
【单选题】
Azimuth means horizontal______or direction. ___
A. heading
B. direction
C. bearing
D. scale
【单选题】
According to characters and conditions of flights on the route,ATS route is divided into______and______route. ___
A. domestic,international
B. fixed,temporary
C. regional,national
D. civil,military
【单选题】
Fuel______means the quantity of fuel carried by now. ___
A. reminding
B. endurance
C. number
D. total
【单选题】
The opposite meaning of“speedup”is_________
A. slowdown
B. speeddown
C. speedlow
D. slowby
【单选题】
Pilot turns on squawk______to request a squawk number. ___
A. 3000
B. 3500
C. 4000
D. 2000
【单选题】
First______assistance means doctor and ambulance in an emergency condition. ___
A. emergency
B. priority
C. aid
D. help
【单选题】
When somebody is reported hurt on board,maybe it will need______assistance on arrival. ___
A. fire-cart
B. medical
C. police
D. wheelchair
【单选题】
In emergency descent procedure,the pilot should turn right______out of the route while descending. ___
A. 40°
B. 30°
C. 20器
D. 15°
【单选题】
管制员在对空指挥过程中,越是繁忙的时候,语速应___
A. 保持平稳,避免频繁重复指令
B. 尽量快些,才能指挥更多飞机
C. 降低语速,避免口误
D. 时快时慢,引起机组的注意
【单选题】
According to ICAO,a standard holding pattern should all turn to the______.___
A. right
B. west
C. left
D. east
【单选题】
The standard altimeter setting is______inhpa. ___
A. 1013.20062
B. 1010.10062
C. 29.92002
D. 30.10002
【单选题】
2500f/m rate of vertical speed is equal to______.___
A. 10m/s
B. 15m/s
C. 20m/s
D. 25m/s
【单选题】
陆空通话时,什么时候推荐使用“IMMEDIATELY(立即)”这个词:___
A. 相对飞行穿高度时
B. 天气差时,担心自己会忘记某个正在改变高度的动态
C. 飞机多时,为了节省精力
D. 在紧急情况下,用于冲突解脱时
【单选题】
Standard rate for a turning is______degrees per second. ___
A. 4
B. 6
C. 3
D. 2
【单选题】
What is the best course of action for a pilot to follow when thunderstorms are observed along the route of flight? ___
A. Fly below the thunderstorms
B. Climb over the thunderstorms
C. Disregard the thunderstorms
D. Take any action to avoid all thunderstorms
【单选题】
The subdivision of frequencies is______MHZ. ___
A. 0.025
B. 0.035
C. 0.02
D. 0.015
【单选题】
Aeronautical chart is divided into two categories,______. ___
A. Aeronautical map and special type of aeronautical chart
B. En-route chart and approach chart
C. Area chart and standard instrument arrival and departure chart
D. Aerodrome chart and area chart
【单选题】
Aircraft are required to comply with ATC instructions within______.___
A. advisory airspace
B. domestic airspace
C. controlled airspace
D. international airspace
【单选题】
Amendments to the initial clearance will be issued at anytime an air traffic controller deems such action necessary to______.___
A. avoid possible confliction between aircraft
B. correct the previously issued clearance
C. cancel the flight plan
D. expedite the traffic
【单选题】
研究表明,当耳机话筒的位置距离嘴( )英寸且稍微偏下时,传输的声音质量最佳。(注:1英寸=2.54CM)___
A. 0.25-0.5
B. 0.75-1
C. 1.25-1.5
D. 1.75-2
【单选题】
“I want to divert to shanghai” is equal to______.___
A. I want to our destination Shanghai
B. I want to overfly Shanghai
C. I want to alternate to land at Shanghai
D. I want to call Shanghai control
【单选题】
When an aircraft is being subjected to unlawful interference, the pilot should try to notify _______ of this fact.___
A. the appropriate ATC units
B. company
C. the passengers on board
D. air attendants
【单选题】
When pilot say“Did you pick it upon your screen?”,that means______.___
A. did you pick up your screen?
B. did you see it on your screen?
C. did your screen pick me up?
D. did you change your radar?
【单选题】
ATC clearance does not contain______.___
A. clearance limit
B. altitude data
C. route of flight
D. flight direction
【单选题】
When pilot sets an altimeter setting to a QNH,that will indicate_________
A. flight level
B. altitude
C. height
D. safety level
【单选题】
When pilots set a pressure of 29.92 in mercury to indicate_________
A. altitude
B. height
C. flight level
D. safety level
【单选题】
管制员还应当对管制指令当中的不同内容进行适当的排序,相对重要的内容应当排列在管制指令的 ( )位置___
A. 前面
B. 中间
C. 尾部
D. 以上都可以
【单选题】
When Beijing time is 0801,Zulu time should be______.___
A. 2001
B. 1
C. 601
D. 1601
【单选题】
Emergency frequency is______.___
A. 121.5MHZ
B. 120.5MHZ
C. 121MHZ
D. 119.0MHZ
【单选题】
“PAN” is the international RTF______signal___
A. emergency
B. distress
C. urgency
D. dangerous
【单选题】
“MAYDAY” is the international RTF______signal.___
A. emergency
B. distress
C. urgency
D. dangerous
【单选题】
According to ICAO definition, a condition concerning the safety of an aircraft or other vehicle or of some person on board or within sight but which does not require immediate assistance is _______ .___
A. urgency
B. dangerous
C. emergency
D. distress
【单选题】
Which SSR Code is not right?___
A. 7020
B. 8025
C. 6060
D. 4021
【单选题】
______is the accepted standard for worldwide time signal broadcast used for aviation.___
A. GMT
B. LT
C. UTC
D. SST
【单选题】
_____means the level is measured in 1013.2 pha___
A. Level
B. Height
C. Altitude
D. Flight level
【单选题】
An aircraft known or believed to be in a state of emergency should be given______over other aircraft.___
A. way
B. flight plan
C. instruction
D. priority
推荐试题
【单选题】
基轴制的孔是配合的基准件,称为基准轴,其代号为___。
A. n
B. h
C. k
D. m
【单选题】
可选用___来测量孔内径是否合格。
A. 水平仪
B. 圆规
C. 内径千分尺
D. 杠杆百分表
【单选题】
标准公差用 IT 表示,共有___个等级。
A. 8
B. 7
C. 55
D. 20
【单选题】
在每日检查时,若液压系统的油标在两根红线之间则是___的。
A. 不正常
B. 正常
C. 过量
D. 过少
【单选题】
国家对孔和轴各规定了___个基本偏差。
A. 9
B. 12
C. 28
D. 58
【单选题】
在正常情况下,液压系统的油温应控制在___。
A. 10 摄氏度以下
B. 15 摄氏度以上
C. 5 摄氏度
D. 3 摄氏度
【单选题】
封闭环是在装配或加工过程的___阶段自然形成的一环。
A. 最开始
B. 中间
C. 最后
D. 任一
【单选题】
三坐标测量机是一种高效精密测量仪器,其测量结果___。
A. 只显示在屏幕上,无法打印输出
B. 只能存储,无法打印输出
C. 可绘制出图形或打印输出
D. 既不能打印输出,也不能绘制出图形
【单选题】
基准代号由基准符号、圆圈、连线和___组成。
A. 字母
B. 数字
C. 弧线
D. 三角形
【单选题】
符号“∠”在位置公差中表示___。
A. 倾斜度
B. 高度
C. 平面度
D. 全跳动
【单选题】
换刀点是加工中心刀具___的地方
A. 自动更换模具
B. 自动换刀
C. 回参考点
D. 加工零件入刀
【单选题】
当机件具有倾斜机构,且倾斜表面在基本投影面上投影不反映实形,可采用___表达。
A. 局部视图
B. 斜视图
C. 主视图
D. 左视图
【单选题】
半精车的工序余量为___mm。
A. 2.9
B. 21.1
C. 0.79
D. 1.1
【单选题】
用剖切面将机件完全剖开后的剖视图称为___。
A. 主视图
B. 全剖视图
C. 侧剖视图
D. 右视图
【单选题】
程序中的每一行称为一个___。
A. 坐标
B. 字母
C. 符号
D. 程序段
【单选题】
金属材料剖切面用___表示。
A. 虚线
B. 45o细实线
C. 点划线
D. 80o粗实线
【单选题】
定位销用于工件圆孔定位,其中,短圆柱销限制___个自由度。
A. 6
B. 2
C. 4
D. 8
【单选题】
下面___属于齿轮刀具。
A. 刨刀
B. 拉刀
C. 蜗轮刀
D. 板牙
【单选题】
___表示绝对方式指定的指令。
A. G00
B. G01
C. G90
D. G91
【单选题】
刀具直径为 8mm 的高速钢立铣铸铁件时,主轴转速为 1100r/min,切削度为___。
A. 11m/min
B. 28m/min
C. 32m/min
D. 50m/min
【单选题】
加工内廓类零件时,___。
A. 要留有精加工余量
B. 为保证顺铣,刀具要沿内廓表面顺时针运动
C. 不用留有精加工余量
D. 为保证顺铣,刀具要沿工件表面左右滑动
【单选题】
支承板用于已加工平面的定位,限制___个自由度。
A. 6
B. 2
C. 4
D. 8
【单选题】
三坐标测量机基本结构主要有机床、___组成。
A. 放大器、双向目镜三大部分
B. 编辑器、数据处理系统、反射灯四大部分
C. 驱动箱两大部分
D. 传感器、数据处理系统三大部分
【单选题】
对于位置精度要求较高的工件,不宜采用___。
A. 专用夹具
B. 通用夹具
C. 组合夹具
D. 三爪长盘
【单选题】
油黏度过高可能是造成___现象的因素之一。
A. 油泵有噪声
B. 油压不稳定
C. 油泵不喷油
D. 油泵损坏
【单选题】
支承钉主要用于平面定位,限制___个自由度。
A. 10
B. 1
C. 7
D. 20
【单选题】
___表示主轴定向停止的指令。
A. M99
B. G111
C. M19
D. G93
【单选题】
___不属于压入硬度试验法。
A. 布氏硬度
B. 洛氏硬度
C. 莫氏硬度
D. 维氏硬度
【单选题】
定位销用于工件圆孔定位,其中,长圆柱销限制___个自由度。
A. 6
B. 4
C. 2
D. 8
【单选题】
为改善低碳钢加工性能应采用___。
A. 淬火或回火
B. 退火或调质
C. 正火
D. 调质或回火
【单选题】
圆柱心轴用于工件圆孔定位,限制___个自由度。
A. 10
B. 12
C. 4
D. 9
【单选题】
灰铸铁中的碳主要是以___形式存在。
A. 渗碳体
B. 片状石墨
C. 渗碳体或球状石墨
D. 渗碳体或团絮状石墨
【单选题】
V 形架用于工件外圆定位,其中,长 V 形架限制___个自由度。
A. 10
B. 12
C. 4
D. 9
【单选题】
钢件发蓝处理可以使工件表面形成以___为主的多孔氧化膜。
A. NaO
B. Fe3O4
C. FeO3
D. Za(OH)
【单选题】
定位套用于外圆定位,其中,短套限制___个自由度。
A. 10
B. 12
C. 2
D. 9
【单选题】
中小型立式加工中心常采用___立柱。
A. 移动式实心
B. 移动式空心
C. 固定式实心
D. 固定式空心
【单选题】
有色金属、不锈钢测疲劳极限时,应力循环周次应为___次。
A. 10的15次方
B. 10的16次方
C. 10的13次方
D. 10的8次方
【单选题】
___表示主轴反转的指令。
A. M90
B. G01
C. M04
D. G91
【单选题】
感应加热淬火时,若频率为 50kHZ,则淬硬层深度为___。
A. 17—22.5mm
B. 16—18mm
C. 1—2.5mm
D. 10—15mm
【单选题】
常用地址符___代表进给速度。
A. I
B. F
C. D
D. Z